[Ensemble] KelTec KSG Bullpup Shotgun GBB Replica [EMG] + 30rd Shells for Airsoft Shotguns (6 pack) [DE]

Très bon rapport qualité-prix, très belle, sur (une réplique) fusil à pompe Golden Eagle, donne un aspect très réaliste avec le culot métal dans la cartouchière.

Cartouche pour fusil à pompe acheter pour un fusil à pompe Cyma Cm.360lm. Fonctionne nickel. Les marquage sont fait avec un autocollants, qui malheureusement se décolle assez facilement.
Sur les 30 cartouche commander, juste une seule avait un défaut (vide), mais me servira de cartouche de sûreté.

Feed well on a double eagle gaz shotgun, the shell is really shiny and the sticker look like it has been soaked up in oil or glue.
So good shell, bad details.
I would have rated them 3.5 stars but kot possible, so 4 stars.

Pour le prix, c'est franchement bien, moins cher que chez les concurrents, capacité de 30 billes soit 10 coup en tri shot, largement compatible avec le fabarm STF12 spring, gaz ou co2, qualité de l'origine.

Acheté pour mon CM.356M. fonctionnent parfaitement. Capacité des cartouches 30bbs ce qui permet de tirer 10 fois.
Seul petit défaut c'est l'étiquette décorative sur la cartouche, à cause d'elle la cartouche ne rentre pas sur le porte cartouche latérale de ma réplique, j'ai dû la retirer pour qu'elle rentre.

Produit de très belles qualités avec une très jolie finition et couleur. Produit super résistant s'adapte très facilement à plus répliques différentes est facile d'utilisation, je recommande fortement

Cartouche vraiment fiables, solides, ressort robuste, 30 coups par cartouches,je conseille d’acheter au moins de 6 à 9 cartouches au minimum, vraiment parfaites. Au niveau qualité / prix je conseille vivement. Merci pour ce matériel formidable.

The work with GE shotgun and feed perfect. After a few uses the stickers start to tear from the shell. Don't press them to fully load it. The springs will have less retention. Better fill them max 27 bbs and they will last longer.

This set of airsoft shotgun shells is an absolute game-changer for anyone looking to boost their tactical efficiency and immersion on the field. Here is a detailed look at why this product stands out:
-High Capacity
-Flawless Feeding
-Rugged Build Quality
-Universal Compatibility

For any airsoft enthusiast running a spring or gas shotgun, this 6-piece set is the gold standard. It offers the reliability you need for competitive play at a price point that makes it easy to stock up.

TaiwanGun have some good quality stuff this shells Fits double eagle shotgun without any problems, does match the description on the website price was good (caught some sales) well packed, and good client service.
Delivered on time and as promised.

TaiwanGun have some good quality stuff this shells Fits double eagle shotgun without any problems, does match the description on the website price was good (caught some sales) well packed, and good client service.
Delivered on time and as promised.

Great shotgun, but has a lot of flaws.
Pros.:
Looks awesome, shorter than "normal" shotguns, easy to manouver in thight areas, the use of plastics and lightweight alloys makes it light and easy to handle.
Great gas efficiency, you can comfortably shoot (on 3bb setting) 4-6 shells, the last one wont have much punch, but it will shoot it out. (Ofc. it depends on multiple factors such ad temperature and used gas).
After maintenance, it shoots .28 bbs on setting 6 at a distance of 35-45 meters.
Cons.:
Out of the box, there were absolutely no hop up effect, not even with .20 bb.
The inside was full of greas, and the barrels were dirtier than something fresh out of the swamp. Took way more time to clean than should have.
No disassembly manual, or anything on the internet, it is not an exact TM copy, also it's an engineering nightmare. If you don't have mechanical knowledge and problem solving skill, you will have a really hard time. I absolutely do not recommend disassembly, there are 4 small springs that try and will fly off when you take the cheekplate off.
Hop up is non adjustable, also the hop up rubbers are not the best ones.
Conclusion:
I had to work on it before using it, but overall it's not s bad replica.
Looks and feels awesome, and if the grease is cleaned out of the barrels it works great, especially in cqb areas.
The spread is a bit tight, so you'll have to watch it.
If you like shotguns and bullpups you will love it, if you are a service persone, not so much.
Also, the 24mm shotgun tracer can be fitted on it, but the barrel needs a metal adapter, because the barrel can not withstand the mounting force from the tracer's mounting screws

The Golden Eagle KSG is the second, and in my opinion, the best KSG on the airsoft market, being cheaper, made of better materials and still performing well.

The KSG's box is very cool, and stands out compared to others (like the replica itself). The KSG comes with 3 30-round shell magazines.

The replica is well made, comfortable and easy to use, after some practice. Loading shells is quite different, but doable and very tactile and fun. I found the best way to load shells is to insert them at an angle, and once the locking lever has been passed, just push the shell in. Unloading is easy, keep the bottom of the replica toward the ground and the shell will simply drop out once the locking lever is pressed down.

Performance-wise, the KSG was hitting targets that were about 40 metres away, with good accuracy in 3-shot mode. In 6-shot mode, there's more spread, which is excellent. Range is reduced however. The replica can shoot about 100 times before needing to be refilled with gas, and the reservoir is removable (Taiwangun, please sell the tank separately so I can swap when necessary). There is some slight cooldown after 30 rapid shots, but if you need to shoot 30 times within a minute with a pump-shotgun, you have bigger issues :)

TL;DR: Fun shotgun with good performance, that stands out from the crowd. It is not really better than a normal gas shotgun, just different, and keep in mind that there is no recoil or blowback, as the gun is pump-action. I love mine, and I believe you will too.

Works well with both CYMA and Double Eagle shotguns, had no issues with them.

Loading them is a bit unpleasant sometimes but they get the work done, I would recommend to remove the stickers, they will start peeling and might be a bit frustrating.

They feed really well and they look really cool on my vest! If you interleave the red and black on your vest you can create a cool looking pattern on your vest/ gun depending on where you store them.

I would recommend these, they feed good, they look good, and they do what you need them to do for all your tri-shot needs.

they do their job, made out of plastic and seems sturdy, 30bbs fits on them so you have 10 shots with every shell, its a really good price for them. used with double eagle M56AL and works fine. i recommend a small bag or a stock pack for them.

These shells are perfectly accurate to the real shotgun shells its made from hard plastic its good quality i really enjoying the the reloading with these shells, the price is affordable and it has a decent capacity too, 1 shell can hold 30 bb-s it means you have 10 shots with one shell( if its a trishot shotgu ) i love it

Works well good what it's for. Using them in Cyma shotgun compatible whit it. Bit looks "cheep" unlike the origina Cyma ones but at the time when I've ordered the shotgun it was out of stok so I choose this but overall I'm happy whit them .

I recommend these for Double Eagle and such. Works with Cyma too and they look cool, but they have problems fitting into Cyma's M870 that I have. I recommend getting Cyma's ones to Cyma shotguns. You can find them on Taiwangun.

Works as well as the original ones that came with my shotgun, good thing to add in next to your shotgun purchase.
Quality is well, plastic but it seems strong so far. Overall good product worth grabbing if you are going to get a shotgun.

They work perfectly for cyma shotguns. I got 3 packs and one of the 18 shells broke. I suspect the spring deformed somehow as it now doesn't go all the way.
I also peeled the sticker from each shell as it gets torn and messy when I placed the shells in various holders and pouches. Some people may dislike the distinct "golden" finish of the "brass" part of the shell, but I don't mind some bling on the kit ;)

Great shells, if you want to play with the shotgun def a must, so you don't have to speedloader the 3 you get with the gun. A holster with shell holders should come in handy. or a bigger pouch on you.

Great shells, no problems! They load and shoot sublime, nice groupings over 15 mtr. Works great with my new Cyma CM366M and the CM366 shotguns I bought last week at Taiwangun, no issues.
I'm very glad with them. Have 4 packs from these type and brand.
Ad some siliconespray in it before you try them the first time, better for the spring that is inside the shell.
I advice every shotgunshooter to buy these shells.

Les cartouches sont bien, elles sont aussi compatibles avec un m870 golden eagle à gaz, niveau finition, les cartouches sont belles, elles ont un corp brillant, il reste quelques marques de moulure sur les tétine qui poussent les billes mais elle partent facilement

Standard airsoft shotgun shell, nothing new or crazy. Works as intended, and the color variety is a nice touch for anyone looking for replicating slug shotgun kits or darker shotgun loadout. Works with any standard trishot, or 6 shot airsoft shotgun.

the shotgun is quite simply extra it has a very good reactivity and the weight makes it very well in hand and stable in the shots having the gas in the handle is also very good because less prone to the cold I recommend

These are one of the best things i bought, feel good, look good and compatible with cyma shotguns too!

They fit 30 bb's, i think its a great value for its price.

I tested them with a cyma cm.366 and they worked perfectly.

They do their job well; no problems with them. Before first use I always take them apart and spray the spring with some silicone oil - just in case. To take them apart you need to remove the pin that goes across the bottom of the shell. After that you can remove the bottom of it and remove the spring.