+48 123626134 [email protected]
ZC Leopard  P000324 | Manque temporaire
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock
  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: ZC Leopard
    Code: P000324
    EAN 5904420003410
    Poids 180 g
    Longueur 89 mm
  • Opinions

    • - 17.12.2025 A écrit:
      Affordable and good high torque motor. I have bought a couple of these already and they work great. Sadly I snapped the connecting tab on one of them by accidentally bending it, so be careful about connecting and disconnecting the wires.
      Avis d'opinion: 0
    • - 03.08.2025 A écrit:
      Great motor! It improved my M4's single mode fire rate, but I think the automatic remained the same. Whatever, this fixed the problem, where my too fast trigger pull makes my gun stop shooting for a few seconds. It fits perfectly, runs perfectly. An affordable upgrade.
      Avis d'opinion: 0
    • - 27.03.2025 A écrit:
      Just prefect the power I was looking for.
      Easy to install and to regulate correctly.
      Packaging perfectly done. The motor is light for a long high torque motor.
      I just add nothing to say but good from the torque motor and it just fit perfectly with my m4A1
      Avis d'opinion: 0
    • - 20.05.2024 A écrit:
      A little noisy motor, but can pull m135 springs with fairly snappy trigger respons. Noisier on auto than on semi. Decent motor but I wouldnt buy it again, if you have a strict budget it might worth it. Havent tested it on stronger springs but it would probably perform better on m120 springs and lower.
      Avis d'opinion: 1
    • - 13.04.2024 A écrit:
      I chose this engine because the higher tpa value(22) allows me to achieve the faster trigger reaction.
      it works well, the gap was set properly, there are no problems with heating, good engagement with a factory gear. I got what i expected!
      I use for Double Eagle 904.
      Recommended!
      Avis d'opinion: 0
    • - 10.12.2023 A écrit:
      A high quality motor. Great finish, great torque. The pinion gear is secured with a small screw that is LocTited in. One potencial problem; it's longer then other "long" motors - about 2-3mm longer. At least longer then Cyma blue or SHS motors.
      Avis d'opinion: 0
    Ajouter un avis


Long motor for high-torque ASG replicas - 22 TPA.
This is a dedicated motor for models equipped with gearbox type V2.
This motor fits all replicas equipped with gearbox V2, such as M4, SCAR and others rifle models.

The High Torque type motor is designed to work with strong springs.
ZC Leopard company is known for the quality of its products, the motor uses neodymium magnets and copper rotor winding.

Specifications:
  • metal construction
  • copper coil
  • neodymium magnets
  • D type motor axle
When modifying the replica and replacing the engine, remember to choose the correct gears with the appropriate gear ratio. So that all elements work in the optimal range of their capabilities.


Consignes de sécurité et d'utilisation

Veuillez lire les informations suivantes pour une utilisation sûre du produit :
SKU: P000324 · EAN: 5904420003410 · High Torque Motor Long - 22 TPA [ZCI] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport