[Ensemble] R901 - Black [Army Armament] + Batterie Li-Po 1100mAh 7,4V 20C [IPower] + Chargeur de batterie V3+ pour batteries LiPo/LiFe [IPower]

Ce chargeur fait le minimum mais le fait bien. La diode de gauche est verte quand le chargeur est branché sur le secteur, celle de droite est rouge quand la batterie est en charge et devient verte quand c'est terminé. Rien de plus, pas d'écran, pas d'indication du pourcentage de charge de la batterie mais vu le prix il ne faut pas s'attendre à plus. À voir dans le temps.

Chargeur compact et rapide.possibilité de brancher deux batteries en même temps. Petit prix. Satisfait de mon achat

Très bon produit de très bonne qualité pour le prix je suis très satisfait de cette achat que je recommande fortement, possibilité de recharger plusieurs types de batterie LiPO/Li-ion . La qualité du produit par rapport aux prix sans parler de la livraison rapide et le produit très bien emballé , je recommande fortement.

Pas de problème pour le moment, conventionnel, semble charger assez rapidement les batteries. Testé sur du 8,4v et 11,1v. n’oubliez pas d’acheter une petite pochette de protection pour batterie. Le câble secteur est fourni avec

Très bonne batterie, attention celle ci convient très bien aux répliques type M4 ou AR15.

Pour les français il s'agit d'une erreur de traduction si vous voyez que dans la description elle est incompatible aux AEG.

Alors il y a beaucoup de choses à dire sur cette réplique, beaucoup de bonnes choses surtout ... :)
Tout d'abord laissez moi vous dire que cette AUG équipée d'une petite lunette et d'un silencieux est magnifique. Son canon long et ses "courbes" fines lui donnent presque un aspect de fusil de précision.

La réplique en elle-même est de bonne qualité, le corps est en ABS ou polymère solide, tout le reste est en métal, ce qui donne une réplique tout de même assez lourde, ce qui lui ajoute une touche de réalisme. Ajouté à cela une extrémité de crosse en caoutchouc pour plus de confort.

La réplique est efficace, assez puissante, très précise (mais ce n'est guère étonnant pour du Army Armement). La possibilité d'effectuer du tir au coup par coup et automatique en fonction de la pression de la détente est très sympathique. (Légère pression = semi / pleine pression = auto)

Hop-up réglable en tirant la culasse. (Fenêtre d'ejection) Enormément de rails sur la réplique, ce qui laisse le choix en termes d'accessoires. Frein de bouche dévissable pour y ajouter à un silencieux ou autre extension de canon

Les défauts :
- ATTENTION, la batterie et le chargeur de batterie ne sont pas fournis avec la réplique, il faut donc bien penser à en acheter à côté (une 7.4V,ou plus, de 10cm de long mais pas trop plus pour qu'elle puisse rentrer dans la crosse)
- Réplique un peu lourde, c'est réaliste certes, mais lors d'une longue partie par exemple ça peut fatiguer.
-mini clé allen requise pour pouvoir déviser le frein de bouche
-Poignée avant peut être un peu fragile. Elle est fixée par une tige en métal mais cette dernière est assez fine... un gros choc pourrais peu etre la faire lacher.

Chargeur compact qui me permet de recharger ma 7.4 en Deans, les leds sont super utiles, et la charge est rapide. Malgré la grande capacité de ma batterie (2200mah), il a fallu 1-2h pour la recharger entièrement, je recommande chaudement.

Le manuel d'utilisation est clair, ce produit fonctionne parfaitement bien et est tout à fait silencieux. Il permet de charger des lipo ou des life de tout type et s'arrête de changer quand ce n'est plus nécessaire.

Well, what can I say about this charger?
It's perfect for any batteries you have, althought for specific batteries voltage (check the techical data or lower in description). And to charger my battery, it tooked like 1.30 or 2 hours

This charger is simple to use and works perfectly. The charging indicators are clear, and it charges my batteries safely and efficiently every time. It's compact enough to take with me to games and gives me confidence that my batteries are being charged correctly. Excellent product for anyone looking for a dependable charger.

Does the job it is designed to do.
Light indicators are a great way to track if the battery is full.
Cord is a bit short.
I recommend buying a charging bag with a charger.
Design is not great but you are probably not buying this for its design.

Not much to be said here only that it charges. the led to let you know its fully charged is nice. The charger is made for EU wall sockets so if you live in a country with different sockets be prepared to buy an adapter which is only €2

Claims all my batteries are charged despite them being one being 22%, another 70% and only one at 86%.
Maybe the one I have is defective, but it has charged the one that is at 22% to a full state multiple times in the past

Really glad I got this charger! It makes charging my LiPo batteries super simple and worry-free. The lights let me know exactly when the battery is ready to go, and it charges pretty fast too. A must-have tool to keep your gun running all day!

Chargers came with a solid cardboard box and with a power cord. Very easy to use and charges batteries very fast.
Used it 2 times so far, I’m okay with the product.
Would recommend for any beginner.
Only downside is that it’s not capable of taking the batteries to “storage” mode. Other than that it’s good!

An essential tool if you are switching to Li-Po batteries. It's very simple to use: just plug it in and wait for the LEDs to turn green. It feels safe, doesn't overheat, and the compact size makes it easy to throw in your gear bag.

The charger make what he can! I used twice until when i buy that. I tink this is a good product for this price! The charging time is common. I recommend it to beginner players who dont want to invest a lot of money in the game at the beginning.

Great gun for an even better platform. For the price it's what you'd expect, it's nothing fancy but it does the job and it does it well. There are some parts which could be better (foregrip, ejection port cover, muzzle) but I love using it.

Very good looking, shoots awesome , awesome price , overall great choice for weapon! Would recommend this to anyone , starter or advanced. Had great fun with it so far , and plan on upgrading it aswell.

the gun itself had no problems at all, it felt good in the hands and was comfortabel in the hands. If you're looking for a reliable and fun airsoft gun that won't break the bank, this is definitely worth considering!

Great replica price wise
If your starting your Airsoft journey
It’s light easy to practice tech work on because of the easy take down body wise Maby only change the bucking and get the reshim service from Taiwangun and your set to play love it

Ez egy nagyon jó kis töltö teszi a dolgát. Aránylag gyorsan is tölt. Jó a minősége söt nem is kerül sok pénzbe ez a töltö! én azt mondom ha bárkinek kell valami olcsó és jó akkor ezt a tőltöt ajánlom. Én teljesen meg vagyok vele elégedve nekem nincs vele semmi gondom teszi azt amit kel neki. Csak ajánlani tudom!

Works perfectly. Very simple charger - you just connect the battery and it charges.

Be mindful to have the bottom switch in the proper position for charging your battery!

I also advise getting a proper measurement device to check the status of your batteries. You can do that with a multimeter, but a dedicated device is about 5 Euros so do not cheap out on it. The charger does NOT show you any info!

This product is quite good and strong 0.28BB can do around 400 fps and is quite reliable. However, the replica has one problem and that is the low-quality basic hop up system, this can be easily remedied by installing a cnc hop up. Apart from that, I have had no negative experience with the replica, even though I have been using it for 1 year

Works as intended, fast charges my batteries, never had any trouble at least for now. Build quality is not too high but that is to be expected for a product that costs less than 15 euros. All in all I consider this a good purchase

Other than feeding problem with standard magazine, the gun looks and shoots great. The battery compartment is small, so it might be tricky to find a proper battery. Being able to disassemble the gun in like 40 seconds is a big +
For the price, the gun is great!

This is a pretty nice entry level replica that also has its downsides.

For this price it shoots really well out of the box, with a bit of hop adjustment, I could hit targets relieably at 50m.

This is a long replica, out of 820mm length 520mm is the barell, thanks to this it has really good accuarcy as I stated above.

The downside is that in case you want to get a new inner barell, that will be very expensive. As of writing this rewiew there are no 520mm long inner barells of any materials available at Taiwangun.

While i had no problems with the barell shooting wise, the hop-up unit on this replica is terrible. While you can get really nice hop with it, it wont keep that level of hop for long, a bit of running, shaking, even firing will casue it to loose hop gradually. Of course you can set it again any time, but the window to the hop unit is really small, so you will struggle to adjust hop if you are vearing gloves. The hop-up unit also falls apart easily thanks to the twist on securing ring on the back. 4 out of 5 times when i took out the barell during disassembling the hop up unit fell apart. You can put it back together with little problem, but it can become a real headache if you accidentaly loose part of it. To sum it up get a new hop up, the stock one is bad, my one is yet to arrive, i will update my rewiew once I tried it.

This replica is heavy. Loaded, it weighs around 3500g wich is pretty close to the original one. One really nice thing is the center of mass, it isnt back heavy, most of the weight is located at the middle, making handlign a lot more comfortable. It also comes with two sling mounts stock, but the back one cant be reconfigured to be on the right side. The two holes on the side of the replica are of two different size, I have no idea why it was made this way, and this is an issue I am yet to resolve. Other than that I had no issues with the sling mounts.
The replica is also pertty long, not well suited for CQB. I also wouldn’t recommend it for speedsoft, since you will be at a disadvantage carrying that extra weight. I tried both CQB and outdoors combat with it, outdoors is the place where it really shines since you can utilize your range better.

It comes with a built in foregrip that has two settings: up and down. I used mostly the up position, because in the down position there is a significant whobble. In the up position it sits really firm. There is a slight whobble between the barell and the upper reciver, but that is most likely the result of the quick disassembly function. This qiuck disassembly comes is really useful in case you get a jam.

The outer barell and the upper reciver is made out of aluminium, the stock and body is built of ABS plastic, and the inner barell is copper, the hop up unit is plastic. The paint on the outer barell seem to chip off easily, not really a problem if you are aiming for a battle beaten look. The body on the other hand can be problematic. ABS can get quite brittle in cold weather, so try not to drop it or fall with it. It also rattles significantly. The main source of the rattling comes from the foregrip and the trigger mechanism. If you apply some gun grease on the spring inside the foregrip and on the trigger mechanism, you can reduce the rattling significantly. I also applied some grease on the moving parts of the trigger mechanism, and the slides of the reciver to reduce wear over time.

The performance of this replica depends a lot on the battery voltage. While 7.4 V is the recommended voltage, the gun feels sluggish using that. Using 11.1 V LiPo-s I got a really nice trigger response in semi auto and a reasonably good fire rate in full auto. Keep in mind that this will make the gearbox wear out quicker. The mini Tamiya connectors that this replica comes with are considered outdated nowdays, but i didn’t have issues with it so far. An important thing to keep in mind is that this replica does not come with any adaptors, so you will either have to get them separetely or get batteries with mini Tamiya connectors. The battery compartment is located in the stock of the replica, and is fairly small. 11.1 V 1100mAh LiPo-s fit in there nicely, but i wouldn’t go much bigger. Keep this in mind when selecting a battery. The battery compartment can be acsessed by taking of the rubbber butt plate. If you have weak nails I recommend keeping a flat head screwdriwer nearby because it can get tricky getting of the buttplate. In this compartment you will also see the mosfet and a 30 Amp fuse.

The buttstock of this replica is non adjustable. This can cause issues with ergonomics if you have shorter arms. I personally had no issues with ergonomics, but my friends (with shorter arms) said that it was uncomfortable using it. The replica is advertised as fully ambidextrous, the ejection port/hopup window can be freely reconfigured, but the sling can’t be for the upper mentioned reasons.

The replica comes with no iron sights stock, you will need to get a red dot or a scope separately, since there is no reason to get iron sights. The top rail is long enough for you to mount any kind of optic and a protector, but is not a picatiny rail, the grooves are further away from each other. I did not have any issues with it, but in case you do you can swap it freely, beacause it is secured by two screws to the upper reciver and is not cast as one piece. The side rails are plentyful, this time all of them are picantiny. Sadly there is no under barell rail, so you can’t mount a different foregrip.

The stock Hi-cap magazine that comes with this gun is flimsy. I could already see some cracks in it, and feeding wasn’t perfect with it. The only upside to this mag is that its see trough, so you can easily see how much BBs you have left. I got a pack of four mid-cap see trough waffle mags here from Taiwangun ( https://www.taiwangun.com/midcap-magazine-aeg/170rd-aug-magazines-box-of-4 ). These ones are really sturdy and seat perfectly, there is absolutely zero whobble, but you can insert them in a way that they will lock but wont feed. You can see this as a misalignment so it is easy to overcome. The only issue can be with reloading, since they sit so tightly in the gun, it can be difficult realoding at first. The replica always fires a blank shot after reloadning, I experienced it every time. When reloading a couple BBs fall out of the gun, but they can get caught up in the mag chamber. Be sure to always shake these out before inserting a fresh mag, because they can wander around the body of the gun. I got 2 in the grip and one in the buttstock. Getting them out is not really problematic: remove the barell + upper reciver, turn the rest upside down, shake it until the BBs get down, then roll them out. Other than the rattle these stray BBs caused no other problems. The mag release is located on the bottom behind the mag, it’s placement is really convenient, you can’t accidentally release a mag.

The replica has a two stage trigger, it can be very useful, but if you are inexperienced using it properly is difficult. On this replica the difference between the two stages are minimal, it is really easy to accidentally pull a full auto itn the heat of a game. My solution to the problem was getting a three sate trigger instead of the stock two state one. This way you can have a semi only setting and a full auto setting where you can still fire semi auto if you want to. This is especially useful at fields that have a semi only fire rule at some specific places (like indoors). I like to use the semi for CQB and the full auto setting for longer ranges. You can get this fire selector online or you can 3D prit it(as it is a tiny piece of plastic) as I did. The fire selector is purely mechanical, it mechanically stops the trigger from being pulled back. When changing or taking out the fire selector be careful not to loose the metal plate that acts as a spring. This also goes for the pin that secures the upper reciver to the body.

Last time playing the gun was chronoed in at 1.22 Joules using 0.32g BBs, zero hop. The replica is built with a V3 hybrid gearbox, this allows for a quick spring change, so in case that is too much for your field you can act quickly. The page writes what kind of spring the replica has, so you can start adjusting from there.

The modular construction is a really nice feature of this replica that enables you to qiuckly customize it. You want to do CQB? Change the barell for a shorter one. You want to use it as a DMR? Mount a scope, mount a semi only fier selector ,change the spring. The possibilities are near endless. you can even swap the upper reciver for an A1 variant with the built in scope. Other manufacturer’s parts are aslo compatible making this even easier.

To summrize it: This is a nice replica for this price, especially if you want to upgrade it in the future and/or you want to get into modifying replicas. It shoots accurrately out of the box, but with the stock hop up your practical range during a game will be limited to around 30-40 m,but during target practice you cat shoot as far as 60 m. Change the hop up as fast as you can, and dont use the stock mag. If you want a replica that needs little to none maintenance this is not the one for you. Otherwise go get it and have some fun.

it is a really good charger it charges the batteries really fast and it doesn't destroy them, i like it very much, it is cheap and good of course you have to watch it and don't overcharge the batteries but that's the case with all of the others. I recommend it because it is cheap and reliable

I got what I expected, a cheap plastic charger.
It is very light and hollow inside.
It's not terrible but it's not good charger.
This is a cheap charger and I got what I expected. The charger is made of plastic and is hollow. I recommend it to people who don't want to use the battery for games.

Great and cheap! So fricking fast! I was so surprised :D It only took like 1 hour? idk, but it was fast. Greatly recommend this product! And of course Taiwan gun ships very fast. only took 2 days :) very happy, thank you Taiwan gun.

The first impression out of the box is that it is a cheap product. And it really is.
The charger is made out of the cheap plastic, it's very light, hollow, and something rattles inside the case.

I wouldn't mind any of the previously mentioned stuff if it worked fine, but for me, it doesn't. Charging was fine for the first few times, but after that the same thing happened as mentioned in the previous review. You plug in the battery, and it never charges completely, the LED is red all the time. I tried it with three different batteries, and it's the same case with all three (another charger charges them without any problem).

As with other cheap Chinese products, the price is very good, and it might work just fine for you, but there is a real chance it will not, and I don't think it's worth a risk. Better quality chargers are available for not much higher price.

Stoped working after first two times. ;( Also hapened to my friend.
Maybe tehere is some factory defect, i was charging, usual lipo stick bateries.
Indiciator shows empty all the time.
Hope to hawe some answer from you guys, also wrote at e mail.

Big advantage is the replica can be use with both hands another big advantage is the build-in mosfet protect the trigger from burn out
Long inner barrel and many riss for additional tools or other things

This item is simply amazing, I was very happy when I bought it. I thought it wouldn't fit or I wouldn't like it, but everything turned out very well. I really regret not buying it earlier. Now I always like this thing and I will never leave it. At this price, it is very, very worth buying, believe me, it will really fit you and you will like it. I highly recommend you buy it, and buy it as early as possible before others buy it, because it won't be available. Buy as early as possible, because mine and your last airsoft game will be simply the best, believe me!!!

Truly a great battery charger for the price! But expect some "cons"...

The charger came in a generic carton box, the unboxing experience was really basic, but for the price it's not an issue. Included in the box was the charger, the 2 pin EU cable and instructions.

The Charger itself is made out of what seems to be an injection molded black satinated ABS plastic shell with on top 2 output LEDs, air vents for heat dissipation and a vynil sticker with the name of the charger. On the front side there are 2 ports, a three pin and a four pin one, on the back side there's the AC 110-240V cable port. On the back of the device there are 4 silicon rubber feet, the VERY IMPORTANT MICRO SWITCH that is used to select which type of battery you're charging and a vynil sticker with the informations of the device. The cable is decent quality too.

The IPOWER V3+ Battery Charger has 800mAh max charge current, meaning the microcontroller will manage the charging of the battery cells accordingly to their current level of charge. It will then deliver the right amount of current ranging from a few mAh to a maximum of 800 mAh. This means more battery life but also that the true average charging current is less than 800mAh, just keep that in mind! The charger supports 2/3 cell batteries and can charge only one at time.

The power LED is green and always stays on when the device is connected to AC. The status LED on the other hand has different color codes (Red, Red blinking and Green), meaning the microcontroller is somewhat enough intelligent to detect malfunctions and stop charging to prevent damage and tell you what's going on. In general the charger is not too noisy and the heat dissipation is enough.

But then, where are all the cons? For the price that's surely a bargain, but still...

The charger is poorly built. The plastic shell is decent quality but the charger really feels "light and empty" with very small internal support. That said, if you plan to take it with you it's surely better if you protect it or it could easily break.

Another thing that makes me "wonder why" is that the switch is under the device, meaning you can't easily see it. If it accidentally changes position it could be very painful for your battery... Be careful and always double-check it before charging!

In addition, if lightly shaked my unit sometimes emits a clicky noise (like there's something free moving inside) and have a misplaced rubber foot that is surely going to detach soon. Not to talk about the fact that the cable is just slightly bigger thant the port, so to attach it you really have to push or it won't go. But still, after pushinf it with some force the device managed to charge my battery in just a few hours without any problems!

Overall this truly is a 4 star charger. But that doesn't mean you shouldn't get it! For the price I don't think you could expect or want more, for some people in fact the important thing is just the internal hardware... And it seems like that the IPOWER V3+ decided to put all the budget for the electronics inside, which could be all you need if you want to buy a cheap charger that gets the job done and has a good microcontroller. Tho i wouldn't reccomend it too much if you travel much! Anyway i'm very happy with it as i am the first kind of person ;)

Good product in case of price and quality. I can't say anything special or critical. The batteries are charging properly, there are no breakdowns or problems. If you are saving money and need a stable and efficient lipo battery charger, then you can buy this product without doubts. Moreover, the Taiwangun shop has not yet disappointed with its products and this charger is suitable for both beginners and advanced players with a limited budget.

I've only used the charger once and it seemed to work fine, but the cable it came with did not fit the charger, meaning that the plastic was too thick. I fortunately had the necessary cable, but I am quite disappointed that the cable provided did not work.

V3+ CHARGER FOR LIPO/LIFE 2S/3S
A good balanced charger. Charges the battery in about an hour and has a good light indication when charging and reaching full battery capacity. I use to charge a battery type BATTERY LI-PO 1300MAH 7.4V 20/40C

It's been a week since I've got this AUG based replica and must say - it is just great ! With a little praktic I've build a proper reflex to shoot semi with this combi trigger which was anoing me in the very beginning. But to be sure I've modified it a little : Drilled a little hole and made a thread M3 on the trigger's body and put a little bolt . The hole is just in the right distance to assure a semi auto shooting only . If I want to perform full auto I simply unscrewed the little bolt and it's done . Regarding bad feeding : I've noticed that when you insert the magazine slow and gently it doesn't feed at all. But if you slam it a bit faster and harder then the magazine and the port hole fit perfect and the feeding is just great. This jewel is so quiet and vibrations free and I can't stop "waste" my BB's ;-) Thanks to the long barrel I am able to hit human corps target size at 170-180 feet . Overall : Don't think twice . Order now !!!

for the very first time I am buying something different than my favorite M4/M16 platform and to be honest - I am gladly surprised of what is in the box . Never seen so good assembled and fitted replica for these money ! It stays solid in the hands and the feeling is for the real Steyr AUG A2 . The weight of nearly 3,5 kg is very close to the real one and the size is exactly 1 : 1 . Wow ! It's a bit noisier than I was expected, but this is jus a drop in the pot of the realism of this replica . Feeding is not 100% with the stock hi-cap magazine which is common for most of these redicilous systems . With purchasing of bunch of mid-cap magazines the problem with the feeding is gone . Thanks to the long barrel the accuracy out of the box is significant : it shoots like a sniper rifle ! It is a just a great platform for convert it to a DMR . The v.3 gearbox is the right solution and it is way easier to upgrade and repair than the v.2 gearboxes . The stock mosfet makes it li-po ready and it feels great with a 11.1 v battery . don't really like the double function of the trigger which control the fire regime , but with a little practice it comes easy to control . Another great asset is the quick spring exchange option , common for the much expensive replicas. Overall : Don't thing more . Go and get it !!!

If you love the Aug platform like me and want a replica this is your gun. Its perfext for beginners its my firt gun as well. Very eazy to customize alos very easy controls you can learn it fast. Diasassembly is very convenient fastly comes into three parts(barrel,reciever,stock).

Ein gutes ladegerät um den preis ist preisleistung top. Hab mir gleich paar akkus auch bestellt damit ich alles auf Lager hab. Nach einigen stunden laden wir es bisschen warm aber werden andere Ladegeräte auch villt bin ich da zu sensibel.

Perfect price-quality ratio. Easy to use it, good "how to use" manual for it. Fast charging, I use with 1800mh accumulators. Made from normal quality plastic material.

Very nice batery, it has enought capacity to use in a full game, it suits well with a cheap/medium price riffle or smg.
It is reasonably priced at 11 euros, I recomend it if you are not expecting to shoot more than 5000 bbs every game

Charges up the batteries in good time. Works as intended.
The power cable could be a little bit longer since its a little short i have to run an extension so i can charge my batteries safelly on the table

Very good charger. Had no trouble so far. Very clear instructions on how to use. Charges very well and very fast. Very compact, so you can take it anywhere you go to. Charges LiPo and LiFe, so that comes in handy.

V3+ Charger for LiPo/LiFe 2S/3S . Well nothing much to say pretty decent charger. It server purpose. You have led indicator for charging and charged battery. It's really small and compact, doesn't heat up when charging batteries.

Ohh Maaa Gawwd! :D
This gun is really realistic and its total replica of the Real Aug guns. It is really heavy as you can see in the information tab and that really feels real it haves a lot of metal and the plastic its really durable! All my frends and i love that gun, price is also really great!
Please read the info and make sure you buy batteries with it :)

Bought one and used it for charging the "Battery Li-Po 1450mAh 7.4V 20C".
Works like it should be.
When the battery is charged it will show a green light. charging won't costs that long of a time and it's balanced.
Price/quality is worth it!

I bought one of them. Simple and fit for purpose, this is my first charger. I'm charging him a 1450 battery. It will charge in about an hour. I haven't noticed any bugs yet. If it lasts a long time, I’ll definitely buy one or even more of it.