Ensemble complet tuning 550 fps MB01, MB05, MB06 i MB08 [WELL]

Belle finition, fonctionne parfaitement avec mon mb06, seul défaut, un peu puissant pour oe cylindre d'origine qui m'a lacher après une partie. Mais bon,si on monte un cylindre renforcé (si possible cnc), tout va bien et on se retrouve avec une puissance de tir largement suffisant

Parfait pour faire une fiabilisation sur un sniper well MB08....le seul regret serait que le ressort livré avec et beaucoup trop puissant....la replique tape a 2.2 joule et 530 FPS.
Il serait plus profitable de livrer ce quitte avec un M130 afin d approcher les 1.9 joules reglementaire.

Bon rapport qualité prix il augmente netement les capacités de votre réplique de MB il faut mieux changer le bloc de detente pour un bloc de detente renforcé vendu par Well si vous voulez que l'upgrade soit vraiment efficace.

Geras daiktas

It was a perfect upgrade for my sniper. It was easy and quick to order. After the arrival, I installed it and tested it without any error. There were problems with the delivery (with a delivery company), but I received a lot of help in this as well. Thanks agains Guys!

Installed this kit into a well mb06. The mb06 internal parts this replace, feels like cheap plastic, and this kit lets all the parts be prober metal.

The gun it fits already have 90 degree trigger and metal cylender, at this kit is fairly easy to install and use. I would recommend it for anyone considering the well mb06

This amazingly cheap upgrade set fits my MB06-type sniper very well. I actually have Urban Sniper, but it is based on Well MB06. The only issue I have is that the piston sometimes refuses to be "caught" on trigger and the replica just doesn´t load, but that might be due to a little worn out trigger - but it was not an issue with the original set.

Advantage of this set is that it includes a bearing so your spring is free to twist, which is a natural movement when it is compressed and if there was no bearing, it would get destroyed faster.

I measured it at about 500 FPS but 550 FPS might be achievable if all parts are re-sealed perfectly.

The spring is definitely heavier than the original one, but I am pretty small and weak and I can still load the replica reasonably fine - but I definitely feel the difference.