[Ensemble] WE06 ROF 30 rps, ETU burst mode, binary, precocking [WELL PRO] + Chargeur capacité variable 30/80 billes pour WE06 [WELL]

un dsg pour un si petit prix c'est juste incroyable. la réplique parfaite pour du cqb. petite, légère avec une cadence de barge.pour le prix de la réplique c'est juste dingue merci a well et a Taiwangun de proposer se genre de petite pépite. je ne regrette en rien mon achats

Rien à dire de négatif mis à part que l’interne est pas super bien calé, mais on peut y remédier en 20 secondes top chrono. Prenez l’interne du chargeur, enroulez le dans une feuille de papier et remettez le dans sa coque et hop, plus de jeu entre la coque et l’Interne. Et le petit téton pour remonter les billes jusqu’en haut du bloc hop-up c’est vraiment bien, aucune bille voir une maximum de perdu

Chargeur de très bonne qualité ils nourrissent de la billes lourde sans problèmes.
Ils sont en plastique fibré de super qualité avec le talon en acier ils ont même le logo de kalashnikov concern.
C'est fiable c'est pas chère quoi dire de plus vu le prix il n'y a pas a hésiter !

Chargeur conforme a la replique WE06

Well Pro a réussi a faire un tres bon boulot avec cette gamme.

Pas de probleme de feed ou autres, pour le prix des chargeurs je suis assez surpris et en positif !

Vous pouvez commandez sans probleme

"Well" performances for the price ! Fast and precise. Only the full plastic body can disapoint the full metal lover. Good finition for me.
Problem with the stock on my model. I can not lock the stock on the side of the replica. A lock pin doesn't stay on position, bad fixation i guess.
Overall i am satisfied.

Pour ma part j'ai été grandement surpris par la qualité générale de la réplique. Pour un prix contenu,vous obtenez une réplique en DSG avec un etu programmable! Attention cependant à ne pas activer de precocking, vous risquez d'endommager l'interne, et de toute façon, vous n'avez pas besoin de ça, tellement la réplique est joueuse. Elle réponds ultra rapidement a la moindre pression sur la détente, en CQB cela vous apportera l'avantage face a vos adversaires.

Le hop UP fonctionne a merveille, les chargeurs feed sans problème en full auto a 30 bbs/sec

Les matériaux peuvent vous laisser perplexe, mais une fois en mains, vous n'aurez plus de doute quand a la qualité de fabrication de la réplique.
Je vois beaucoup de gens dire que le MOSFET se coupe de temps à autre, effectivement cela m'est arrivé, mais je préfère cela, entre chaque partie, vérifiez la tension de votre batterie Lipo, débranchez et rebranchez votre batterie, cela ne prends que quelques secondes.
Les chargeurs peuvent être bridé a 30 bbs ou laissé a 80 bbs, ils sont très solide.
Il ne faut pas oublier que cette réplique est en polymère, donc traitez la avec respect, elle vous le rendra 1000fois.

Bien joué WELL et merci TAIWANGUN pour cette réplique hors du commun !

Un chargeur qui se règle facilement avec un choix de 30 ou 90 billes c'est très pratique le chargeur s'enlève facilement . Attention avec ça taille assez grande il peut ne pas passer dans toutes les poches

4 étoiles seulement à cause d'un très léger jeu latéral sur la réplique. Fonctionnement impeccable, rentre (mais bien serré) dans des pouches pour mp5.
Le poussoir de chareur permet de tirer toutes les billes, pas de perte.

Très bonnes perfs en sortie de boîte (45m utiles), aucun jeu nulle part, ETU simple à régler et fonctionnant très bien, léger et ergonomique, utilisé avec des chargeurs AK (c'est possible en retirant le puits de chargeur), jusque-là, aucun reproche à faire. A voir la fiabilité/solidité dans le temps.
Très satisfait de mon achat.

Výborné spracovanie odolný materiál , dobre sedí v šachte žiadne vrzganie, rýchle dodanie, pred prvým použitím odporúčam naplniť do polovice aby sa nepoškodili bežec následne po pár pouzitiach prenášať suchým mrazivom aby s apripadne nečistoty nesasekavali pomedzi bbcka

Výborné spracovanie odolný materiál , dobre sedí v šachte žiadne vrzganie, rýchle dodanie, maximálna spokojnosť, prvé naplnenie do polovice a vyprázdniť,odporúčam suché mazivo po pár použitiach aby sa prípadne nečistoty nesasekavali pomedzi bbcka

Compact & light, a lovely rifle for when the mission requires extra discretion and mobility.

