V2 Lightning (back wired) [PERUN]
-
Formes de livraison
Entrer le Pays et le code postale, afin de voir les couts de livraisons.
-
Spécifications techniques
Fabricants: PERUN Code: LI-V2-BW EAN 5907622628504 Poids 25 g Version gearbox v.2 Quantity in package pcs 1 -
Opinions
-
Demander un produit
MOSFET Perun V2 Lightning Back wired by Perun is a programmable electronic unit designed for AEG replicas with a V2 gearbox in the Tokyo Marui standard. The Back wired version uses optical and magnetic sensors, adaptive trigger control, and rear-routed wiring, supporting responsive operation and configurations with the battery placed in the stock.
Construction and design
Perun V2 Lightning replaces the mechanical trigger contacts, taking control of the replica's electrical system. The design uses optical and magnetic sensors responsible for detecting trigger operation, selector position, and gearbox cycle.The Back wired variant has wiring routed to the rear of the replica. This configuration allows the unit to be used in replicas where the battery is placed in the stock or rear part of the construction.
The unit works without modifications in most V2 gearboxes in the Tokyo Marui standard. The manufacturer indicates compatibility with brushed and brushless BLDC motors, gear sets including DSG, and a 7-17 V power range.
Electronic system
Perun V2 Lightning allows trigger sensitivity adjustment without modifying the trigger or gearbox. Adaptive control lets the user set the trigger travel from very short to longer, also in field conditions.The active brake stops the motor after the shot, helps reduce overspin, and supports proper gearbox cycle completion. Brake strength is adjustable, and the function can be disabled depending on the replica configuration.
The precocking function leaves the piston in the rear position after the shot, allowing the next shot to be fired faster after pulling the trigger. Precocking strength is adjustable and adapts to the current battery voltage.
Programming and operating modes
The unit settings are configured using selector and trigger sequences. Programming is supported by sound signals and a multicolor LED, without the need for an app or additional tools.Perun V2 Lightning allows independent programming of the SEMI and AUTO selector positions. Available functions include fire mode selection, binary trigger, DMR mode, and rate-of-fire reduction in full-auto fire.
The unit also supports a two-stage trigger, where a light and deeper trigger pull can activate different operating modes. Available combinations include semi-auto fire, burst, and full-auto fire.
Compatibility and installation
Perun V2 Lightning is supplied with a dedicated selector plate designed for most AR-type replicas. For replicas with a non-standard selector plate, the manufacturer includes a magnet with double-sided tape and a positioning tool.After installation, the fire selector can be calibrated to correctly detect operating positions. The selector sensor uses a magnetic Hall sensor, which is not affected by external light, supporting unit operation also in replicas with cut-out receivers.
The unit is designed to work with Perun trigger accessories for V2 gearboxes, such as Clicker V2, Clicker V2 PRO, and Speeder V2. These accessories allow the trigger characteristics to be further adjusted to the user's preferences.
Safety and diagnostics
The low battery voltage alarm warns the user with sound signals when the voltage drops to a level requiring use to be stopped. The unit automatically detects the number of cells and selects the alarm threshold.The diagnostic system monitors both the replica and the unit itself. The LED indicates detected problems, such as a jammed motor, overheating, short circuit, or sensor error, making troubleshooting easier.
The electronic resettable fuse cuts off power in case of a short circuit or gearbox jam. After removing the cause and reconnecting the battery, the unit can return to operation without replacing the fuse.
Manufacturer
Perun is a manufacturer of electronics for airsoft replicas, specializing in MOSFET/ETU units, drop-in systems, and accessories for trigger operation configuration. The brand's products are designed for adjusting replica performance, protecting the electrical system, and adapting operating characteristics to the user's playstyle.Consignes de sécurité et d'utilisation
Veuillez lire les informations suivantes pour une utilisation sûre du produit :Signalement d'un problème de sécurité · Personne responsable et fabricant
LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques
Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport


