[Ensemble] Replica DMR E6902M - Black [Golden Eagle] + Chargeur de batterie V3+ pour batteries LiPo/LiFe [IPower] + Batterie Li-Po 2200mAh 11,1V 20...

Ce chargeur fait le minimum mais le fait bien. La diode de gauche est verte quand le chargeur est branché sur le secteur, celle de droite est rouge quand la batterie est en charge et devient verte quand c'est terminé. Rien de plus, pas d'écran, pas d'indication du pourcentage de charge de la batterie mais vu le prix il ne faut pas s'attendre à plus. À voir dans le temps.

Chargeur compact et rapide.possibilité de brancher deux batteries en même temps. Petit prix. Satisfait de mon achat

Très bon produit de très bonne qualité pour le prix je suis très satisfait de cette achat que je recommande fortement, possibilité de recharger plusieurs types de batterie LiPO/Li-ion . La qualité du produit par rapport aux prix sans parler de la livraison rapide et le produit très bien emballé , je recommande fortement.

Pas de problème pour le moment, conventionnel, semble charger assez rapidement les batteries. Testé sur du 8,4v et 11,1v. n’oubliez pas d’acheter une petite pochette de protection pour batterie. Le câble secteur est fourni avec

Nickel rien à redire tape fort et tiens toute la journée en semi. Depuis 7h jusqu'à 17h assez compact sa conviens pas pour une evo 3a1 par trop épaisse. Rentre facilement dans les boîtes de rangement de baterie et ne chauffe pas le câble

Chargeur compact qui me permet de recharger ma 7.4 en Deans, les leds sont super utiles, et la charge est rapide. Malgré la grande capacité de ma batterie (2200mah), il a fallu 1-2h pour la recharger entièrement, je recommande chaudement.

Le manuel d'utilisation est clair, ce produit fonctionne parfaitement bien et est tout à fait silencieux. Il permet de charger des lipo ou des life de tout type et s'arrête de changer quand ce n'est plus nécessaire.

Well, what can I say about this charger?
It's perfect for any batteries you have, althought for specific batteries voltage (check the techical data or lower in description). And to charger my battery, it tooked like 1.30 or 2 hours

This charger is simple to use and works perfectly. The charging indicators are clear, and it charges my batteries safely and efficiently every time. It's compact enough to take with me to games and gives me confidence that my batteries are being charged correctly. Excellent product for anyone looking for a dependable charger.

Does the job it is designed to do.
Light indicators are a great way to track if the battery is full.
Cord is a bit short.
I recommend buying a charging bag with a charger.
Design is not great but you are probably not buying this for its design.

Not much to be said here only that it charges. the led to let you know its fully charged is nice. The charger is made for EU wall sockets so if you live in a country with different sockets be prepared to buy an adapter which is only €2

Claims all my batteries are charged despite them being one being 22%, another 70% and only one at 86%.
Maybe the one I have is defective, but it has charged the one that is at 22% to a full state multiple times in the past

Really glad I got this charger! It makes charging my LiPo batteries super simple and worry-free. The lights let me know exactly when the battery is ready to go, and it charges pretty fast too. A must-have tool to keep your gun running all day!

I bought this battery for my primary AEG and after several game days I’m really happy with the performance. The 2200mAh capacity easily lasts through a full day of playing without needing to swap batteries, which is a huge advantage during longer outdoor events. Trigger response feels fast and consistent with the 11.1V setup, especially on semi-auto. I was also surprised that the battery stays relatively cool even after heavy use. The build quality feels reliable and the wiring looks much better than on some cheaper Li-Pos I used before. It fits perfectly in my crane stock and delivers stable performance the entire time. Overall, a very dependable battery with excellent value for money.

Chargers came with a solid cardboard box and with a power cord. Very easy to use and charges batteries very fast.
Used it 2 times so far, I’m okay with the product.
Would recommend for any beginner.
Only downside is that it’s not capable of taking the batteries to “storage” mode. Other than that it’s good!

An essential tool if you are switching to Li-Po batteries. It's very simple to use: just plug it in and wait for the LEDs to turn green. It feels safe, doesn't overheat, and the compact size makes it easy to throw in your gear bag.

The charger make what he can! I used twice until when i buy that. I tink this is a good product for this price! The charging time is common. I recommend it to beginner players who dont want to invest a lot of money in the game at the beginning.

Upon having this DMR for over a year and using it as my primary replica, I decided to rewrite my first review, but as I can not do that, I'm writing a second review.
Standard V2.5 gearbox does not fit without sanding inside of the lower receiver and drilling a new hole for the main back pin in the gearbox.
Lower receiver body is of very soft metal, fire selector is awful, stock wobbles more than on most of AR replicas, but the front part of the stock is somehow so tight so you can't fit electrical tape or velcro tape to the buffer tube to stop wobbling. Stock is large and can take almost any butterfly battery, yet is made in a dumb way so you'll have a problem with wires. Mine also disassembled on its own since the glue break which is holding plastic part which has an adapter for rubber back pad.
Pin on the dust cover doesn't do s**t and it's made of the cheapest plastic.
Magwell on the rear side has groowes so you can not fit a vecro tape when plastic on mags gets worn of. Of course my mags stopped feeding, I've managed to solve it by using maxx 2nd gen chamber (1st gen also had feeding problems on this replica, haven't tried 3rd gen) and putting few layers of duck tape from trigger guard to the magwell. Looks ugly, but it managed to push the magazine a bit to the front so it feed more or less properly.
Motor is useless so ht motor is a must. Screw threads are plastic in pistol grip, of course one of them worn off.
front rail is nice and heavy, but slightly larger than normal picatiny rail so naturally some grips and other attachments don't fit.
Outer barrel developed a wobble which is obviously a big no-no for any replica, especially DMR, I found some thick rubber pad, cut it so it fits inside the rail and use it as stabilizer.
As I mention before, selector switch is horrible. Gears for right selector are bad and give that cheap filing when using it, also barely noticeable click after some time so I replaced the spring inside selector switch and changed pin to a ball, I also deepened the holes on lower receiver for more noticeable click.
Gears are s**t, very loud with that wining sound, but you cant change them because mosfet works in combination with magnet on the gears. Also you can't change the mosfet because selector switch is propriatery and works specificaly with that mosfet. Not sure if different selector switch would work or fit. I managed to pull out the magnet somehow and put it in a spare sector gear which helped a bit with the sound.
Also, spring guide does not have a ball bearing.
Upon assembling the replica its very important the way in which you assemble it, otherwise nozzle won't be align with the hop up chamber since gearbox and body don't fit snugly as in some other replicas. Assemble it like this: Back pin, trigger pin, fire selectors, buffer tube and finaly pistol grip.
I drilled holes in gearbox for 2 more additional screws in pistol grip since with attachments my replica is 5.5 kg, and only 2 screws holding the pistol grip is too few for such a heavy replica.

Final verdict:
Does it work well? After many upgrades yes, I've had hits in game at 90 m with 2.3 j and 0.43 g bbs.
Would I buy it again? NO! That middle (recce) model I like the best in terms of looks, however considering the (very) low quality I would go with 417 assault E&C replica instead.

Ez egy nagyon jó kis töltö teszi a dolgát. Aránylag gyorsan is tölt. Jó a minősége söt nem is kerül sok pénzbe ez a töltö! én azt mondom ha bárkinek kell valami olcsó és jó akkor ezt a tőltöt ajánlom. Én teljesen meg vagyok vele elégedve nekem nincs vele semmi gondom teszi azt amit kel neki. Csak ajánlani tudom!

Works perfectly. Very simple charger - you just connect the battery and it charges.

Be mindful to have the bottom switch in the proper position for charging your battery!

I also advise getting a proper measurement device to check the status of your batteries. You can do that with a multimeter, but a dedicated device is about 5 Euros so do not cheap out on it. The charger does NOT show you any info!

Works as intended, fast charges my batteries, never had any trouble at least for now. Build quality is not too high but that is to be expected for a product that costs less than 15 euros. All in all I consider this a good purchase

Jg or Golden Eagle replicas generally have a decent quality and some proprietary parts of body as well as internals. E6902M is no different. Gearbox is V2.5 by dimensions, however it has a proprietary cylinder head which in total length is 11 mm longer than standard cylinder heads so the cylinder is a standard V2. Airseal is decent, although for a more serious dmr role I definitely recommend nozzle with better airseal (preferably with an o ring). Piston does not have metal teeth so that would be also a needed upgrade. It's incredibly easy to lock it to semi-only: just sand a part of tappet plate which engages microswitch on the left (back) side of gearbox. Problem with my replica is factory shimming, it was to tight and gears have not moved freely as they should so I recommend paying few euros extra for taiwangun service of relubricating and reshimming if you are not comfortable doing it yourself. Also V2.5 is easy to install instead of factory gearbox. Gearbox does have a quick spring change, however lower reciever construction makes it imposible with out removing gearbox from the replica. Motor does not have a nedymium magnets.
Does not have a working bolt catch and as usual with almost all AR-based replicas, stock is a little wobbly.
Body quality is superb.
With normal V2.5 gearbox and decent shimming it would easily pass for 5/5 stars.

it is a really good charger it charges the batteries really fast and it doesn't destroy them, i like it very much, it is cheap and good of course you have to watch it and don't overcharge the batteries but that's the case with all of the others. I recommend it because it is cheap and reliable

I got what I expected, a cheap plastic charger.
It is very light and hollow inside.
It's not terrible but it's not good charger.
This is a cheap charger and I got what I expected. The charger is made of plastic and is hollow. I recommend it to people who don't want to use the battery for games.

Great and cheap! So fricking fast! I was so surprised :D It only took like 1 hour? idk, but it was fast. Greatly recommend this product! And of course Taiwan gun ships very fast. only took 2 days :) very happy, thank you Taiwan gun.

I ordered 2 of these and i love it. The battery is small but poverfull, so that is awsome for lots of different rifles. I use them in SMG and AR, and becouse they are small i dont have any problems fitting them into my guns.

The first impression out of the box is that it is a cheap product. And it really is.
The charger is made out of the cheap plastic, it's very light, hollow, and something rattles inside the case.

I wouldn't mind any of the previously mentioned stuff if it worked fine, but for me, it doesn't. Charging was fine for the first few times, but after that the same thing happened as mentioned in the previous review. You plug in the battery, and it never charges completely, the LED is red all the time. I tried it with three different batteries, and it's the same case with all three (another charger charges them without any problem).

As with other cheap Chinese products, the price is very good, and it might work just fine for you, but there is a real chance it will not, and I don't think it's worth a risk. Better quality chargers are available for not much higher price.

Stoped working after first two times. ;( Also hapened to my friend.
Maybe tehere is some factory defect, i was charging, usual lipo stick bateries.
Indiciator shows empty all the time.
Hope to hawe some answer from you guys, also wrote at e mail.

This item is simply amazing, I was very happy when I bought it. I thought it wouldn't fit or I wouldn't like it, but everything turned out very well. I really regret not buying it earlier. Now I always like this thing and I will never leave it. At this price, it is very, very worth buying, believe me, it will really fit you and you will like it. I highly recommend you buy it, and buy it as early as possible before others buy it, because it won't be available. Buy as early as possible, because mine and your last airsoft game will be simply the best, believe me!!!

Truly a great battery charger for the price! But expect some "cons"...

The charger came in a generic carton box, the unboxing experience was really basic, but for the price it's not an issue. Included in the box was the charger, the 2 pin EU cable and instructions.

The Charger itself is made out of what seems to be an injection molded black satinated ABS plastic shell with on top 2 output LEDs, air vents for heat dissipation and a vynil sticker with the name of the charger. On the front side there are 2 ports, a three pin and a four pin one, on the back side there's the AC 110-240V cable port. On the back of the device there are 4 silicon rubber feet, the VERY IMPORTANT MICRO SWITCH that is used to select which type of battery you're charging and a vynil sticker with the informations of the device. The cable is decent quality too.

The IPOWER V3+ Battery Charger has 800mAh max charge current, meaning the microcontroller will manage the charging of the battery cells accordingly to their current level of charge. It will then deliver the right amount of current ranging from a few mAh to a maximum of 800 mAh. This means more battery life but also that the true average charging current is less than 800mAh, just keep that in mind! The charger supports 2/3 cell batteries and can charge only one at time.

The power LED is green and always stays on when the device is connected to AC. The status LED on the other hand has different color codes (Red, Red blinking and Green), meaning the microcontroller is somewhat enough intelligent to detect malfunctions and stop charging to prevent damage and tell you what's going on. In general the charger is not too noisy and the heat dissipation is enough.

But then, where are all the cons? For the price that's surely a bargain, but still...

The charger is poorly built. The plastic shell is decent quality but the charger really feels "light and empty" with very small internal support. That said, if you plan to take it with you it's surely better if you protect it or it could easily break.

Another thing that makes me "wonder why" is that the switch is under the device, meaning you can't easily see it. If it accidentally changes position it could be very painful for your battery... Be careful and always double-check it before charging!

In addition, if lightly shaked my unit sometimes emits a clicky noise (like there's something free moving inside) and have a misplaced rubber foot that is surely going to detach soon. Not to talk about the fact that the cable is just slightly bigger thant the port, so to attach it you really have to push or it won't go. But still, after pushinf it with some force the device managed to charge my battery in just a few hours without any problems!

Overall this truly is a 4 star charger. But that doesn't mean you shouldn't get it! For the price I don't think you could expect or want more, for some people in fact the important thing is just the internal hardware... And it seems like that the IPOWER V3+ decided to put all the budget for the electronics inside, which could be all you need if you want to buy a cheap charger that gets the job done and has a good microcontroller. Tho i wouldn't reccomend it too much if you travel much! Anyway i'm very happy with it as i am the first kind of person ;)

Good product in case of price and quality. I can't say anything special or critical. The batteries are charging properly, there are no breakdowns or problems. If you are saving money and need a stable and efficient lipo battery charger, then you can buy this product without doubts. Moreover, the Taiwangun shop has not yet disappointed with its products and this charger is suitable for both beginners and advanced players with a limited budget.

I've only used the charger once and it seemed to work fine, but the cable it came with did not fit the charger, meaning that the plastic was too thick. I fortunately had the necessary cable, but I am quite disappointed that the cable provided did not work.

V3+ CHARGER FOR LIPO/LIFE 2S/3S
A good balanced charger. Charges the battery in about an hour and has a good light indication when charging and reaching full battery capacity. I use to charge a battery type BATTERY LI-PO 1300MAH 7.4V 20/40C

Ein gutes ladegerät um den preis ist preisleistung top. Hab mir gleich paar akkus auch bestellt damit ich alles auf Lager hab. Nach einigen stunden laden wir es bisschen warm aber werden andere Ladegeräte auch villt bin ich da zu sensibel.

Perfect price-quality ratio. Easy to use it, good "how to use" manual for it. Fast charging, I use with 1800mh accumulators. Made from normal quality plastic material.

Charges up the batteries in good time. Works as intended.
The power cable could be a little bit longer since its a little short i have to run an extension so i can charge my batteries safelly on the table

Very good charger. Had no trouble so far. Very clear instructions on how to use. Charges very well and very fast. Very compact, so you can take it anywhere you go to. Charges LiPo and LiFe, so that comes in handy.

V3+ Charger for LiPo/LiFe 2S/3S . Well nothing much to say pretty decent charger. It server purpose. You have led indicator for charging and charged battery. It's really small and compact, doesn't heat up when charging batteries.

Bought one and used it for charging the "Battery Li-Po 1450mAh 7.4V 20C".
Works like it should be.
When the battery is charged it will show a green light. charging won't costs that long of a time and it's balanced.
Price/quality is worth it!

I bought one of them. Simple and fit for purpose, this is my first charger. I'm charging him a 1450 battery. It will charge in about an hour. I haven't noticed any bugs yet. If it lasts a long time, I’ll definitely buy one or even more of it.