[Ensemble] AT8701T Réplique fusil lever-action Short [Golden Eagle] + Ensemble rails KeyMod/Mlok en polymere - Balck [MP]

Bonne matière, qualité raisonnable.
Parfait pour mon AR15, ne bouge pas d'un poile même avant le vissage.
Ressemble au métal.
Petit sac de visses au top.

Accessoire rail M-Lock,
Installation plutôt facile
Les rails sont en polymères mais très solides
Niveau fixation de lampe, laser, ect la fixation ne bouge pas du tout
Dommage quel les dimension des rails soi toute différente

Accessoire au top

c'est du costaud! Un kit complet de rails très bien pensé et fourni avec toutes les fixations nécessaires. Certes ce n'est pas en métal mais on l'oubli très vite et c'est vraiment solide. On peut compter dessus sans crainte.

Nice quality for this polymer rails. All the necessary screws and mounting pieces are included, so you can fix all of the rails if you want !

The only minor issue that I can share is that the longest rail of my package came being a little bit folded. I hope that, once fixed on a handguard, it will get and keep a straigth form.

Rail m Lock standard.
La description est conforme à ce que j ai reçu.
Avantage du lot étant de pouvoir utiliser pour d autres répliques.
Pas grand chose à en dire. Sinon que la clé de serrage n est pas fourni mais en dehors de ce détail, ras

Les rails sont de bonne qualité se fixe facilement une fois qu'on a le coup de main.
Les longueurs sont bien choisi parmi lesquelles vous pourrez facilement trouver ce que vous recherchez pour placer une lampe ou poignée. je le recommande sans problème.

There is a problem with the green gas Intake it's to deep down so you have to buy a extension for this. Aside from that it's a fun weapon. Not the most practical because of the shell eject but fun not the less.

Great polymer rail set.
Good grip on my handguard.
I used them to attach a canted sight and a flashlight on my M4.
The larger sections seem to be strong enough to attach vertical/angled grips as well.

1. Build Quality and Materials
Material: The rail set is crafted from durable polymer, which provides a lightweight yet sturdy construction. The polymer feels robust and resistant to general wear, making it a good choice for both casual and intensive airsoft use.
Finish: The matte black finish is clean, non-reflective, and blends seamlessly with most airsoft rifle setups. It adds to the tactical appearance without feeling overly bulky.
2. Compatibility
Mounting System: Designed for both KeyMod and M-LOK systems, this rail set offers great versatility. It fits securely on a wide variety of rifles and ensures minimal wobble during gameplay.
Ease of Installation: Installing the rails is straightforward, thanks to the precise cutouts and included screws. However, it’s worth noting if the installation process requires specific tools or adjustments for a snug fit.
3. Performance
Sturdiness: Despite being polymer, the rail handles attachments like foregrips, flashlights, and lasers without noticeable flexing. It is more than capable of holding up during rigorous skirmishes.
Weight: The lightweight design ensures it doesn’t add unnecessary heft to your rifle, keeping the setup balanced and agile, especially for CQB scenarios.
Heat Resistance: The rail set remains cool to the touch even during extended play, which is a bonus for high-rate-of-fire replicas.
4. Design and Aesthetics
Modularity: The KeyMod and M-LOK compatibility allows for flexible attachment points, so you can easily customize your loadout with accessories where you need them most.
Looks: Sleek and minimalist, it enhances the rifle’s aesthetics without overpowering it.
5. Price and Value
Affordability: This rail set is competitively priced, offering excellent value for airsofters looking for reliable and cost-effective gear.
Comparison: Compared to metal alternatives, it’s a fraction of the cost and weight, though it may not be as durable under extreme physical stress.
6. Pros and Cons
Pros:

Lightweight and durable polymer construction.
Compatible with both KeyMod and M-LOK systems.
Easy to install and versatile for attachments.
Affordable price point.
Cons:

Polymer might not withstand extreme impacts like metal alternatives.
Limited heat resistance for heavy, sustained use with high-powered replicas.
7. Final Verdict
The KeyMod/MLOCK Polymer Rail Set - Black [MP] is an excellent choice for airsofters seeking a lightweight, functional, and budget-friendly rail system. It strikes a balance between performance and affordability, making it a solid addition to most setups.

