[Ensemble] AT-PP19-1 Mosfet Enhanced [Arcturus] + Viseur airsoft 1p87 Russe Pour AK/AK12/AKSU [JJ Airsoft]

Rapport qualité prix imbattable donc note conséquente, malgré les quelques petits défauts d'origine.

Défauts :
- Double feeds aléatoires, ne survient pas pour chaque chargeur tiré mais cela reste gênant lorsque cela apparaît
- Le circlip de maintient de la molette hop-up au dessus de celle-ci a tendance à sauter si l'on joue trop avec la molette de réglage, possibilité de le coller avec epoxy

Qualités :
- Externe de grande qualité full acier et polymère très robuste, alliant compacité et légèreté
- Interne robuste et optimisé d'origine, rien à modifier pour jouer, réactivité optimale avec batterie 11,1v
- Chargeurs solides, légers, compacts et ajustables 30/90 billes
- Détente à micro switch réaliste, ni trop dure ni trop molle
- Prix attractif sur taiwangun.com par rapport au prix moyen trouvé sur le marché

Coutent du viseur, belle reproduction, il fonctionne bien, le joint de la molette de réglage est bien huilé, la molette tourne bien, l'intensité du réticule est également très bonne, les réglages hauteur/dérive correctes, enfin un viseur JJ Airsoft convenable.
((Très déçu par la reproduction du viseur 1X20 1P76, la qualité des lentilles est très médiocre, et le montage de mauvaise qualité avec du jeu sur un rail GHK))

Bonne fabrication générale, ça semble costaud.
Quelques bémols toutefois, la molette de réglage d’intensité gratte et a un peu de jeu, peut-être est-ce mon modèle. Autre chose, le réticule ne représente pas celui de l’original et n’est pas super net.
C’est pour ces raisons que j’ai enlevé une étoile, il aurait eu 5 étoiles si le prix était 20/30 euros moins cher.

Robuste et fidèle au design de l'original. Ravira les russophiles.
Les différents mode d'éclairage sont parfaits pour s'adapter à la luminosité ambiante.
Un petit moins pour me mode de fixation rapide a un seul point qui manque de stabilité.

Envoie soigné et rapide.
Produit qualitatif et très jolie.
Matériaux de bonne facture, solide.
Reproduction de type russe très appréciable pour un prix raisonnable, la seule à ma connaissance.
Parfait pour compléter et accessoiriser ses répliques d'AK.

Très bonne réplique Arturus du Vityaz. Full acier, bon matériaux. Les ajustements sont très bons. Attention si vous voulez l’équiper « Zenitco » 5ku, il faut bequcoup de modifications et ajustements.
——
Very good Arturus replica of the Vityaz. Full steel, good materials. The adjustments are very good. Be careful if you want to equip it with “Zenitco” 5ku, you will need a lot of modifications and adjustments.
——
Bardzo dobra replika Arturusa Witiaza. Pełna stal, dobre materiały. Korekty są bardzo dobre. Bądź ostrożny, jeśli chcesz wyposażyć go w „Zenitco” 5ku, będziesz potrzebować wielu modyfikacji i dostosowań.

Une réplique du feu de dieu, compacte, solide et à la fois pas trop lourde. Super réactivité du bon voir très bon matériel du Russe quoi!
Un très bon rapport qualité prix le changement de ressort est super pratique pour moduler selon les différant terrains ( libre, cqb ou autres)


A replica of the fire of god, compact, solid and at the same time not too heavy. Super responsiveness of the good see very good material of the Russian what!
A very good value for money spring change is super convenient to modulate according to the different terrains (free, cqb or others)

Réplique structurellement décente mais problématique, l'adaptateur de crosse n'accepte presque aucune pièces, chargeurs non compatibles LCT, La peinture s'écaille très facilement, Le top cover se coince et ne dispose pas de beaucoup de place, quand à l'interne j'ai recu un lemon qui double/triple feed en semi autant qu'en full, au moins un tir sur deux. Je ne ferai pas confiance à la fiabilité des internes sur le long terme avec une Lipo 11V

La réplique est super fiable, aucun jeux, tout est bien calé, sens la robustesse et la fiabilité, j’ai une portée de 50m à la 0,25 avec une batterie lipo 7.4, attention il faut vraiment une batterie très fine, celles conseillées passe difficilement

Superbe réplique, belles finitions, robuste, avec de bonne performances en sortie de boîte! Après plusieurs mois d’attente je ne suis pas déçu! Le seul petit défaut c’est l’adaptabilité des pièces externes de custom, les pièces lct ou 5ku (crosse et garde main) devront être réadaptées pour aller sur cette réplique. Il faudra être assez bricoleur et avoir un peu d’outillage pour réussir l’installation.Merci taiwangun

The pp-19 Is really well made and has a lot of very cool features.
Be aware that contrary to other arcturus replicas, this one is painted black. There is no play in the handguard but a small one in the stock.
Finally, it has good reactivity BUT in typical arcturus fashion, the barrel was AGAIN rusty and hop rubber was quite bad. It's sad because the new hop unit is amazing... Buy a barrel and rubber at the same time!

Great red dot very expensive but ive managed to build with it an 540€ gear for start and it fell like 4 times in my room and there wasnt even 1 scratch realistic also looks great with an ak12 (ive got an we09) and i love it

Impossible to mount on both LCT and Arcturus rail. Looks like the tail is to thick. The sight leans to the right and isn't angled. However fits like a glove on a ICS M4. Big disappointment since I can't use it on my AK12. Other then that looks like good quality

Ottimo prodotto, simile all'originale, tutto in alluminio. La croce led è molto visibile e soprattutto la possibilità di usare una semplice batteria AAA lo rende economico e flessibile anche direttamente in campo, durante il suo utilizzo

Nice looking red dot , fits great on my Cyma platinum AK . A little bit big , but not so heavy . I was a little bit worried about that .
I liked It also bicause it uses a standard AA battery that you can find almost anywhere. The dot is actually composed of 4 paralel lines which make a nice aiming crosshair . You can also adjust different intensity , so that is nice , but only red color

Things are ok with this red dot.
I have a complete Zenit AKM and this red dot completes it.

The zeroing mechanism works as it should be.
It even holds 7.62x39mm; tested it out on civilian AK.

Thanks for the service!

The packaging was really nice, also included stickers, fridge magnet a coaster and a flare magwell that you can screw on for easier reloads. The thing is built mostly from steel feels solid no wobble yet. Fire rate is awesome with 11v lipo and has a punch with 380fps. Hops .28 bb no problem decent range of 60 meters. About batteries theres not much space 1100mah fits. I bought it way below average price so it worth it 200% would recommend.

I recently purchased two AT-PP19-1 MOSFET ENHANCED rifles from Arcturus, and unfortunately, my experience was very disappointing.

First of all, the packaging was extremely poor. Both boxes were crushed under the weight of other items and BB bags, and everything inside was just thrown together with no protection whatsoever. Because of this, one of the rifles arrived heavily worn, with multiple scratches and a fire selector that already looked used. The other rifle had a bent charging handle (the one used to access the hop-up), which was stuck and very hard to open due to the damaged box.

The overall quality control from the factory seems either very low or completely absent. Most of the screws were loose right out of the box, the motor doesn’t feel like a true high-speed motor as advertised, and on one of the rifles the motor wasn’t even engaging the gearbox at all because the height adjustment screw was completely loose, leaving the motor sitting too low and spinning freely.

On the positive side, the rifle does have decent accuracy, the externals feel solid, and the gun is not too heavy while shooting with good power. However, I had to spend an entire day fixing all the issues just to make the rifles usable, which was very frustrating—especially since I ordered two, one for myself and one for a friend.

In the end, I’m very disappointed with this experience. For someone without technical knowledge, this would be an absolute nightmare and a very bad first impression of the brand. The only reason I didn’t return them was because I’m ordering from another country and didn’t want to complicate things even further.

This sight is an absolute banger it has 12 settings for brightness during the day and 3 mods during the night it looks and feels very realistic. If you are looking for a good sight definetly buy this one

Works well in direct and indirect fire shatters morale of the enemies quite fast. It is high quality. I bought it with 2 extra granades tho it requires maintainance. For the interior use silicone spray as otherwhise it may start to leak.

worked as it should and has a great choosing of light levels.
it was very easy to mount it to my ak-12 and fits nicely.
the only gripe I have is that no retailer makes protection for this sight so you'll have to make your own.

I've been looking for an AK that I like, and now I finally found it.
Excellent replica, works well out of the box.
Full steel, except for the outer barrel, pleasant weight, the polymer is nicely finished
I removed the 9mm mag well so I can use 5.45 magazines, PP 74SU...LOL Taiwangan 10*

I am in love with this replica! Both polimer and metal parts look and feel sturdy. No wobble on any of the parts! Light and compact with excelent performance out of the box! If you are going for a RUSFOR kit, get this replica, you will not regret it!

Easily on of the best sights I used. It has a very sleek and robust design and it feels very sturdy. The reticle is a very nice one that is miles better than a simple dot and makes targeting anything a fair bit easier on the eyes. Even the reflections are kept at a minimum and can be used even in rather bright environments with no issues unlike other sights I have.

The 1P87 sight is an absolute standout in terms of durability and apperance. My friend's optic, mounted on a rifle, actually fell straight onto this sight while leaning it against a car and the only result was a small dent on the external housing.
One of the standout features is the night mode (N1, N2, N3). It’s perfect for night games, as it preserves your natural night vision far better than other optics I’ve used. This is actually the first holographic sight I’ve owned that includes this feature, and it makes a big difference during low-light operations.
I hven't noticed major parallax error while using it on field. Quick target acquisition from various angles works flawlessly.
Another huge plus is that it runs on a standard AA battery. That’s a small but practical detail that makes field use easier and more convenient.
All in all, it’s an impressive piece of kit. Now, I just hope that one day JJ Airsoft brings out a 1P78 replica too.
In my opinion, it’s a must-have for anyone building a modern Russian loadout.

The 1P87 sight is an absolute standout in terms of durability and apperance. My friend's optic, mounted on a rifle, actually fell straight onto this sight while leaning it against a car and the only result was a small dent on the external housing.
One of the standout features is the night mode (N1, N2, N3). It’s perfect for night games, as it preserves your natural night vision far better than other optics I’ve used. This is actually the first holographic sight I’ve owned that includes this feature, and it makes a big difference during low-light operations.
I hven't noticed major parallax error while using it on field. Quick target acquisition from various angles works flawlessly.
Another huge plus is that it runs on a standard AA battery. That’s a small but practical detail that makes field use easier and more convenient.
All in all, it’s an impressive piece of kit. Now, I just hope that one day JJ Airsoft brings out a 1P78 replica too.
In my opinion, it’s a must-have for anyone building a modern Russian loadout.

The gun is great, it shoots good, it handles great, and the construction is mostly solid. But there are a couple issues with at least my replica.
Once I received it and test fired it, BBs kept exploding when leaving the barrel. This went away and hasnt appeared since.
But recently, the latch holding the stock in place has been bending out of the way and allows the stock to be closed by using the slightest bit of force.
Its a great replica, but it has some issues.

Very well built red dot, it seems it was made in alluminium.
The regulation is easy but you need a tool( which is in the box)
12 levels of intensity for the day
3 levels of intensity for the night
The selector wheel clicks smoothly but it's a bit loose ( nothing to worry about it)
Super easy to mount and dismount.
The only downside is that there is not a suitable protection for the lens so you have to be a little creative with the plexiglass

the best I have bought in replica. its price for its quality is too low. first of all, it is a very strong weapon and you understand this as soon as you hold it. the metal parts are much better even than a 400-500 euro gun. even the polymer parts of the weapon are of excellent quality. from the first shot with 11.1 batteries (I haven't tried with 7.1) it is very accurate and powerful despite the factory internal parts that I think there is no reason to change because even these are of high quality!!! end very good mosfet. the best that someone can buy at a low price and not waste their money.

Solid gun with minor problems.

External Build Quality:
+ Sturdy overall construction with minimal wobble
+ Good folding stock with minimal play for an AK platform folder
+ Good finish quality
+ Appropriately stiff fire selector
- Rear sight doesn't lock in position
- Slight pistol grip play due to half-cage design (can be replaced)
-+ Plastic mag shaft (visually indistinguishable)

Internal Performance:
+ Impressive stock trigger response
+ Excellent consistency (under 1m/s deviation)
+ Good rotary hop-up system
+ Practical decocker feature
- Some shimming issues
- Stock motor may struggle with stronger springs
-+ Slightly mushy trigger pre-travel, though crisp at activation point

Value Proposition:
+ Excellent value at sale price (212€)
- Less competitive at full price (300€)

Pros:
- Solid external build quality
- Reliable performance out of the box
- Good consistency
- Minimal wobble in crucial parts
- Great value when on sale

Cons:
- Non-locking rear sight
- Minor shimming issues
- Mushy trigger pre-travel
- Half-cage design limits stability

The AT-PP19-1 Mosfet Enhanced [Arcturus] was received as per specification. The quality of the product is very good, and it looks very realistic. Delivery was completed on time, having in mind increase of shipments in this time of the year (Black Friday). I would recommend this replica to my friends definitely.

The 1P87 of holosight is a very beautiful and easy-to-use reproduction, it can be finely and quickly adjusted, and the brightness has many levels (and with nightvision).
Only the inscriptions are thicker than on the sharp version, as well as a figure is missing, otherwise I can only recommend it

Acrturus AT-PP19-1 is worth the money (212 EUR); I use a 1.5J Arcturus in the forest and I wanted to use an Arcturus VYteaz in the CQB as well: very well made, very well in the hand, does not play, does not trick, very good feeling and well tied. I like it. Very easy to turn left-right, I like to play with the bed tight. Maybe it was better to have bought the model with optical trigger PPK20; AT-PP19-1 seems to have too long trigger stroke and I had the feeling of "it should have already fired". I recommend in the current price 212 Eur.

It's an amazing optic if you are a Russian forces enthusiast. The reticle is the same as the original one.

It has 12 levels of brightness and 3 levels that are pretty dim for nighttime. And best of all, it uses 1 AA battery, so you don't have to buy a very specific battery for it.

Great sight, allot bigger than I thought it would be. Got it for my LCT akmsu but was waaay to big. Ended up putting it on another rifle.
Build quality is really good, and the dot is very nice.
Would recommend this sight to anyone looking for a Russian style sight.

Upon unboxing, I was pretty pleased with this optic. My only gripe was that there was a second reticle that appeared at the top of the window at higher brightness levels. Unfortunately, my device also ended up having the power knob get stuck. I was able to turn it off, but needed to break out the channel locks to get it done. I hate to have to leave a less than positive review, but that power knob is a real let down.

It's a definitely a great 1p87 replica and the military reticle is fantastic, but I've stumbled upon the same problem as the other person mentioned - the brightness control knob has stuck in one position (in my case it's 6) and couldn't be turned in whichever direction.

I love everything about this optic, except...

it broke on the day i got it. The on-off/brightness dial got stuck and is permanently locked on the NV1 setting. I have tried turning it so hard i got blisters on my fingers.

Haven't seen many reviews or posts about this optic, so i hope there is an easy fix.

Arcturus AT-PP19-1 ME
I bought it having big expectations from Arcturus but I'm not impressed at all.
First of all, I couldn’t use it in the first instance because of constantly double feed and shooting to the right. I wanted to send it back to Poland but it was an expensive and time consuming process so I fixed it. The problem was some burrs in the hop-up chamber around the 2.5mm hole where the bb is kept. I read many complaints about this problem which seems to be an usual issue for Arcturus products. Big shame for Arcturus which is unable to train the quality inspectors to do a proper job for such a long time. The motor is the laziest motor I have ever seen. I replaced it with a decent one. The stock was wobbling when folded, I removed it anyway. The micro switch is clicking like a table lamp switch, you will feel that in the trigger. If you decide to open the gearbox it will be pretty difficult to close it because of the bloody cut off lever and the micro switch which doesn't want to stay in place. The internals are ok, similar quality as Cyma blue. The upper part of the handguard, where the gas tube is located, has sharp edges which I had to file. The receiver/ battery cover is ok, well fitted, you can place a dot on it with confidence.
In my opinion, based on my personal experience and the reviews I read, if you decide to buy an Arcturus gun it is very likely you will need to fix it before using it.

Replica is really good made one .
Externals and polish is nice looking one .
Mosfet and motor is beast bcs you have high rate of fire.
Gun itself is small and good to cqb ,lipo 11,1 have no problem to fit and it also have rotary hop up and dean-t conector and +is piston button to let piston and spring in rest position.
Only my minus was the stock . Stock is little wobling but not so much truble to fix it with some tape . Other external feel nice not any movement and much stickers from arcturus you got with the gun.

Extremely well built replica - everything is steel, apart from the barrel and stock latch button. Awesome trigger and trigger response, but RoF is a little lower than expected with 11.1v LiPo.
Overall very satisfied with my purchase

Amazing little thing
works grate the ROF is amazing and so is the build quality truly amazing..The unboxing was extremely satisfying Cant wait to field test it soon. Overall a well rounded SMG grate performance out of the box

Great SMG overall I am happy with it. I played quite few games with it by now. Really good at CQB and light to carry for long durantions.

Reason for 4 starts:
Gun came to me in none working order, the rotary hopup came lose due to a charging hande rod geting bend and causing rotary wheel to fly off as it is fixed with only a C-Clip, that taken me a day to find it in the box. After that it was good.

Sometimes when in signle fire mode it will jam and not fire due to I presume the reverse latch. It is fixed by selecting fire selector back and forward. Still enoying during a fire fight.

Good gun for a price :).

I ordered this amazing replica just a couple weeks ago, in this short experience I had with it, I can tell you that this replica has an incredible 22≈ round per second capacity with an 11.1 lipo, the build quality is really good, my replica came with no stock wobble whatsoever, the magazine fits perfectly and works like a charm, the 6.01 precision Barrell grants you with very good accuracy, despite being a bit front heavy, due the nature of this replica, it shouldn't matter to most people, said that, if you play on lesser than 300 fps (or 1joule) you should play with a 7.4 battery, which gets you a realistic 12 rps capability in full auto without making your trigger response slower, due to the integrated Mosfet.
If you're considering in picking up this replica, I'd say to go for it, it has a great value for it's price and frankly, it's a very unique replica that will set you aside from the myriad of m4s out there.
Lastly, if you are picking this amazing replica, I highly suggest on grabbing a couple spare mags that can be safely housed in mp5 pouches, I personally bought the ones from 8field and they fit perfectly.
Said that, hope y'all will find this one to be your perfect replica, but regardless, have a nice one :)

So I got this really awesome looking replica a few weeks ago after it had been flagged by customs ><.

The externals are near flawless, its "heavy" and rugged, no wobble in the handguard, stock had a bit of wobble but it was easily fixable by applying a bit of electricians tape.

My replica had a bit of an fps variance, so I opened it up. From the factory the sector gear had been short stroked by two teeth (otherwise the piston will slam into the back of the gearbox and it wont fire), but it was done rather poorly so I had to rectify that. Shimming was perfect, as in perfect!

Airseal was perfect, only thing was that the poor shortstroke job had left some edges on the gear that caught on the tappet plate and damaged it, which I'm sure is the cause of the fps variance.

I think I have a spare tappet plate somewhere, so I'll change that and have an awesome and unique replica.

The magwell adapter that comes with it, is flimsy, it comes with two grubscrews but there's no indentations or holes for them to connect the magwell adapter to the magwell, so its going to fall off at some point.

If you're not tech savy and you get a replica like mine, don't do what I did, just contact the techs at Taiwangun, they'll sort you guys out :)

AT-PP19-1 Mosfet Enhanced [Arcturus] is a perfect gun for its style, it has a very pleasant trigger that feels awesome. No loose parts, with is awesome, specially the stock, it has no loose movements at all and that feels great. The sound is pleasant as well. The fire selector is too tight, it needs some time to get softer, but works fine. Stock mag is very good, just put the bbs and shoot with no troubles Small, compact, beautiful, perfect for cqb.

Really like the replica, shoots very well out of the box, i opted on the medium fps downgrade, shoots now 340-345 fps. Only "negative" thing about the replica, it's a bit front heavy but tis is solvable with another stock.

The replica arrived in 3 days. Super quality and very satisfied. This is my 2nd replica from Taiwan gun and it will definitely be not the last! I took the replica to a skirm last weekend en I liked it as from the first minute.

This is a really good replica. I'm an AK lover so I cannot haven't in my collection. Great balance between weight and stiffness. The aluminium is the perfect material. The details of the replica are well made.
Talking about the functioning the integrated mofset works quite good. It is not the best but it does its work. I use a 7.4V battery because I'm a cautious one and I don't want to reduce the probability of problems to be the lowest as possible, but I think this replica can be used with 11.1V as well right out of the box.
The mags work perfectly. They catch every single bb.
Now I've to talk about the problems I've came across. The little lever which holds in position the upper part of the handguard does not stay in place, so I've had to put a shim to hold it in place. Another problem, as you know the AK- style AEG have the shutter lever on the right side of the weapon. In the box the AEG is laid on the right side so the entire weight of the weapon is put on this piece and so the rail where the shutter lever slides has been bended a bit. This hinders the access to the hop-up. I've disassembled the AEG took out the rail and bended in the right shape. This problem is a problem of the box and the way how the replica is put in the box not of the replica itself.
The stock wobbles a bit.
These are issues that I've shouldn't expected from a 250€ AEG.
I've given 3 ⭐ just for these external problems.
In conclusion, do I recommend it? Yes is a beautiful and well working AEG but expect some external problems.

Nice one, no wobble, great weight. Dont use magwell because its very ugly... great russian submachine replica. Trigger microswitch is little bit tough, so its little bit harder to shoot quick and accurate on semi mode

First off, excellent build quality, most of the metal parts are steel, the stock is rock solid, furniture sits very tight, it's just the pistol grip that sits a tiny bit loose even after tightening the motercage and grip screw.

My gun came not being able to fire a single bb, turns out the stock nub and rubber was either too weak or didn't sit correctly, i replaced the tensioner and rubber with maple leaf parts, and now it works flawlessly, it hops .32's no problem.

A few highlights of the gun:
*Contact trigger, you can feel the "wall" when squeesing the trigger, you get a positive *Click* sound with firering, happens both on semi and full auto. not a hair trigger, but i like it compared to E&L or Cyma triggers.

*as many other arcturus products, this gun also have a anti reversal latch button, so your spring don't get weak over time when not in use.

*QSC is very easy to get to compared to most AK's on the market.

*Comes with a good deal of rail space and have a 14mm CCW barrel threading, so you can tacticool it out of the box.

A few negatives on the gun:
*the little nub covering the hex screw on the fire selector got lost the very first game, if you want it to stay on, you might want to glue it.

*if you want to change anything on the hop chamber or the barrel, you have to take more apart compared to other AK's on the market.

*To remove the gearbox, you have to take apart the folding stock botton that contains very small parts.

*battery fitment can be very tight, some users recommend using brick batteries instead of sticks.

All in all, its an innovating gun, but it's not perfect, it might be a chore to work on if you are like me and want to add aftermarket parts, but if you like it with stock parts, it' a good CQB to medium distance gun.

The AT_PP19-1 from Arcturus is one well balanced ,snappy, Airsoft gun. The electronic trigger and Mosfet help to modernize this classic. Its compact size make it easy to maneuver, Outdoor or in CQB. This little gem will be a great addition to your collection. I would advise picking up additional mags. Taiwan Gun has the best prices I've seen anywhere.

Greeting first.

The replica arrived as promised with a 340FPS output.

Pros:
- construction is solid
- performance out of the box is good enough to satisfy veterans , new players will have nothing to complain about
- Gearbox is great and unlike previous models , there is the ability to install MOSFETs

Cons:
-if you're looking to base a custom build on it please consider another replica as it won't be easy installing handguards and stocks.
On the stocks issue in particular, the gearbox has a piece of metal that makes the installation of stocks all together impossible.

- Gearbox is not a V.3 , gears will be the main issue of finding upgrades/replacement's
- Motor cage is more like a G36 than an AK

Verdict:
All in all , a solid piece for anyone either starting or likes the build of the gun as is.
Custom builders will have a hard time digging into it

very nice replica especially for the price , compering it to the LCT counterpart which is 200 euros more expensive .

As for the internal and motor (neo magnets )all of them are very nice and sturdy for a stock gun and the add of a mosfet is more than welcome!

A big plus is the rotary hop up for fine adjustments !

Now regarding Zenitco parts , there's a lot of talking that you cannot fit them that they are not compatible etc.There is not such thing !!!

Of course they are not plug & play , you have to work on them with a file and a dremel A LOT! but they fit and once you fit them they work like a charm .

Review AT-PP19-1-ME from Arcturus
Purpose of purchase: Light CQB main replica

- Out of the box -
The replica is sturdy and easy to disassemble. Careful when opening/closing the upper receiver for the battery compartment in regards to wires.

- Accessories -
There is a limitation on third party upgrades you can use for the exterior due to slight design changes in comparison to other brands. The magazines are sturdy and can switch between 30 and 90 capacity, which is great for specific play-styles.
Picatinny rails allow for a large variety of add-ons for your replica.
I use a "Aluminum russian compact front grip from 5KU".

- Performance -
Battery suggestion: Use a '7.4v 1200Mah LiPo', 11.1v will cause motor issues.
The replica performs great and within the FPS limit you choose upon purchase.

- Overall Statement -
This is a very good replica. It performs and looks great. The hop-up unit requires some maintenance. I recommend this replica if you are looking for a great SMG style AK and do not plan to change it with thirdparty cosmetic parts.

I was unlucky and the one I ordered was a total lemon. The hop-up unit had missing parts which were inside the box and after putting them back together, the replica was barely able to fire 2 shots properly.
I settled for a return with the support team and I sent it back and got it repaired for FREE. It shoots well now with extremely rare double fires. Very accurate and the rate of fire is amazing with a 11.1 LiPo.
It's a great package for its price, but many people had issues with them. It seems that aftermarket handguards work on it, but you definetly can't mount stocks.
Order it from nice people who are willing to handle a bad case :)

Out of the box, the gun is excellent. The micro-switch along with the mosfet give quick response to the trigger and a very high firerate. It shoots pretty far for being stock but I would definitely recommend a new bucking and precision barrel to increase that further.

When buying this, I wasn't aware of just how terrible it is to upgrade with aftermarket externals. No stocks will work on this and getting the pistol grip and handguard off is difficult. That is my only gripe with this weapon, I wish the description specified that the stock uses an unique locking mechanism which makes it incompatible with after-market stocks.

HI i buy it last week precision is perfect for short barrel like that but what bothers me is kind of sluggish in comparisom of my cyma platinum m4 what is crisp and fast on response with same batteries but this pp19 is slower and of a lot you guys know what ratio is on gears ? because like i said is slow and sluggish on response but i take it because is only pp19 what is affordable :) but in future i am going to change the motor for 40k :)

Beautiful replica of the PP19-1

First of all, this replica shoots very nice groupings right out of the box with .25 bb's. I could hit targets at about 45/50 meters distant with good accuracy. Magazines feed with no problems even when I've got a 11.1 volt lipo installed. Speaking of 11.1 volt battery, the fire rate is insane! I measured 24 rounds per second in my chronograph.

The stock hop up rubber will carry .25 bb's at about level 6-7 on the Dial. One thing I had to fix was the c-clip holding the hop up dial, which was very loose! Opening the bolt knocked it off the hop up unit, luckily I was still at home and not on the field or I'm certain I would've lost it.

I thightend the clip with some pliers and it's stuck on good now. I would advice anyone who also got this replica to check if theirs is loose too.

The stock locks on thight and can fold so you can store or carry it in close spaces.

The 11.1 lipo's Taiwan gun suggested for this gun do fit but it's very, very thight! I'm using a 1000 mah 11.1v brick instead so I can close the cover without too much trouble.

All in all a great replica, good (and cheap!) magazines, some small problems with the hop up (which is easily fixed), small space for a battery but the groupings this replica shoots makes this a 4.5 out of 5 for me.