Levres chargeur - HI-CAPA [GUARDER]
Promotion
Notre prix*:
$3.72
Dernier prix avant la promotion: $5.32
-
Formes de livraison
Entrer le Pays et le code postale, afin de voir les couts de livraisons.
-
Spécifications techniques
Fabricants: GUARDER Code: CAPA-56 EAN 4711225767307 Poids 2 g Matière nylon Quantity in package pcs 1 -
Opinions
Ajouter un avis-
- 18.05.2024 A écrit:A quality replacement part from a very good producer. I installed it with no problem on a TM magazine and on a Well magazine. Exelent product! Don't drop the magazine on a hard surface; the lips are plastic and they will break. Also, don't pull the bb follower all the way down and then release it - this action will also almost certainly destroy the mag lips
-
- 13.12.2022 A écrit:Well, I have had a very bad experience with my mags for WE-Tech Hi-Capa 5.1. Due to the lip damage on my Hi-Capa magazine's replica I've ordered this mag lip from Guarder. So it fits well. Good for WE-Tech Hi-Capa mags. Also I've tested it on the airsoft field, so no problems with this product. Highly recommended it!
-
- 08.11.2022 A écrit:The magazine lip fits nice and tight and feeds and feels really nice. They feel like they could really take a beating before breaking. It’s also nice that you also get the pin for assembling it. Only downside is that it was hard to get the pin in place.
-
- 22.05.2022 A écrit:When I orderd my new SRC Babayaga with the first try the magazine fall out from the pistol to the lips of course and it has broke down. I ordered this lip for spare and tried our. Definitely not compatible with SRC. Thanks for misinforming...
-
- 06.05.2022 A écrit:It fits and feeds well for army armament hicapa replicas as well! I revommend it for everyone, whose previous maglip was brokwn and needs to replace it.
-
-
Demander un produit
Levre de chargeur renforcée dédiée aux chargeurs HI-CAPA 5.1 / 4.3
Il s'adapte parfaitement aux répliques de fabricants telles que Army Armament, SRC, KJW, Marui.
Elles sont faite de nylon avec un mélange de fibres, ce qui les rends beaucoup plus durable.
Il s'adapte parfaitement aux répliques de fabricants telles que Army Armament, SRC, KJW, Marui.
Elles sont faite de nylon avec un mélange de fibres, ce qui les rends beaucoup plus durable.
Consignes de sécurité et d'utilisation
Ce produit répond à toutes les exigences réglementaires. Assemblage professionnel requis. Commandez le service d'assemblage chez Taiwangun ou consultez les ressources ci-dessous. Attention: contient de petites pièces, ne convient pas aux enfants de moins de 14 ans.SKU: CAPA-56 · EAN: 4711225767307 · Levres chargeur - HI-CAPA [GUARDER] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant 

Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:
LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques
Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport