[Ensemble] CM.041B BLUE Edition [CYMA] + Garde main MLOCK pour MP5 [CYMA] + Montage extension rail [CYMA]

Bon produit, s'adapte parfaitement à mon MP5 de chez G&G. Permet de rajouter un point rouge et de changer l'aspect de la réplique. Look plus sympa et qui permet de de le moderniser un peu plus.
Satisfait de mon achat

Bon produit, de qualité. Acheté pour remplacer le garde main d'un MP5 g&g. Quelques ajustements à faire et pas beaucoup de place pour la batterie, mais ça donne un look sympa et plus moderne.
Dans l'ensemble je suis satisfait

Très satisfait.
Réplique commandé avec un ETU Kestrel installé, fonctionne parfaitement. Attention à la consommation électrique, les batteries se vident vite en jeu.
Réplique solide, léger jeu au niveau du garde main.
Pas de problème de place pour la batterie (dans la crosse.
A noter que les chargeurs droits ("old school") fonctionnent parfaitement.

Agréablement surpris de la qualité de la replique, aucun problème, le hop up tiens et fait le travail, 0.25 touche à 40/45m en restant en dessous d'un joule.
La bete fait son poid, mais est robuste,
A voir sur le long termes.

La réplique est plutôt lourde, mais elle est bien finie, la batterie est stockée dans la crosse, quand je cours il y a un peu de jeux et ducoup un bruit de la batterie qui tapote contre la crosse. Il y a une bonne prise en mains. La seul chose à redire cest que pour changer la crosse et en mettre une réglable voir aucune ,il faudrait prendre en compte que ladite batterie serait à l'air libre.
Je conseil tout de même.

Garde main acheté pour une mp5 Cyma,
Il est très très bien fini pour le prix, ça a l’air relativement solide.
La vis est fournie avec. En revanche le packaging est très léger, arrivé limite ouvert
Un bout de carton et un morceau de papier bulles, mais heureusement arrivé en excellent état !

Une très bonne réplique ! Pour le prix, rien a dire, de bonnes finitions, agréable au niveau de la prise en main, et fournie avec une batterie et les accessoires qui vont avec !!
En interne, les pièces sont très bien finies et ont l’air solides dans le temps ( avec un ressort 330/350 fps je pense que la replique durera p’us longtemps encore )
Réactivité correcte.

Super rail !! Très belle esthétique !! Idéal pour un MP5 SD !! Il permet de pouvoir mettre une lampe ou un laser grâce au fixations M-LOK sur l'avant du rail. Se fixe parfaitement sur mon MP5 Bolt !! Merci Taiwangun pour ce super article !!

Bien pour une cmo41j look sympa mais faites attention à la taille de vos batteries qui peuvent ne pas passer dans ce garde main assez étroit !

une merveille, une très bonne solution pour accessoirisé une MP5 SD ! les port M-lock permette l'ajout de rail facilement, il donne un look plus moderne a la réplique !

Un achat déjà repris pars un ami !

Foncé sans réfléchir

Pièce très bien finit par contre ne s’adapte pas sur le GSG 522 ICS.
La pièce est trop courte de 15mm mais ça peut s’arranger en bricolant une patte de fixation.
Sinon reçu pile dans les délais indiqués le colis était très bien emballé.
Les rails M-lock sont bien ajustés j’ai pu monter une poignée et une lampe il n’y a aucun jeu.
Donne un look beaucoup plus agressif à la réplique permet le montage d’accessoires (ce qui n’était pas possible avant) et un peu plus de poids à l’avant ce que je trouve beaucoup plus agréable.
Attention néanmoins une fois ce garde main monté vous ne pourrez plus y loger une batterie ou alors une très très fine.

Superbe garde-main métal! Belle finition noire, le système M-LOCK est vraiment appréciable mais attention, non compatible avec les modèles SD, même CYMA.
C'est dommage car le rendu est beaucoup plus moderne que les versions d'origine!

Deze rail is zeer goed, mits wat aanpassingen past deze perfect op mijn g&g mp5, heeft ook een mooie afwerking, en is ook zeer stevig, ik zou het iedereen aanraden om deze te kopen als je u mp5 een ander uiterlijk wil geven

Very good replica for its price, most parts are metalt it shoots a little bit too powerful so I have to replace the standard spring. It comes with a battery included not a lipo but it works great.
Can’t wait to take it to my next skirm. And see what it does in the field.

Solid build quality, no creeks no wobble, good performance out of the box, for CQB this one is a good choice. My inner barell is a bit off to the outer barell so i need to shim that so i can fit a longer tracer unit if i want to so it wont strike the end of the tracer. But mostly will use th stock length for cqb. Would recommend it.

I was looking to mount a flashlight to the top of my CYMA MP5SD, and this fulfilled that purpose perfectly. It did bulk up the profile of my MP5 a little more, but that's completely overshadowed by the utility this top rail provides, which brings a touch of modernity to a classic gun.

La CM.041B è una bella arma. Piccola precisa e con cum bel peso. Rifinita molto bene del dettaglio. Consiglio le 0.28/0,3 bbs con una batteria da 11.1V LIPo dato che la batteria con la quale arriva è molto debole. Anche del caricatore non posso dire di meglio. Consiglio di comprare anche 4 MID maga da 130bbs.

I bought this product from Taiwangun for my WE MP5 (APACHE) after reading on a reddit forum that it might fit.

And indeed after a little modification it can be made to fit!
The build quality is good, nice matte finish on the aluminium.
Would recommend!

Jan

Un ottimo fucile qualita prezzo dove la qualità è mto alta frontale e upper reciver in metallo e lower reciver e calcio in abs
Unica pecca il reil a un minuscolo gioco
Mentre per quanto riguarda taiwangun sempre il top spedizione super veloce e prodotti sempre al top

The handguard construction is really solid, the paint is nicentoo and it gives a really nice modern look to mp5 replicas while allowing to mount any type of flashlights, lasers, grips, or any accessory you would need for an airsoft game

The quality of this toy is good!
it definitely has a nice feeling while in your hands
with the metallic frame and nice weight.
The functions are ok with the trigger being a little hard and slow.
The hopup is not what I would consider a good hopup system and most of the time it even goes to 0 on its own after a couple of shots.
Feeding problems occur every now and then

This extened rail fit perfectly on my CYMA MP5 SD6. No issues with fitting or rail size.

The MLOK section holds my flashlight perfectly and as the rail is slightly raised, creates a nice space for the pressure switch.

If I ever need to purchase another MP5, this will be in my basket as well!

A very nice upgrade for a classic design. Something about the extra length running to the front sight post just make the overall look of an mp5 seem complete. Install is easy enough. The only tricky part is the grub screw to the front sight post. But once its installed and everything is tighten down the whole mount is rock solid. Its also extremely light weight as well. I was shocked once I held it in hand only weighting a few onces all together.

Somebody said in the review it’s compatible with the WE APACHE MP5, so I bought it. He is a liar. It’s not fit. The screws are low quality, the paint is looks great. The whole thing is very lightweight.

It is actually surprisingly light. Fits the mlock mp5 foregrip perfectly.
I put it on a cyma cm041j and it fits well. When I put force on the grip I can almost feel a little play, but it's not rattling or clicking or feeling free in any way.

The part itself is good quality and feels/looks nice. However be aware that some models of the mp5 have a shorter receiver (im not talking about the mp5k). My classic army has this shorter receiver and the rail does not fit. There is an adapter for this that comes included in the plastic RIS handguard from cyma. This looks like it fills the gap between the rail and reciever.

For reference, the short mp5 reciever stops where the front radius of the magwell ends. The longer reciever extends a good 3-4cm beyond this.

This is an excellent airsoft gun if your looking for something that will feel solid right out of the box. The weight is just right that it doesn't feel like a toy but not going to wear you out. The full stock is nice since it provides excellent battery space, the ability to shorten the gun isn't much of issue for me. The pic rails already having covers and grip is a nice touch, not having to get attachments right out the gate.
The internals are great, switches are snappy and responsive. feed is great and shoots straight with proper BBs and hopup. Quick change spring makes it easy to adjust it for outdoor or CQB fields.
If you're looking for a great AEG SMG, this would be my top pick, only things its missing is a pic rail for an red dot, but those can be ordered for 15 bucks.

Essential for any mp5 purchase IMO, lets you mount modern optics to these Cold War era beauties! Not the easiest to install, but solid as a rock once it's done. Only compatible with full size MP5s, you'll need a different one for the diminutive MP5k!

Nice CYMA MP5! I can confidently say this gun has a nice feel to it when you shoot. Down below I made a list of the pro and cons:

Pros:
-Has good heavyweight
-This replica comes with an 8.4v 1200 MAH battery
-The rail dust covers are already installed for you
-The vertical handle grip feels high quality and is made of durable plastic
-Has a nice rate of fire and is loud (I bought the 400 FPS version)
-Very accurate. Therefore, you don't really need to buy a rail and scope
-It is very cool looking! I bought this because it looks like the same exact model as the one in the video game "Call of Duty Modern Warfare 3."
-This MP5 comes with a thread protector and correct style MP5 flash hider (Also, made of high-quality metal
-The charging handle on this model feels like it is made of high-quality metal
-Very snappy trigger response. While shooting this MP5, it almost felt like there was a little bit of recoil
-The stock has a lot of room for many different types of batteries.

Cons:
-This gun does not come with a rail mount for optics. You need to buy it separately
-The selector switch is not consistent and skips firing modes. For example, When I try to go semi-auto, it skips right to full auto.
-As mentioned before, the stock has a lot of room. This means that you can hear your batteries rattle around when you move. However, an easy fix for this is to just put foam cushions.

All in all, I would say this the Pros outweigh the Cons. If you are thinking about buying this, look no further. You won't be disappointed with this purchase. Lastly, I highly recommend getting mid-caps for this gun. The ones with the dummy bullets round work great. :)

Raíl M-lock para MP5
Perfecto para colocar en cualquier MP5 yo se lo he puesto al de Marui y ha quedado muy chulo y diferente. Entiendo que Valdrá para más marcas. Recomendado 100% tiene tornillos para que no se pliegue en la parte delantera donde va el punto de mira, no quitar

This mlok rail is perfect for my cyma mp5, and it does fit my WE gbb mp5 aswell. The mlok is great, none of my mlok attachment wobble or anything. Easy to remove and attach. I cant vouch for the batteryspace cause I have my battery in the stock, but you could definitelly fit a 1000mah 7,4 with a little squeeze.

Good manufacture and painting , but too short for fitting in a ICS MP5a4 , no other to tell . Strangely , MP5 of the various producer , usually are perfect Marui clones in external parts.........

Great AEG. I got it with a midcap and had TG do a reshim. Ordered to the US and it shipped to UPS the next day. Took about a week and a half to arrive.
TG said it was shooting around 330fps.

Build quality is great. Theres no wobble anywhere and I've slapped the charging handle 100 times already and it hasn't broken.

-Hops .25s perfectly and i can hit a paper size target at 60 feet easily.

-Tons of battery space in the stock. So much that I needed to put a piece of foam from the packaging in the stock to stop the batteries from making too much noise.

-Hi cap mag that came in the box feeds well but not as well as the midcap.

-Selector can feel a bit weird at times.

-Personally I'm not a fan of the handguard but if you are it totally works.