Poignée courte pour garde main en systeme MLOCK - Black [FMA]

Cette poignée est excellente. Sa taille compacte permet une prise en main très intuitive sans pour autant encombrer la réplique. Elle s'installe parfaitement sur le système MLOCK, sans aucun jeu une fois fixée. C’est un accessoire indispensable pour améliorer la stabilité

Poignet vertical montage M-Lock,
facile d’installation
Facile d’utilisation
La prise en mains est correcte
L’accessoire est très solide
Stabilité de la réplique 100% efficace
Parfait pour toutes réplique avec kit M-lock

Très résistante et pratique.
Fixation M-LOK parfaite sur rail métal.
Le petit compartiment permet d'y loger des piles pour optiques.

Super poignée, quand elle est fixée elle ne bouge pas.

Très bon poigné. Bonne prise en main .attention au garde-main fin car la partie haute peu créé une accroche dans les feuillages.montage simple et rendu top sur ar15. Je rachèterai les yeux fermés pour une future réplique.

Very confortable because of the stipling and very sturdy thanks to the fact there's a metal layer underneath and you can even store some batteries in it because it's hollow

Poignée très correcte.
Les + : bon grip, agréable, plutôt bel effet (je l'ai pris couleur désert), vraiment pas cher.
Les - : chiant à fixer, mais une fois que c'est fixé c'est du solide et ça ne bouge pas.
Pour ce prix là on peut pas se tromper.

Poignée en plastique mais solide.
Très pratique et facile d’installation!

Utilisée sur une m4 pdw arcturus.

Très bon feeling et solide !

À voir sur le long terme mais pour le prix c’est top ! Je recommande.

De Element korte verticale handgreep voor M-LOK is een prima keuze voor wie meer controle en stabiliteit wil zonder extra bulk toe te voegen aan zijn replica. Het compacte ontwerp zorgt ervoor dat je wapen wendbaar blijft, terwijl de grip toch voldoende houvast biedt tijdens snelle bewegingen en target transitions, iets wat kenmerkend is voor dit type accessoires. Vergelijkbare M-LOK grips staan bekend om hun lichte gewicht en directe montage, wat installatie eenvoudig en betrouwbaar maakt.

De bouwkwaliteit is degelijk voor de prijsklasse, al voelt het materiaal wat minder premium aan dan duurdere merken. Toch maakt de ergonomie veel goed: de grip ligt comfortabel in de hand en kan ook als handstop gebruikt worden, wat veel spelers als voordeel zien. Al met al is dit een uitstekende budgetoptie voor airsoftspelers die functionaliteit en eenvoud zoeken zonder teveel te betalen.

Good product!

Instagram @mutants_airsoftlv

Ergonomic, nice that it is not straight vertical, it is a little bit angled.

Had to adjust a little bit
Cut off some plastic to fit perfectly on my airsoft gun.

Easy attachment on an M-LOK rail. This grip has one screw in the middle and two nubs that keep it aligned. It feels fairly secure and does not wobble or come loose, but I would have preferred two mounting screws for more strength

It is made out of a good quality polymer, looks good and has no cast marks. Definitely a good choice for anyone who wants better ergos on their replica.

Very easy to install, fits very nicely and does not move at all when tightened.

Vertical grip short for mlock handguard (element) in black color. The grip is very light, gives a much nicer look to the replica and is very easy to mount. It fits very nicely on the hand, I recommend it this product

1. Build Quality and Materials
Material: The grip is made of high-density polymer, which strikes a good balance between durability and weight. It feels sturdy yet lightweight, ideal for players who prioritize maneuverability.
Finish: The matte black finish is uniform and resistant to scuffs. It complements most M-LOK handguards, blending seamlessly with tactical setups.
Grip Texture: The subtle texturing ensures a secure hold, even with gloves or in wet conditions.
2. Design and Ergonomics
Size: As a short vertical grip, it’s compact and perfect for players who prefer a low-profile accessory. It provides just enough surface for a secure hold while minimizing bulk.
Ergonomics: The shape is well-contoured to fit the natural curve of your hand, enhancing comfort during prolonged gameplay.
Versatility: The short size makes it suitable for various grip styles, including a traditional vertical grip or a thumb-over-bore technique, depending on personal preference.
3. Compatibility
M-LOK System: Designed exclusively for M-LOK handguards, the grip attaches securely with minimal wobble. The mounting system is precise, ensuring a tight and stable fit.
Ease of Installation: Installation is straightforward, with clear compatibility for standard M-LOK slots. The included screws and tools simplify the process.
4. Performance
Stability: The grip provides excellent stability when aiming and firing, particularly during rapid or sustained fire. It helps control recoil and ensures consistent performance.
Weight Reduction: Being polymer and compact, it barely adds weight to your setup, making it ideal for players focused on agility.
Tactical Utility: Perfect for CQB and mid-range scenarios where quick, stable handling is crucial.
5. Durability
Stress Test: The grip withstands rough handling, including drops and impacts, without cracking or deforming. It’s durable enough for high-intensity gameplay in outdoor and urban environments.
Weather Resistance: The polymer construction resists light rain and dirt, maintaining its integrity in various conditions.
6. Aesthetics
Low Profile: Its compact design and sleek matte black finish ensure it enhances the overall look of your rifle without drawing unnecessary attention.
Modern Tactical Appearance: The design is clean and functional, aligning well with modern airsoft builds.
7. Price and Value
Cost-Effectiveness: Priced affordably, it’s an excellent value for players looking to enhance their rifle’s ergonomics without overspending.
Comparison: Compared to longer or metal grips, this polymer short grip offers a more lightweight and cost-efficient option while sacrificing some surface area for a cleaner, compact profile.
8. Pros and Cons
Pros:

Lightweight yet durable polymer construction.
Compact size is ideal for low-profile setups.
Comfortable and versatile for different grip styles.
Easy to install on M-LOK handguards.
Affordable without compromising quality.
Cons:

Limited surface area compared to full-sized vertical grips.
Exclusively for M-LOK systems (not KeyMod or other handguards).
May not suit players with larger hands looking for a more substantial grip.
9. Final Verdict
The Vertical Grip SHORT for MLOCK Handguard - Black [Element] is a fantastic addition for airsofters seeking a compact, reliable, and affordable vertical grip. Its ergonomic design, lightweight construction, and compatibility with M-LOK handguards make it a practical choice for improving handling and maneuverability. Whether you’re running a CQB loadout or a lightweight rifle setup, this grip delivers solid performance at a budget-friendly price.

Simple and great.
When I first took it in my hands, I was a little afraid, because there is a screw fastening option. As soon as I installed it, my opinion changed, the attachment, which seemed weak at first, does its job perfectly, it is stable, easy to grip, the material and pattern of the handle are suitable so that it does not slip out of one's hand.

Ottima qualità dei materiali, misure giuste.
Perfetto, mi ci trovo molto bene lo uso come impugnatura anteriore sul mio noveske.
Comodo anche lo scomparto interno accessibile tramite un tappo in gomma

The grip is quite small and made out of a hard, good-quality polymer. The installation of the grip onto the replica was a bit challenging, as it was pretty hard to rotate, and I wasn't always sure if the screw was fully in place. But even though it is fully screwed in, because of the single m-lock on the grip, it jiggles a bit, not much, but enough to be a bit noticeable. Other than that, it's completely usable.

Great quality foregrip, feels good in the hand and pretty sturdy plastic.
Have 2 of these, on of them had the screw hole not fully open, which required a bit of push with a screwdriver to fully open, and putting the screw in without a magnetic Alan key is just a crime :))
Had a bit of a hard time attaching it to my weapon as the M-lock system overall gives people hard time sometimes, but once I figured out how to do it , the second handle went smoothly on my second weapon

Fits great on m-lok “rails”. The base is a bit thick so it will protrude a tiny bit if you have a very thin handguard. Natural angle for the hand, almost in line with the angle of an m4 grip. Works fine and feels sturdy.

It is okay, nothing special.

Alapvetően ellátja a feladatát, semmi extra.

Good product for airsoft guns, fits very well to all my replicas, no wobbling at all. Very accessible product, however, high quality. I would defiantly recommend to every one, makes gun easier to handle.

This became my favourite forgrip the moment i installed it. It is very good, comfortable and it is from good plastic, there is space in it if you want to hold something there. I definitely recommend it to everybody

Pollymer, but quite good quality, you can easily fit it to your replica. Very cheap and very good modification to any replica, you will get more stability, more comfort for fast aiming. Recommend for everyone

I can't praise this MLOK angled vertical grip enough! The build quality is absolutely top-notch, it feels incredibly solid and comfortable to hold. What's truly remarkable is the affordability - you're getting a premium grip without breaking the bank. It has significantly improved my control and stability during airsoft battles, making it a must-have addition to my gear. Whether you're a budget-conscious player or not, this grip delivers exceptional value. I couldn't be happier with my purchase, and it easily deserves a solid 5-star rating!

Fits perfectly for my CYMA polymer M-LOK handguard.
It is a durable, short vertical grip that can also be used as a handstop.
You can angle it forward or backwart thanks to its design.
It is lightweight and adds to the look of the AEG.

Good quality. It's not the best there is due to only one screw holding it in place but it does the job. I don't think you can go wrong with this, especially fo the price point. I recommend this because you can hold your gun better, at least I can.

Great stock. It fits my M4 MLOCK rail very well. It feels sturdy and overall great feel in the hands, the gun also looks better with the grip installed. You only need 1 torex screwdriver and youre good to go.

Its a grip,works fine,going to use this on a ar47 banshee by cyma plat by cutting it at a slant like a russian cut vertical grip,but this will be lighter and cheaper, the other versions i have of this also work great and the flap is useful for batteries or other skirmish snacks you can fit in (keep in mind batteries and hard objects will make a thunk rattling noise inside of it unless you pack it)

A very nice and sturdy grip for Mlok rails. I bought this for the looks alone but actually, it made my playstyle a lot more fluent. I have average size hands (I'm 183cm tall) and it fits my hand really well.

Installation is easy, the hardest part was getting the grip to stay in its place when positioning it. Once installed, it does not move at all, I am very happy with this grip.

One point to notice: the hex screw that comes with the grip is a bit too short - make sure you have some tools to easily access the screw.

Sturdy and comfortable.
Locks in place well and using it is satisfying.
Price is good and getting it to your collection is a good idea in case you need it in some scenarios.
Has rubberized bottom door to a compartment where you can store some small stuff.
Good!

What can I say? Maybe the second best purchase I ever had in airsoft. Good size, good quality. And this grip have a “hidden” storage. You can easily store small tools inside the grip. So if you want to adjust your scope or red dot, you just open the bortom of the grip, pick the tool, adjust, put it back, and close it back.

Works great with my M904L. Love that it's a storagespace inside the grip. Great for emergency item such as matchsticks, lighter or why not backup BB's? A small storagespace on your replica can really come in handy, pun intended

A nice, basic vertical grip. To me it looks like that it has a slight angle to it.
On the bottom there is a small door; it has a small compartment inside (maybe you could fit 2 AA batteries inside).
It fits securely on a metal M-loc handguard (on a Cyma Platinum M4).

I would say this is the best m-lock grip on the Taiwangun due to its price and quality. The grip is comfortable and made of sturdy plastic.
The grip is slightly angled which makes holding your weapon with comfort and less stress on the wrists. The grip also looks very good on my m-lock AK.