[Ensemble] ST8 NON-BLOWBACK Heavy Weight Gas Pistol [STTi] + Holster Per-Fit compatible 80 modéles de pistolets - Black [Amomax]

Holster Per-Fit compatible 80 modèles de pistolets - Black [Amomax]
ce holster est fantastique, une rétention au top une qualité au top
j'ai acheté ce holster en même temps que la Plateforme cuisse Airsoft - Black [Amomax] et le système est compatible à 100% et agréable au dégainé.

J'ai fait l'achat de ce holster rigide, la livraison était rapide, pour le holster, je suis extrêmement satisfait. Mon CZp09 de chez asg est compatible, il passe de manière très fluide sans résistance. Le holster est lui très facile à mettre et tiens très bien ! J'ai fait 2 parties et ce holster tien très bien le coup. Vraiment très satisfait de ce produit merci encore taiwangun !!!

acheté pour mon 501 Army armement
il est tout à fait compatible, il a un bouton pour pouvoir éjecter le pistolet facilement, et du coup ne pas le perdre
j'ai pu l'adapter d'origine sans support supplémentaires sur ma ceinture tactique
je recommande!!

Très bon holster mon St92 y va très bien et en desserrant les vis de réglage j'y ai même mis mon MK23 sans le silencieux bien entendu et la réplique y est très bien maintenue aucun risque de la perdre vu qu'il faut appuyer sur le petit bouton de déverrouillage pour libéré celle-ci donc RAS

Trés bon rapport qualité prix, à voir dans le temps.
Mais pour l'instant trés satisfait.

La réplique est légère et trés précise, bonne prise en main.
Seul l'extraction de chargeur n'est pas rapide mais se réalise sans problemes.

RAS
Il fait bien le boulot, il a plutôt une bonne tape, le réservoir de gaz tient bien le coup (je dirais 4-5 chargeurs facilement), n'oubliez pas de régler le hop-up en sortie de boîte et vous allez vous amuser :D
Seul petit soucis, si on le charge un peu trop vite toutes les billes s'éjectent et je trouve que le grip de la crosse est pas ouf

Holster beau avec de belles finitions.
Parfait pour mon colt 1911.
Le point fort est que l'on peut l'utiliser pour tout type de réplique de poing.
Il est très facilement réglable.
La réplique est parfaitement maintenue sans risque qu'elle ne tombe.
Je recommande.

Holster de très bonne qualité, ergonomique et confortable, facile d'utilisation, il va parfaitement avec ma réplique de colt 1911.
Il tient très bien à la hanche et reste stable.
La technologie de bouton poussoir pour libérer la réplique est très pratique, une fois dedans la réplique de bouge plus et ne sort pas.
Je recommande ce holster.

Bon au début j'ai eu un peu de mal pour comprendre le fonctionnement du HOLSTER, en même temps c'est mon premier, il a fallu que je cherche un peu.
Je le trouvais trop petit pour mon WE PX001, mais enfin décompte il est au top pour cette réplique.
Il y a une sécurité pour ne pas qu'il tombe lors des partis et on peu courir avec sans soucis.
Il va très bien avec Airsoft Drop Leg Platform de AEROMAX

Price-quality ratio is good. Despite being almost entirely plastic, it is well built.

I couldn't measure 360fps with my Tornado cronograph, but with 340fps is still a great weapon of choice for airsoft beginners or home plinkers. It might be even good for a lowcost sniper sidearm.

It is far from the here advertised 615 g in weight. It is about ~400 g unloaded, but with magazine in, therefore it has a bit too much of a toy gun feeling.

After 1 trigger broke inside, just dont buy it its waste of money

Nagyszeru termek, nagyon kenyelmes, asp xtp-hez hasznalom. Kicsit jatszani kellett az allitgatasaval de kivaloan mukodik! Az elso jatekon ahol hasznaltam mar meg is mutatta hogy mennyire hasznalhato es kenyelmes, raadasul jol is nez ki! A rantas gyors es zokkenomentes, stabilan tart a tok! A szallitassal is minden rendben volt, asszem 3 nap alatt kezhez is kaptam!

Perfect weight and good fire speed.
This is my second one and it performs perfect.
I like that it does not have a blow back (less gas usage).
For my personally is the perfect side arm.
And also is really easy to handle it.

I'm going to try not to be too harsh since it is only a 30 euro gun.

This gun is MUCH lighter than advertised. The specs say it's 600g but in reality it's around 430. Not only that, but the magazine accounts for about 200g of this weight, which means that without the magazine this gun weighs only 200g. This would be fine with a smaller gun, but for a pistol the size of the USP, it feels very udnerweight.

I have a spring Walther PPK that outweighs this gun despiter being about half the size.

I havent had the time to test how it shoots or anything, but a heavier plastic and maybe some weights would have made this gun feel a lot better in the hand.

It also raddles a lot when you shake it since the fake slide catch and some inkown internal part sit rather loose. I'm sure it's worth a few extra bucks to get something better.

I plan on selling this as I've replaced it with a Cybergun Taurus PT 24/7 which has a metal slide and weighs only 50g less than the real thing. I'm sure you could even find another USP for 10-20 more euros and be a lot happier. Don't cheap out. Food for thought.

Nice holster. Adjustable width , works fine with my guns. Only downside is that you can pull gun out if you twist it, however that shouldn't happen naturally during game play. it comes with the belt module which seems to work fine, other accessories are available like molle mount, beltclip and drop leg.

Great gun holster it fits cyma 125(without rail) cyma cm 126 and even novritsch ssp5(tested myself). It fits great on any belt and the pistol sita in right away and irs really good fixated.i can only recommend to buy this especially for cym cm 125 because it is hard to find a good holster for usp replica.

Quality is decent for the price and wonderful if you get it on a sale.

The metal used for the trigger, safety and hammer is not the best, if I recall someone mentioned it being made of zinc, the hammer after very minor use has a dent from the pin it hits, so longevity is in question.

The mag release mechanism is not the best in my opinion, but that is more so to do with the design being based on the USP.

The disassembly of the gun is not that easy to understand with lack of proper documentation, in case you need to know there is a small notch on the left side of the slide, you need to pry it open using a flathead and then push the disassembly lever out and you can just pull the slide forward to take it apart.

it does an excellent job! if you need, a pistol hostel this one is definitely one to concider

Excellent! I was a little worried that it wouldn't be compatible with my penknife, but it works flawlessly. It doesn't even wobble. It will be very good for 1911 replicas, and if the description of the replicas includes this holster as an option, then it will be compatible.

I bought the gun for my brother who was so happy when he got it. Unfortunately had it for just 2 and a half days and the trigger broke off. Was working fine until that. Made my brother quite sad to see the gun go so fast. Spent 70 euros for this pistol with shipping + gas + ammo.

I bought it for my JW4 TTI, and it fits like a glove. It's a great and very durable material; taking out the pistol and putting it back in is very smooth.
I am wearing it on the front of my plate carrier, and it is comfortable.

Bough it for my SSP5 and it fits perfectly, I've tried using it with different pistols and it just works. All you need to do is adjust two screws with an allen key that is included and there you go. Holds the pistol very firmly and there is no chance of it falling out. The only thing that somewhat annoys me is that whenever I holster my pistol it scratches the surface inside the holster and leaves some of that scaped surface on the pistol, but all you have to do is simply wipe it off.

Kupilem ten holster do SSP5 od Novritscha i pasuje bez problemow. Wyprobowalem tez go z innymi pistoletami no i tak jak w opisie, pasuje praktycznie do wszystkiego. Jedyna rzecz, ktora jest czasami irytujaca, to to, ze gdy chowamy pistolet do ladownicy moze on zdzierac troszeczke materialu od srodka. Jest to co prawda minimalne zdzieranie ale moze dostac sie to do lufy. Poza tym mega polecam, bo po co kupowac milion ladownic na pistolety skoro mozna kupic jeden, ktory bedzie pasowac to prawie wszystkiego.

The `XTP XTREME TRAINING PISTOL` fits this holster perfectly. This is probably the best holster out there. Note, you'll need a molle adapter if are going to attach it to molle equipment - vest, belt, etc.

this is a good gun it has decent power for a very good price, the only issue i had is one side of the mag relase broke but that is all. The magazines are a little too expensive tho. It is a good gun what is worth buying in my opinion

nagyon jó minőség , jó ár érték arány . r32höz kíválló
very good quality, good value for money. R32 Exceptional

Excelent items, verry nice and quality and fast delivery. Taiwangun it is the besst!!!!!!!!!!!!!

Great quality! Feels sturdy!
+ Highly adjustable
+ Fits (probably) ANY side-arm (within reason)
- May damage the paintjob on the side(s) of the slide of your sidearm, BEWARE
Especially GLOCK-type pistols may experience damage to the paint on the corners of the slide when holstering and unhostering the weapon multiple times.
This may be fixed with electrical tape or foam, but beware!
Overall great product and good quality for the price!

I bought it for Army Armanent R 604. It fits perfectly, The lock does not allow them to fall out, but the button is easy to use. It fits you very well and you can hardly take it off. It can also be easily fitted into trousers. The holder can be rotated so it can also be mounted on the chest. it doesn't come out like that.

NBB replica, well conceived, removable, in excellent abs, and with the entire metal mechanics, sufficiently precise and reliable.
The weight is not 600 gr. but 430, so I added weight in various points to make it reach at least 500gr.
Now it's well balanced..
And now also white dots for front and rear sight.
I recommend this product for its value for money and because it lends itself to a very all-round use.

Bought it together with ST23 NON-BLOWBACK Heavy Weight Gas Pistol [STTI] and overall great purchase for the price.Only thing to take into account that for bigger pistol replicas with silencers even after adjusting - can not fit

Really nice spring-based mechanism that easily adapts to a lot of different pistols sizes (I tested a G17, AAP-01 and 1911), all tested ones fit without any wobble. All you have to do is loosen or tighten two screws depending on the width of the slide.

I bought the holster primarily for a mk23, but it really accepts a lot of pistols. For example fn 5-7, sig p226, 1911, hi-capa, glock variants, etc. The mk23 is a bit cramped in it, but it's not disturbing. Regardless, I can quickly take the pistol out of it and don't have to strain to put it back.

This holster is Superb !
Its the second being bought.
The first one did fantastic job protecting AAP 01 as my bro fell on it(+100 kg!!!)
The holster catch broke but the pistol was unschratched and undamaged.
Its still holds pistol but with no catch.
So for a small investment u protect your gear.

Probably the best holster available for multiple Guns. I tried 4 different ones and because you can adjust it, they all fit. Very happy with it and will buy exact same one if it breaks. Which probably won’t happen because the plastic is sturdy but not stiff and has minimal moving parts

ST8 NON-BLOWBACK Heavy Weight Gas Pistol [STTi] fegyverrel , ebben az árkategóriában megtaláltam azt amit igazán kerestem. Egy erős és megbízható fegyvert. A megadott technikai adatokra hagyatkozva talán a legerősebb a társai között. Igaz valós mérést nem tudok eszközölni, de a próbalövések igazolják az adatokat. Eddig 3 tárat lőttem ki 1 gáztöltéssel. Súlya miatt érezni hogy van a tokban valami.

This holster is my favorite out of all. I had a little bit of fear concerning the steadiness of the holstered weapon, but it is prooven that I shouldn't have done so. It is easy to adjust, comfortable and holds the pistol in place. I have a Beretta M9, but I'm pretty sure it would take also Glock or 1911 platforms. Its material is good too, I don't think it will break during any of the games.

Excellent choice if you have pistols. You can use an Allen key to make it more tight (for thinner pistols) or loose (for wider pistols).

After some initial loosening, the KJW MK1 (Ruger/Nambu replica) can be fitted (though it can move a little up or down inside, but would not fall out), if you loose it more, the CYMA CM.127 (Glock 18C) and even more it is enough to put the STTi ST23 (MK23) in it, without the silencer.

Great Holster that fits both of my Airsoft Pistols,

my random Amazon (probably Umarex) M9two Spring-Pistol, and my Cm.030 G18C. First couple of times, getting the Gun of the holster is tough, but you will get a feel for it, and it gets easier.

Cant go wrong with this one, if you own a CM.030.

What a great thing! If you are using multiple handguns this holster can hold -almost- all of them! Fit: Glock, Hicapa, Beretta, ICS BLE, aaaaand even AAP01 very well! Plus you can attach to any plate. In short excellent product, I would recommened to anyone!

This is a solid Product. Simply adjust the width of the hole with the two screws to the chosen pistol and it fits.
There are plastic leaf springs in the holster to stop any wobble of the pistol and adjust to any pistol.
It worked good with the AAP01.

The included belt paddle works fine with battle belts of any kind.
I have a battlebelt with molle, and you just have to loop the normal belt over two molle slots and the paddle fits solid.

Very happy with this. Fits my G19, hicapa, and AAP01 with a good snap. Does not fit the Mk23 or the 6" revolver, but that shouldn't come as a surprise. Paddle holster is stable and can be swapped out.

Great holster, easy to adjust to fit many pistols. I use it for my ICS KORTH but I have tried it with other pistols too. You adjust the fit of the gun by turning the hex screw on the side with the hex key that is provided wich is much appreciated. Fits well on a belt.