[Ensemble] CM.092 Spike's Tactical Assassin Carbine [EMG] + Chargeur polymere LANCER L5 AWM 300 Blackout mid-cap 190 billes M4/AR15 [EMG]

Great magazine. It feeds very well and can keep up with very high rate of fire. I've been using them with most of my replicas (Cyma and other) and they all work fine. The build quality is excellent and I love that I can see how many bullets I have left

Awesome product,solid and good working!Seems compact and not much heavy.Is a good piece and the price is fantastic!Thank you and I buy again!I bought 4 of them for my replica Noveske N4 and works very well,feeding easy 120-150 bbs

Very nice magazines with nice touch with the painting of bullets.. .. it's also transparent, a detail that I love, and you can see the bb's when you are loading the magazine so you can't reach the maximum point and damage the spring inside.
Very light material.. solid construction

Great mid-cap, really. Looks wise at least.

Does give my poor ICS a severe midcap syndrome, so it’ll need some work to ease the spring and allow it to feed properly. On the other hand it fits snugly in the magwell and it looks stellar.

I did hope for proper sculpted dummy bullets, but it’s just a printed insert. But no one seems to notice.

Caricatori fatti bene, esteticamente poco accattivanti, pescano benissimo e si adattano a tutte le mie repliche pescando fino all'ultimo pallino, anche il prezzo è buono, la capienza dei pallini è di circa 190 bb che lo rendono un prodotto eccezionale.

Very happy with my purchase. Firstly Id like to say that my purchasing experience with Taiwangun was excellent. Lowest price around, even when shipped to the US, and it only took about a week to arrive!

Now for the replica, I have read online about how well the cyma platinum rifles were, so I decided it was time to see for myself. External build quality seems decent enough, the only rattle would be the gas tube. Rifle is surprisingly lightweight, I think this is mostly due to the rail system being skeletonized. No complaints here.
Performance wise, This thing is pretty amazing. It Chrono'd just under the limit of 400 FPS at my local outdoor field. I would say this is probably the best trigger response you can get out of a stock gun, the 13:1 gearset really shines. Range was outstanding, I use 0.32g BB's and I felt is if I outranged most other people on the field, hop was more than sufficient to heavy BB's. I was hitting people at the 200ft mark pretty consistently, and without much issue.
The only negative I experienced with this replica is the factory mosfet was acting a little strange, It didn't seems to like my 11.1v 15c Lipo, it would shoot a few rounds and then trigger the electronic fuse. Once swapping to a 11.1v 25c battery, all of my problems went away. I was able to play a full weekend with no issues.
Overall, I don't think you will be disappointed if you decide to purchase this, especially if you catch it on sale. I would, however, recommend you opt for taiwangun to change the factory mosfet before shipping. Its actually a really good price for what you get. This could save you some headache later down the road because the Cyma Platinum mosfets have a reputation for going out.

The big plus for these mags is, that they are see through.
When full about 180 BB's fit. You don't see all but, in the front are first 30BB's, on the back side you see to about 70 and on top of mag (if it's not inserted into a replica) you're at about 90,100. Fits both my Cyma and Cyma platinum M4 well.

I wanted to buy the original mag for my lancer l15, but it was out of stock, so I got this one, and I can say I'ts decent, but inferior to the original mag that came with my L15 in almost every way, but this one has a transparent top where you can see the bb's. Not a bad mag, but if you can get the 220 rnd mag with the red top.

Fantastic magazine. also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

Fantastic magazine. Also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

With "RetroArms" Hop-Up Chamber this MAG doesn´t fit on Cyma Noveske. It´s imposible to use it, any bbs can´t up to chamber.
That´s the worst part, cause it´s look badass with the replica.

Rifle with a constant and very precise shot thanks to the excellently made precision brass barrel and quality rotary hop up group which give excellent range and precision even from stock, plus with 13:1 gears it has an excellent rof. Great product sold by taiwangun!

100% perfect fit for my EMG noveske N4(with APS gearbox). Had some problems with specna arms mags for my replica but These feed without any problems they look and feel amazing and really complete my Noveske build idea. Definitely works for EMG, APS and Cyma can work for other brands but haven't tested yet.

This is my first polymer m4 mags, they feel amazing!

Solid and firm. No wobble on them. The lancer markings are excellent, and the fake bullets! Oh my, they look freaking awesome :D Really realistic.

My only problem is there is no option to buy black bottom plate ver of the mags!!! But some spray paint can fix that.

They feed great! I've had zero issues with feeding, Loading the is also really easy if you have a speed loader!

Please also read the description of the mags on taiwangun. Midcaps should be treated right :)

Bought this replica in January of 2023. Changed into this one from the Double Eagle M917G UTR45 and the difference in quality is quite well proportional to the price change.

Body is made of aluminium, feels very sturdy and has the expected weight. Handguard is made presumably of the same alloy, since with it being "skeletonised", feels very light but doesn't flex or warp even under pressure. The free floating outer barrel does move when pushed up against, but doesn't rattle, nor does it seem to have bad tolerances etc. Prop gas tube on top of the barrel does lightly rattle when pointed vertically and can be tightened down by a piece of cloth or anything else when disassembling the receivers. Only plastic parts, apart from specific internals, are the pistol grip and stock (not the stock tube, this one is metal).

Internals seem to be well made and fitted, judging by the lack of noise when using the replica and the
good performance. Sounds well shimmed and the bb velocity ranges by only 5 fps, making for consistent shots. Fully automatic fire, using an 11.1V 25C Li-Po battery gives a very nice 25-30 rps (not chronographed but estimated).