One thing though: the ETU will enter "sleep mode" after 60 minutes of inactivity and the gun will need to be power cycled in order to shoot again, so beware if you are into milsim.... I solved this by adding a microswitch to the battery wires and trigger the switch every time I pull the charging handle.

I own a we06 and we have a total of 6 in our team. never had a jammed mag or broken one. Really easy to change the capacity of the magazine as well to slip it to the mag holder. they are sturdy and feels great in the hand . there is no woble in the gun. did test it yet in other pp19 style replica like lct

Works and feeds. Came pre-lubed but havent tried the 30 round option.

I dont believe the lube gets on the BBs though cause I havent noticed anything odd with the hopup.

Seems solid enough for the pricepoint so no complaints from me.

very lightweight, the mosfet is something special, some very fast and unique ROF, drawback of this is that you lose joule/fps compared to the standard version. range and speed is perfect for cqb but outdoor its a more mehh option. good sidearm or if you want to move up really fast.

only misleading thing is that in the description it states 300fps and recommended ammo is .23 or .25, but the 300fps is only gained with the .20 ammo.

I just started playing airsoft and was interested in a lightweight SMG and saw this.

I played my first game with it and absolutely loved the feeling of it. Very easy to handle in close combats but also on longer distances. Even the people that has alot more experience than me was very impressed with the feeling of both the motor and the body of the replica.

+Very sturdy body even without the full metal version!
+easy programmable MOSFET
+cheap high quality replica!

High quality magazine. Looks very simmular to a AK74 mag... but skinnier. The Follower has an extention, so there is only a bb or two that fall out when you remove the mag. Feeds very nicely. To switch the capacity, you need to push out two body pins on the top of the magazine and remove the internals. And then just slide the switch left or right.. Also, the mag is a bit wobbly inside the replica.

Great out of the box replica, snappy and amazing rate of fire 26/27 bbs whit a 11.1 20C, the power is 0.92J whit 0.25g bb the only trowback are the magazin, the feed no problem but are only 80bb

The replica is amazing for its price.
It performs great, the trigger is very sensitive and its fairly accurate.
For being all made out of polymer it feels very sturdy and it has zero wobble, its also light enough to be used one-handed.
The battery space is enough to fit even bigger stick lipos even if a little tightly so i would still recommend the slim ones.
The only minor defect is that the stock when folded covers part of the trigger, making it a little harder to shoot with full finger gloves but its not very troubling,

La replica è molto ben fatta, se volete vedere la recensione completa in italiano al seguente link: https://youtu.be/9VzRXoFlI7w?si=t4MMrfW6k5xcDaYl
Tutto il resto nel dettaglio lo trovate nella recensione

this smg is a beast it has progamable mosfet a pretty good hop up (even tho its made from plastic and sadly it is propretary) the barrell is really good and its a dsg wich makes the gun shoots really fast like 27-30 bbps i would love to give this gun 5 star but there some things that really upsets me sometimes the gun just shutdown and from i have seen online its not a single case but practically everyone has this problem but its not like the gun stops working completely or something you just have to replug the battery but still its really bad if the gun shuts down midfight the second downsides is that the mag are really small in capacity and with that rate of fire it will take max 3 second to dump a fully loaded mag the final thing which isnt really that bad is that there isnt a sling attachments or at least i havent been to find it yet tho this gun is really good for the price and i think its worth it but i would wait for a revision or a recall or something so they fix the problem with the mosfets or if you want you can just get a different mosfet like a gate aster gate titan or a perun hybrid wich all of them will be an upgrade from the stock mosfet

Ho preso questo caricatore x il Wellpro 06 (4 pezzi). Sono solidi e precisi. Utile la possibilità di variare il numero dei BB. Lasciato cadere volontariamente per terra durante un cambio rapido non ha riportato segni o ammaccature. Ottimi i tempi di consegna. Benissimo Taiwangun.

Out of the box you receive a sturdy Nylon Polymer PPK-20. Super solid replica no wobble at all until you get to the mag but, after you slap so duck tape in the magwell it all goes away. Extremely light replica very snappy trigger response no over heating issues with the battery or motor. Feeds every bb to perfection I’ve recommended this replica to 4 other buddies and they can’t wait to get there hands on it.

Polymer is good quality, doesn't wobble at all. Replica was shimmed pretty well from The box and only had to tighten the motor. Semi IS very snappy for a stock gun and rof is great. Overall I am very satisfied with my purchase.

Nice and torquey stock motor. Running it with a 9.9 LiFe and getting more RPS than I will ever need. The binary setting for the trigger is a monster - very useful. Feels solid, no creaking. Very solid stock. Great balance, too. Easily manoeuvre with one hand if needed even with a red dot attached. Sounds very smooth like it has a factory shim job. Amazing accuracy for such a small package.