For it's low price, the material quality is great! This is a very good option to consider if you are looking for MLOCK rails. The fact they are polymer shouldn't have to discourage you, they are very solid.

Would also recommend!
Jan

Nagyon jó a minőség egyáltalán nem mozog a fegyveren. Nagyon stabilan rá lehet szerelni bármit. Biztos hogy nem fog leesni róla semmi. Nagyon ajánlom mindenkinek nagyon jó ár érték arány. Nagyon gyors a szállítás négy nap alatt ideért.

This set of rails gives double possibilities. The can be used not only for mounting tactical lamps/grips/mounts/etc but also useable for give better protection against unwanted scratches/injuries on your weapon! As they are made of plastic, the weight of a weapon increasing only few grams. Otherwise, the overall quality is very good, I recommend to buy them ;)

I recently acquired an MLOK polymer rail set for my airsoft rifle, and I'm pretty pleased with the purchase. The built quality is surprisingly good; these rails feel robust and dependable. They're designed with attention to detail and have a nice tactile feel, which enhances the overall handling of my rifle.

However, I did encounter a minor issue during installation – they were a bit tricky to fit onto the MLOK system. It required some extra effort and patience to get them securely in place. While it caused a slight inconvenience, it wasn't a deal-breaker, and once they were properly attached, they stayed firmly in position.

Despite the initial fitting challenge, these MLOK polymer rails have significantly improved the functionality of my airsoft rifle. They provide extra versatility for adding accessories and attachments, which has enhanced my gameplay experience. Considering the built quality and the value they bring to my setup, I'd say it's a worthwhile purchase. Four stars!

Good product. Made out of a very strong and high quality polymer which doesn't weigh your gun down a lot.

Comes with a bag of screws et cetera to attach it to your gun. Works perfectly for an MLOK system, like on my CYMA 041H. So far, all accessories fit fine.

wellmade, cheap, professional, strong materials
I have never been disappointed in them.
I highly recommend it to everyone who wants a good additional rail system whether he is a beginner player or advanced one.
Thank you so much!

They're picatinny rails. That's it. They're sturdy enough to not be crap, and they're the right size. It's really hard to mess something like this up. They stay on good, and what you put on it stays on it even gooder, I guess.

Rien n'est parfait, je crois pas que cela soit compatible a 100% avec la gamme de réplique en ma possession, car j'ai du attacher avec des colsons pour éviter qu'il se détache.
Je ferais un test sur une autre marque :)

Bought some M-lok rails on here. Airsoft gear in my country is so over priced and isn’t the best quality. Taiwangun sells trusted brands and better brands for cheaper.
Honestly very happy with the product I received the rails where around 10.40€ and there high quality Plastic along side good fit and great price ( rails included 5 different sizes of rails )

The Keymod and M-LOK attachment systems are compatible with a wide range of accessories, such as scopes, lights, and grips, allowing for customization of the weapon to suit individual preferences and playstyles. This versatility makes the rail set an excellent choice for both airsoft and real steel applications.

They are rails that attach to keymod. Nothing fancy but they do their job and feel quite sturdy. The assortment of different length is useful thought for me personally the longer ones really aren't necessary.

I like the variety of the rail set. it gave me a lot of options and ways to set up my replicas, ranging from a small rail for a flashlight to the big one to attach a grenade launcher.
You have an option for each situation/mount/replica.
The plastic feels sturdy and doesnt bend. the installation was quick and easy. The rails have a keymode profile underneat that help with the precise alligement. I used one rail for a replica with MLOCK handguard but for this I cut the small profiles of. This did't affect the placement or the aligement of the rails.
The screws ,mounting pieces and a hex key are included in the packaging. No other tools needed.

The dimensions of the rails are perfect and there is no play/wobble, neither between the rails and the replica of between rails and attachements. I've used grips, sights, flashlights, pea and even grenade launcher on it without any problems.

All in all I would recomend this keymod/mlock polymer rail set. It is cheap and durable and certainly give you a bang for your buck

A sturdy set of rails. Not much to say here. Plastic, but it feels it will last for long. Would be better if there were pairs of the same length in the package, because you have to buy 2 of the set if you wish to put them symmetrically on your replica. But at least it is cheap enough, so it won't hurt your purse and you will have lots of options.