+48 123626134 [email protected]
Changer la langue en anglais Changer la langue en polonais Changer la langue en français Changer la langue en espagnol Changer la langue en allemand
Press Corner
Connexion | Inscription
0 0

Montage optique pour AK [CYMA]

Bestseller
CYMA  FBP0372 | Disponible
Notre prix*: $10.41

Changer Livraison gratuite à partir de 250 € ou à partir de 9,50 € pour la livraison par Mondial Relay Tout sur le livraison : France

  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: CYMA
    Code: FBP0372
    EAN 5901698404543
    Poids 180 g
    Matière aluminium
    Longueur 133 mm
    Hauteur mm 90

  • Opinions

    • - 05.08.2026 A écrit:
      S'adapte parfaitement sur mon AKs74U cyma cm045, il faut juste démonter le rail picatinny et le mettre dans l'autre sens comme cité dans d'autres com. (merci d'ailleurs) Idem pour l'ajustement du serrage petit vis en dessous de la fixation à resserrer et plus rien ne bouge, full metal rien à dire vraiment top
      Avis d'opinion: 0
    • - 09.04.2026 A écrit:
      S'adapte très bien sur la cm 099 et 058.

      Par contre, si on est un peu bête comme moi, il faut 5 minutes pour comprendre que le réglage de la largeur se fait en poussant et en serrant la pièce du dessous.
      Le seul point noir, est le fait d'être obligé de défaire le rail pour la cm058, puisque la batterie vient sous le couvercle du bloc culasse.
      Avis d'opinion: 0
    • - 08.05.2025 A écrit:
      Acheté pour être monté sur un CM099 de chez Cyma, cet accessoire s'adapte globalement très bien au rail latéral de la réplique. L'installation est simple et rapide, le montage reste bien en place une fois fixé. En termes de compatibilité, je n’ai rencontré aucun problème majeur avec le rail spécifique du CM099. En revanche, j’ai remarqué que le viseur est légèrement décalé vers la droite par rapport à la mire d'origine de la réplique. Cela ne gêne pas trop pour une utilisation airsoft classique, mais cela peut demander un petit temps d'adaptation ou un ajustement si l’on cherche une visée parfaitement alignée. La qualité de fabrication est correcte pour le prix, le produit est robuste et semble pouvoir tenir sur la durée. Pour un usage loisir, c’est un bon rapport qualité/prix. En résumé, je suis satisfait de mon achat même si un meilleur alignement du viseur aurait rendu l’expérience parfaite. À recommander si vous cherchez une solution simple et abordable pour ajouter un viseur à votre CM099. Sinon, prenez le side mount SVD
      Avis d'opinion: 0
    • - 30.04.2024 A écrit:
      Support de lunettes latérale entièrement en aluminium avec fixation très rigide. Compatible avec ma AKS74U de chez GHK, le rail picatini est bien dans l'axe du canon. Le rail picatini est maintenu par deux vis qui permettent de moduler la position en arrière ou d'installer un rail plus long
      Avis d'opinion: 0
    • - 25.04.2024 A écrit:
      Bon rapport qualité / prix
      Personnellement je l'ai monter sur un vss vintorez.
      avec une Lunette de tir Victoptics ZOD 1-4x20IR et le Honeycomb Sunshade
      ça marche bien et ca reste cohérant avec le style ruse.
      Avis d'opinion: 0
    • - 17.04.2024 A écrit:
      Très ferme et très dure semble être en allu ou en alliage

      Mais semble aussi très solide

      Pour un montage sur un aku, il faudra démonté le rail picatiny pour le reculé

      Pour un visage serrer je vous invite aussi
      A faire un tour de plus de la patte de serrage

      J'ai du le faire sur mon sku dboy

      Je recommande à tout les possesseurs d'ak ^^
      Avis d'opinion: 0
    • - 02.05.2023 A écrit:
      FR:
      Le rail est vraiment facile a installer, petit conseil j'ai une ak74u cyma pour l'installer il vous faut devisser le rail picatinny et le retourner pour que le rail glisse facilement sur le montage latéral.

      EN:
      The rail is really easy to install, little advice I have a ak74u cyma to install it you have to unscrew the picatinny rail and turn it over so that the rail slides easily on the side mount.
      Avis d'opinion: 1
    • - 21.04.2021 A écrit:
      Il y a l'adaptateur et les finitions sont bonnes
      Avantages:
      Très solide
      S'adapte très bien avec mon ak
      Inconvénients:
      Assez galère à monter mais une fois qu'on a compris ça va
      Avis d'opinion: 0
    • - 30.07.2026 A écrit:
      Acheté pour monter sur mon VSS cyma, nickel!
      J'ai pu mettre mon red dot dessus ou ma lunette en picatinny sans soucis. Le montage a l'air assez robuste, je n'ai pas eu de souci en plus d'1 an de jeu avec. Pour le prix, je peux que recommander. Je crois qu'il est même mieux que le montage SVD.
      Avis d'opinion: 0
    • - 02.07.2026 A écrit:
      Locking lever snapped immediately, but then again it is a cheap mount. Sits thight on my Specna Arms at least.

      Will try to replace it with an M6 screw. Other than that it seems to be a solid mount for a cheap price.
      Avis d'opinion: 0
      Odpowiedź sklepu:
      We’re sorry to hear about the issue with the locking lever. Thank you for sharing your feedback, and we hope replacing it with an M6 screw solves the problem. We’re glad that otherwise the mount meets your expectations.
    • - 03.06.2026 A écrit:
      The spring on the bottom is hard to get to but after twisting it for a little and everything should be good it attached firmly, very stable and reliable. The black colour goes to almost anything. Not the lightest but it doesn't need to be when its this strong.
      Avis d'opinion: 0
    • - 24.04.2026 A écrit:
      Using it on an LCT AK-74.
      The quick release lever snapped off within 5 minutes of owning this thing, while trying to adjust it to my rail.
      Replaced it with a normal M6 bolt + Shim, works fine with that.
      Sits rock solid with this setup, just requires a spanner to put on / take off.
      Avis d'opinion: 1
    • - 16.04.2026 A écrit:
      Works well. Easy to adjust without tools. Easy to put on and off the side mount. Sits really solid.
      The picitinny rail is a bit on the thin side tho. Needed some electrical tape to keep my reddot secured otherwise it will slide off.
      Avis d'opinion: 0
    • - 09.04.2026 A écrit:
      Én egy cyma aks 74u hoz vásároltam. Tökéletesen illeszkedik miután beállítottam a hézagolást.

      A Ris sint meg kellett ugyan fordítani hogy az itányzéktól elférjen.

      De köszönöm, ez egy jó termék.

      A szállítás és csomagolás gyors és pontos volt mint mindig.
      Avis d'opinion: 0
    • - 16.03.2026 A écrit:
      It fits my specna arms j05 perfectly because it can be adjusted to fit any type of ak type rifles. It fot shipped fast the quality is not that bad to be fair, its full metal. Maybe the paint is very thin i think its going to scratch easily and look very scratchy, but it can be look good that way too.
      Avis d'opinion: 0
    • - 06.03.2026 A écrit:
      I installed this on my Cyma CM 031D. No wobble at all, holds 0 perfectly. It could take some adjustment from the screw underneath the clamp to get it to slide on the rail and then lock it in place. I can't guarantee how it will behave on an GBBR though, so do your research. Very satisfied with the purchase.
      Avis d'opinion: 0
    • - 16.01.2026 A écrit:
      I purchased this for a Cyma aks74u (cm.045a). Unfortunately it does not sit straight or level on the gun and it is not suitable for mounting an optic due to the misalignment.

      I have checked and the part seems to be square, and perhaps the issue is with the rifle, but i would recommend the shorter special rearsight attachment for the aks74u instead of this, which is excellent
      Avis d'opinion: 0
    • - 22.05.2025 A écrit:
      Nagyon elégedett vagyok vele. Specna arms ak-hoz vettem. Stabil, fém szerkezete van. Pont a replika középpontjába helyezi a reddotot nem billen se jobbra, se balra. Elején kicsit aggódtam de az akkumlátor cserét sem akadályozza.
      Avis d'opinion: 1
    • - 24.03.2025 A écrit:
      This one is a very good mounting option for replicas which use dovetail rails.
      Keep in mind that with this option you can't fold the stock on your Ak like before.
      Fits my cyma Aks perfectly, also it does fit the ares vz.58 without much complication. Altough because of the rare sling mount you can only put this up to the vz from the front, but for that you have to remove the catching pin on the rare side of the mount to do so (or remove the stock temporarily). But otherwise it fits perfectly and you don't have to buy the much more expensive dedicated one.
      Avis d'opinion: 0
    • - 12.03.2025 A écrit:
      It took me a minute to understand how this clips onto the Ak. I have an ICS ak74m but the mounts look identical. You have to pull the spring part down and adjust the height at which it sits in the clamped position. I had to back it down a little so it slips over the middle portion of the mount, and once locked down its very secure. My only complaint I cant leave it on if I plan to use iron sights as it blocks the view. Very satisfactory
      Avis d'opinion: 1
    • - 01.01.2025 A écrit:
      The CYMA AK-47 mount is sturdy and reliable, offering a secure attachment for optics or accessories. It fits well on most AK models, enhancing performance and aiming precision. Easy to install too!! I reccomend it very much
      Avis d'opinion: 0
    • - 18.12.2024 A écrit:
      It's a decent mount for AK,very sturdy and practical!You can easily remove and install it.If you adjust the small screw properly, it will fit perfectly and won't wobble. If someone doesn't have any luck with putting it on, you can search for it on YouTube, there are plenty of tutorial videos.I recommend it!
      Avis d'opinion: 0
    • - 07.11.2024 A écrit:
      Looked for some gear and gadgets for my airsoft loadout.
      Came to taiwangun and was suprised with their good prices and good website.

      Ordered the ak side mount and some other stuff. Placed the order on friday and recieved it on the monday after so very happy with shipping speed and packiging is awsome.
      Quality of the product is very good.

      I was a little sceptic at first but turned out great.

      All in all very good stuff and great service cheers to the taiwangun team.

      And i will be ordering stuff for sure in the near future.
      Avis d'opinion: 2
    • - 13.04.2024 A écrit:
      Fit my Bison well, does the job it's designed for very well a little tricky to get attached on first attempt ( it used a castle nut spring loaded clamp) but once you get used to it it's very easy to set up quick release a big plus for transportation.
      Avis d'opinion: 0
    • - 11.03.2024 A écrit:
      Geras patiko greitai įsidėti greitai nujimti
      Avis d'opinion: 0
    • - 02.03.2024 A écrit:
      Fits very well on my Cyma RPK(CM.052A).
      But you can not lock in the foldable slot in the folded position as expected.

      You just have to get the tensioning nut right before installing then you are able to get it just right so it does not wobble and is easy to take off.
      Avis d'opinion: 1
    • - 20.02.2024 A écrit:
      Quality product, that does the job. It is pretty sturdy and the clip-on mechanism fits tight, once you figure out how to use it. It will probably take a beating, but I have yet to test that. On the rifle, it sits with the rail just a few millimeters off to the left, which honestly looks perfectly fine and you probably won't even notice it. Overall I'm satisfied with the product. If you want to retain the side folding stock, i would recommend buying a different kind of mount, however it's not a problem to just pull the mount off when transporting your gun.
      Avis d'opinion: 0
    • - 05.02.2024 A écrit:
      Excellent choice for AK or SVD series. Fits for my CYMA 048A and also for AGM Dragunov manual sniper. You can set pressure force by just one screw so you are sure that it will stay in one position during airsoft battles. And the is price awesome. So there is no need to search for another mount. Grab this one!
      Avis d'opinion: 4
    • - 27.12.2023 A écrit:
      It is not steel, so its a star minus for me, but on the other hand it is pretty solid, the mount doesn't wobble if the settingnut is correctly set. It can fit bigger scopes (3-9x40s even). It is a nice scopemount, if you think about it, I think it is worth it.
      Avis d'opinion: 1
    • - 20.11.2023 A écrit:
      After adjustment, it holds well, it is not heavy, it does not wobble, it is not too high, the use of materials is also very good, I can only recommend it! I use AK-S74U replica, it is completely suitable for these replicas
      Avis d'opinion: 0
    • - 09.11.2023 A écrit:
      I used the mount for a Cyma AK, it felt sturdy and reliable even with the added weight of heavier optics/attachments.

      I slightly modified mine to fit with an AKU platform and it still works just as well as it would with any other long-barreled AK
      Avis d'opinion: 0
    • - 13.10.2023 A écrit:
      I bought it for Cyma 048, it fits perfectly. Cheap and quality for the price, I can only recommend it. The only thing is that they don't give mounting instructions and it wasn't clear to me how to mount it on the gun. But there are plenty of videos on the net on how to mount it.

      Cyma 048-ra vettem, arra tökéletesen passzol. Olcsó és árához képest minőségi, csak ajánlani tudom. Annyi, hogy nem adnak felszerelési útmutatót és nekem nem volt egyértelmű, hogyan kell felhelyezni a fegyverre. De neten rengeteg videó van a felszerelésről.
      Avis d'opinion: 1
    • - 22.09.2023 A écrit:
      Great product, i ordered it for my
      LCT AS VAL. I didnt know that it will fit but for the cheap price i took a gamble, and it fits pretty well. Small issiue is that it doesnt really hold well on the side mount only in really specific points but if you find it its very stable, and on the val its a little bit of the right but i can adjust the sight so thats not a problem for me. Im just happy that i found a mount that fits my gun.
      Avis d'opinion: 0
    • - 19.06.2023 A écrit:
      Now I HAVE HAD PROPLEMS WITH THIS MOUNT BEFORE . IT SEEMS TO NO WANT TO WORK WITH LCT, E&L, OR SOME CYMA AK74. I DON'TKNOW WHAT TO DO. I HAVE BOUGHT 10 OF THESE OVER MY 20YEARS OF AIRSOFTING. SO IF YUO ARE LOOKING FOR ONE THAT WORKS WITH EVERYTHING BUY THE G&P OR LCT BRAND. THEY WORK WITH EVERYTHING.
      Avis d'opinion: 0
    • - 18.05.2023 A écrit:
      Mount fits perfectly the Cyma cm.045A (AKS-74U) as well as the Cyma cm.099 (VSS).
      It might need a little adjustment between the two models, but that's easily done by adjusting the small nut under the lock lever to loosen or tighten the grip.
      Avis d'opinion: 1
    • - 12.04.2023 A écrit:
      Short summary: A perfectly fitting (!) metal (!) RIS plank sight mount for your dovetail.

      It's absolutely elementary to get on and off, and takes less than a minute of adjustment and just a few seconds to get it on the gun itself. The adjustment process is simple: a screw (for which you don't need a tool, it's intended to easily turn with just your fingers) in the middle is used to tighten the grip of the plank on the dovetail mount. A lever housed on top of the lower part of the square opens, then you just slide the part on the dovetail plate from the side, fixating it with closing the lever.
      If it feels wobbly or wouldn't get on the gun's side dovetail mount, just move the screw with a spring up or down. As for the RIS railing, it fits both of my sights (holographic and an Walther MRS-style red dot) perfectly. There is a lot of space and you could even fit rifle scopes with ease.

      Pros:

      + Affordable price
      + Sturdy (metal) material
      + Many fitting space
      + Easy to get on and off
      + The color goes along with the gun's receiver well

      Cons:

      None found!
      Avis d'opinion: 0
    • - 31.03.2023 A écrit:
      It is a sturdy and reliable accessory for any AK or SVD series rifle. With the ability to mount any scope or red dot, it offers versatility for players. However, I should note that the mount is heavy and requires some overwinding to fit securely on the side rail. The length of the upper rail is 133mm, providing ample space for mounting accessories. Overall, a high-quality mount.
      Avis d'opinion: 0
    • - 22.03.2023 A écrit:
      Really love it! Bought it for my Double Bell BY-001A. You'll have to turn the rail around to make it fit, because the rear sight block is in the way. You will also have to tighten the nut that holds the clamp, so that the mount won't rattle. but other than that this mount is perfect!
      Avis d'opinion: 0
    • - 16.03.2023 A écrit:
      Took a gamble to see if it fit my LCT, glad to say it did and gives it a super clean look, perfect if you want to use an optic of some kind! Careful though, like even real steel mounts, it might take some fiddling to get it secure and in the correct place, so be patient.
      Avis d'opinion: 0
    • - 15.03.2023 A écrit:
      High quality gear. We ordered it through Taiwangun.com, as it was already tested quality and speedy delivery experyence. High quality gear. We ordered it through Taiwangun.com, as it was already tested quality and speedy delivery experyence.
      Avis d'opinion: 0
    • - 21.06.2022 A écrit:
      It's a great mount for your optic. I had to flip the rail 180degrees on my Cyma CM045C because the rear sight was blocking the rail from fitting correctly, but other than that its perfect. Doesn't wobble at all and holds on to the gun really tight when adjusted correctly.
      Avis d'opinion: 0
    • - 01.06.2022 A écrit:
      This is a solid mount for CYMA CM.036A AKM. It fit on with no problems. It is full metal and easy to install. I like how mine came packaged nicely in a small brown box. This is good since the box protected my rail mount from getting scratched during shipping.
      Avis d'opinion: 6
    • - 12.04.2022 A écrit:
      Fast shipping, good quality, but the installation process was a bit complicated, but after watching a tutorial on YouTube its was very easy.

      Scope fits perfectly, stays sturdy, doesn't wobble. Great product.
      Avis d'opinion: 1
    • - 11.01.2022 A écrit:
      Hello TaiwanGun.

      I have bought it together with Scope 3-9x40 with high mount rings [PCS] and Koer SVD.

      The mount fits perfectly and the scope sits wel. It doesn't move at all. You can even change how tightly it sits with a little bolt in the bottom side. I can use the scope with a face mask without any problem.
      Avis d'opinion: 2
    • - 08.12.2021 A écrit:
      For my ak74u I had to rotate the rail segment, other than that it fits great.

      You can adjust the snugness by pulling the screw upwards and adjusting it until it locks in the hole, test the snugness and adjust repeat this until it fits nicely
      Avis d'opinion: 0
    • - 26.11.2021 A écrit:
      TL:DR - great quality mount for sights/optics.

      I use this on my weapon to mount an optic scope. It doesn't wobble, holds firmly and gives a good quality for its low price. The only small problem is that sometimes it gets tricky to take it off in a hurry, but otherwise, absolutely worth getting.
      Avis d'opinion: 0
    • - 09.09.2021 A écrit:
      Solide item
      Avis d'opinion: 1
    Ajouter un avis

  • Demander un produit

    L’administrateur de vos données personnelles est \ KRAKMAN P.Kiepura, K.Michalik Sp. k. ayant son siège à Cracovie, ul. Półłanki 18, 30-740 Kraków, NIP: 6793082897, REGON: 122593008. Les données à caractère personnel ne seront traitées que pour établir un contact avec vous et aux fins légalement justifiées du responsable du traitement. La communication de vos données personnelles est volontaire mais également nécessaire pour vous contacter. Vous trouverez des informations détaillées sur le traitement de vos données personnelles dans notre Politique de confidentialité sur les règles de traitement des données personnelles Les champs marqués d'un (*) sont obligatoires

Accessoires pour répliques airsoft - améliorez la précision et le confort — Vérifiez les autres produits de la série

NOTE : Le rail optique pour AK s'adapte aux montages latéraux des répliques des séries AK. Il permet le montage de toute lunette de visée adaptée aux rails RIS de 20-22 mm. La longueur du rail supérieur est de 133 mm.


Consignes de sécurité et d'utilisation

Ce produit répond à toutes les exigences réglementaires. Attention: contient de petites pièces, n'est pas un jouet. Ne convient pas aux enfants de moins de 14 ans.
SKU: FBP0372 · EAN: 5901698404543 · Montage optique pour AK [CYMA] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport