[Ensemble] AR15 Lite CQB AT-NY03-CQ [Arcturus] + Chargeur a capacité Variable 30/130 Billes pour M4/M16 - BLACK [Arcturus]

Je l'ai testé avec trois de M4différentes et il n'y a absolument aucun jeu. La compatibilité est excellente. Le système de réglage de la capacité, permettant de passer de 30 à 130 coups, est un point fort. Cependant, il faut avouer que la manipulation pour modifier le nombre de coups n'est pas des plus simples. En effet, il est nécessaire de démonter presque entièrement le chargeur, en retirant la coque, le pin et la partie interne. Cette opération, bien que réalisable, peut s'avérer un peu fastidieuse et nécessiter un certain temps d'adaptation.

Malgré cette petite difficulté, le chargeur reste un produit de qualité.

Chargeur de très bonne qualité et bien solide.
Attention, il ne tiens pas bien sur un G&G, il y a du jeux et le chargeur ne feed pas sans qu'on le tienne par une main en le poussant un peu vers le haut.
C'est quand même jouable en partie.

N’ayant que très peut d’avis et review sur cette réplique, je ne savais pas trop à quoi m’attendre. Et bien je suis très agréablement surpris une très bonne finition et performance bien que le hop up demande une rodage voir un changement de joint. Elle est largement jouable en sortit de boîte, j’adore le garde en métal qui donne une vrai sensation de qualité. Réplique entièrement embodextre, bolt catch réellement fonctionnel ce qui est super pratique pour régler le hop-up.

Accepte les batteries 11.1 sans problème et une super réactivité avec celle ci.
Pour ceux qui est des performances, elle atteint les 40m voir 50m entièrement d’origine en 400fps.
Seul point négatif: -difficile d’enlever la crosse pour accéder au câblage la 1ere fois mais une fois qu’on a comprit le coup ça va tout seul.
- et le bouton de "forward assist" qui est purement décoratif entièrement en plastique collé qui fait un peut cheap.

Dans l’ensemble super réplique pour un prix aussi dérisoire, vaut largement des marques concurrente dont les prix serait 2x plus élevé, que demander de plus ? Je recommande fortement

Title: Excellent Variable Capacity Charger for M4/M16 - A Must-Have for Airsoft Enthusiasts!
Review:
I recently had the opportunity to try out the Mag , and I must say, it's an absolute game-changer for airsoft enthusiasts. This variable capacity charger offers a seamless and convenient solution for feeding ammunition to your M4 or M16 airsoft rifle. i got 8 of them now

Très bon chargeur rapide à utiliser et avec le système de remonté de bille avec ressort (pas de molette pour remonter les billes) très bon produit je recommande vivement cet article qui est très qualitatif.
Seul tout petit inconvénient c’est la capacité mais honnêtement pas vraiment dérangeant.

Fonctionne parfaitement !
Seul petit défaut, on ne voit pas si bien les billes que ça, je pensais que la fente serait un peu plus large, il faudra prendre un point de vue perpendiculaire au chargeur pour bien voir si il reste des billes

Top se réglage en un clic pour du low cap , top aussi le bon mid cap . Le démontage est facile et idéal pour la maintenance .
Le chargeur est compatible avec d'autres répliques ar15 . Il semble aussi très solide .

Très bon chargeur, feed correctement sur mon MK18 ICS.

Le look est vraiment sympa et les texturs agréables.

La fenêtre pour observer les billes restantes dans le chargeur est vraiment intéressant.

Beaucoup moins chère que des PTS pour un job identique, au top !!

Super , un bon choix on passe de 30 a 130 billes juste avec un bouton a basculé. Pour moi qui utilise en version 30 billes sur tir sur cible , ne craignent pas les chutes sur sol c'est du solide.,.........,.......

super chargeur s'adapte bien avec ma réplique arcturus AR15 LITE CQB AT-NY02-CQ et le design est génial l'idée de voir la quantité qu'il reste dedans est ingénieuse je le recommande fortement a tous ceux qui on une AR15

The replica is awesome! We ordered 3 replicas, on suggestion from friend who already has one for a year - and the qualitiy is perfect. We upgraded perun mosfet on all of them, and paid for installing it in gun.One down side for my order is that, on one of the gunns we also paid for re shimming but we could not find out what gun has been reshimmed..

This was my first replica.
Very happy vith the quality, the materials and the performance.
The desing is modern and unique.
I think I couldn't have made a better deal at this price-point.
100% satisfied.

Super chargeurs pour base M4 Arcturus, feed nickel, bonne fabrication et finitions. C’est du solide. Le passage de 130bb a 30bb se fait très facilement et plus trop de perte de billes avec le bitonio qui sort du chargeur

If you want to watch an in depth review, it is available in my YouTube channel. I'll provide a direct link to my video here;
https://youtu.be/8IBXhqMC4hU?si=_QOjgiqwsvW_xuRf

External Overview
BOX
The box we are greeted with is a stylish mainly white themed one, with the company logos, has a matte finish and depicts an operator, his head on the front and his torso on the back. Opening the box, we find a brochure which informs as about some other replicas from Arcturus. Even the brochure has a premium feeling and the quality seems awesome. Removing the foam panel, we get to the main part of the box. The package includes;
The replica
A cleaning / unjamming rod
A mid-cap / real-cap magazine
A manual obviously
A chrono test result
A bag that includes an Arcturus patch, a magnet and more importantly a Deans to Tamiya connector for those who use a small Tamiya type plug with their batteries.
And finally, we have a beautiful set of front and rear iron sights and the Alen key that is required to install them and an Alen key that is bigger, and I still don’t know what it’s used for. I love it when companies include tools with their products.
REPLICA
The replica comes with the classic matte black color that most real steel firearms and airsoft replicas come from, that gives this replica a tacti-cool vibe.
The weight sits roughly at 2,6 kilograms, which is not as noticeable as it is evenly distributed in the body of the replica. This distribution makes the replica have a premium feel and lay comfortably in your hands.
This M4 also feels extremely sturdy despite the plastic elements and shows no wobbling or crackling, which is a solid win for the company.
The pistol grip has a very interesting grip pattern that is both comfortable and grippy and the size is ideal for medium sized hands, but this doesn’t mean that people with bigger or smaller hands won’t find it comfortable.
If you want to install accessories on this M4, you have plenty of space on the massive top RIS rail compartment that consists of 40 rail parts and if you want to add accessories on the left, right, or bottom side you can easily do so as there is an M-Lok system installed. If you are a little more extreme you are able to add canned accessories like a canned grip or PEQ box, which enriches the aesthetics of the replica with a different, crazy and good vibe.
The charging handle is the classic M4 one, but this time we have a working bolt catch and two working bolt catch release buttons, that are located both on the left and on the right side of the replica, just like the magazine release buttons.
The fire selector switch is also ambidextrous and makes a satisfying click sound once you pull it, although I’m not a big fan of the wobble that the right-side selector has, and I’ll try to fix it someday.
The included iron sights are both foldable, the front is adjustable for elevation, while the rear is adjustable for windage.
One feature of this replica that surprises me in a good way, is that the factory inner barrel diameter is 6.03mm, something that makes the replica extremely accurate and most companies should implement this feature.
The v.2 gearbox that is included allows the installation of a MOSFET system such as a Kestrel v2 and others like Gate Titan, Aster, and Perun V2 Hybrid. As Taiwan gun mentions in the description of the replica “The interior of this replica has several significant advantages. It features a quick-change spring system, and both the spring guide and the piston head are equipped with bearings. The polymer piston has steel teeth that work with high-quality gears. The gears are mounted on 8 mm plain bearings (4 pieces) and 8 mm ball bearings (2 pieces). The replica has a "microswitch" trigger. The gearbox ends with a Teflon-sealed nozzle that works with a polymer "Rotary" type hop-up chamber, which houses a steel, hardened precision barrel with a diameter of 6.03 mm.” (Taken from; https://www.taiwangun.com/assault-rifle-aeg/ar15-lite-cqb-at-ny03-cq-arcturus-3).
At the end of the barrel, we find a full metal flash hider that is also held in place with an Alen screw and if removed it reveals a 14mm CCW thread to mount a flash hider or a suppressor of your preference.
The batteries can be installed inside the stock, which opens up by twisting a screw.
To gain access to the Deans connector wiring you have to remove the stock and then unscrew the stock tube cover to reveal the T connector.
Sling mounts can be located below the stock tube screw, and we can find some QD sling mount points in several places on the replica.

Materials
The replica is made from reinforced ABS, nylon, steel and aluminum.
Metal parts include;
The inner and outer barrel
The flash hider
The handguard
Cartridge ejector
Both bolt release buttons
Both magazine release buttons
Both fire selectors
The forward assist button
The rear sling mounts
The stock tube assembly
The charging handle
The trigger
Plastic parts include;
The upper and lower receiver
Both iron sights
Pistol grip
The stock
Hop up adjustment
According to the manual, to adjust the hop up you have to pull the charging handle back and then the Rotary style hop up is revealed. Then adjust to your preference.

Overall for the price it is a really solid replica, and I'd recommend it especially for begginers.

If we start off from tip to butt, the muzzle brake is threaded as well as locked by a screw which is great.

The barrel and handguard, both of which are metal, are very short and extremely efficient in CQB situations. The handguard has true M-Lok slots all around, I have a BCM handstop and a flashlight on mine. The handguard has QD sling points on 3, 6 and 9 o'clock.

The body and stock is some sort of very durable polymer, it feels very stiff and resistant to scratches or dings. It is also fully ambidextrous.

A Gens Ace 7.4V 1500mAh battery fit with no problems at all, stock can be fully extended or collapsed.

All in all, if you're looking for a very capable, well built and budget-friendly CQB rifle. This is it right here!

I love these magazines, I bought 5 and used them all during games, never had any feeding issues with my arcturus ny06. A tip for changing the magazine from 130 to 30, is that you need to take the pin out close to the feeding side of the magazine. It took me such a long time to figure that out, but it is a super great mag!

The magazine works flawlessly. Easy to load and reliably feeds rounds. The construction feels solid and durable. This product has significantly improved my shooting experience. Very satisfied with the quality.

a bit bigger than i initially thought but they fit perfectly on my jg g36 with the m4 magwell from battleaxe, they look sturdy and were a great solution for my pouch problem with the g36 mags. Color matches the gun perfectly and i havent had any feeding issues so far

Have 4 of these mags, no feeding issues, clears the whole mag thanks to protruding follower. The follower is red, easily confirming an empty mag.

Slightly loose in my M4, nothing some tape on the side couldn't fix.

Really nice quality just took a moment to understand that you need to remove the metal pin at the top to slide out the plastic inner part from the casing to change the bb count, but nice plastic not too slippery and is quite durable, the spring also seems to be good for now will keep using and see what happens, as long as you don`t keep the spring under tension all the time should last a while...

Jó tár! Arcturus fegyverekkel jól működik, a gyártóból eredően.. :) Elég könnyű, de masszív műanyagból van.
Adagolási problémába nem futottam bele, de van egy kis kotyogása a replikában..
Teszi a dolgát, tárol-adagol. A realcap funkció milsim játékokhoz hasznos!

Hi there, i buy 4 if this beautys cuz i have one to my gun already

They are solid some good quality plastic
I didnt know that they are fixed with a metalpin and i was close to break one

Negativ is the feeding with a odin speedloader
Cuz you lose 3-5 bbs

In general for this price its amaizing
Would buy same again and thanks to taiwangun my Favorit store

I love this magazine; it's fantastic. The build quality feels amazing, and despite accidentally dropping it multiple times, it remains unscathed. The feeding performance is flawless; I've never encountered any issues with it. Being able to easily remove the actual magazine from the shell is incredibly convenient, simplifying the cleaning process without needing a screwdriver. While I haven't personally utilized the variable system, the concept of swiftly switching between 130bb and 30bb capacity seems nice.

I’m looked for an ar and I got recommended this brand from a friend. ( lots of good feedback)
I choose this model because I play in outdoors and indoors as well.
Disclaimer : It was the perfect pick!

The gun comes in a nice box and you get the gun, flip up sights , stickers, magazine and a patch ( It is a nice touch!:))

Out of the box: The gun feels realistic and quality.It is really sturdy, no creaks, sounds whatsoever. The body is made of polymer , but is really strong, the front is metal.
The magazine is adjustable real to mid cap. It is nice to have a mid cap as stock, also the mag is supreme than other mags that I come across.

Several games after: In the field the gun felt awesome. It has a high rate of fire with the 11v lipo(1300mah is easy fit) In the semi it is snappy. You can hit targets in the 55-65m range, after that it is harder. (I use it with 0.28g bb-s.) It is very consistent, no drops in the fps I got 393-394 fps in the crono(0.20g) This size was a perfect choice I can easily maneuver in buildings and confidently use this weapon outside as well . I fell, dropped the gun several times in matches with no problems. It Is very light so I can carry thru out a whole weekend of play and milslim events.

I really recommend this weapon who wants a reasonably priced , well made, long lasting , gearbox with quality internals, hassle free out of the box gun.
And who plays indoors and outdoors as well.

Pros:
High quality, of the box goodness, Long lasting, Light, good almost every scenario , price

Cons : the dust cover is not clicking back to place properly, limited battery space, only top rail( but you can put more rails after)

This rifle has a very realistic feel. It is also very sturdy and has an adjustable stock.

The only rhing I didnt like about it, is how tight the quick spring change nut comes out of the box. Had to use pliers to unscrew it. Ones that was done, it was so easy to replace springs.

Other than that, I liked it, and it came packages so nicely.

Awesome magazine!!!
Follower spring is strong and it can feed aegs with insane fire rate no problem.
Extender follower does help a lot.
Good external quality and the bb window is useful.
Nice texturing and lightweight, will not slip through your hands in hot weather.
Only downside I found is that some magcatches may be little picky with this magazine.

Sometimes it needs a lot of force to properly click in place. That is the case for both mags I ordered, while other Arcturus mags work perfectly. Other than that, it does what it's supposed to do. The variable-cap tab is a little difficult, but I don't really use it

I absolutely love this mag, it great. The build quality feels amazing. I've dropped mine several times with not so much as a scratch. It feeds amazing. Never had any feeding issues whatsoever.
It's very convenient to quickly be able to pull the actual mag out of the shell. It allows for easy cleaning without having to use a screwdriver.
I haven't used the variable system, but it seems very cool to quickly on a whim be able to change from 130bb cap, to only 30bbs.
Overall, another common Arcturus.

The fact that these can be switched from low to mid cap was a surprise to me. I've been searching for some magazines to fit my UAR501 without worrying for the fit issue. Definitely the best price for these on the market. Will come again if I need a replacement.

Amazing mags for my arcturus m4 replicas. Lightweight, durable, quality also on point. No feeding issues. Also works great with double eagle replicas.I absolutely love that mags have transparent window and you can see when you almost out of BB's. I highly recommend this mags.

- Build quality as expected, lightweight.
- Windows for bbs is meh, you need to look directly into it, you can not see anything from pointing your replica, you have to basically lean forward or you have to align your weapon so you look direclty into the bbs window
- The window is also very dark..
- Spring VERY VERY strong from the beginning
- Did not fit well into my hopup at the beginning, had to change
- The plastic bit at the photo on the right(back side of the mag) is very good for open pouches with no retention, prevents the mag from jumping(more tension)
- It is not very good for high speed low profile with a lot of tension elastic mag pouches, or you have to remove the plastic bit at the back
- Price OK
- Red follower OK, pushes extra 2-3bbs into the chamber.. (kinda disappointed)
- 130bbs capacity is OK, but 150 would be better for me

Conclusion, not very user friendly since I had to do modifications to the 6 mags..

Very good use of materials, durable magazine, ergonomic design. It dispenses accurately and continuously, but before use it is recommended to move the spring gradually through partial refills. The product is excellent value for money and I warmly recommend it to all M4/AR15 users.

I ordered this mag not long ago, I had a game with it. I use it with a cyma cm.515. It feeds well.
I like that you can easily pull out the internals of the mag, because if you cant buy the tan coloured, you can easily paint it whitout painting any neccessary parts of the mag. The switching between 130 round and 30 rounds is so simple and easy.

I haven't had any problems with it so far, I ordered it together with "AT-ST01 LWT CQB SPORT - BLACK [ARCTURUS]"
There is no downside. The gun wobbles a bit, but it doesn't bother me. nice color and shape

Pros:
- There is a nice window on the side of the magazine so you can see how many BBs you have left.
- Very light
- Feeds all BBs in the magazine.

Cons:
- A bit expensive
- A bit wobbly in my Arcturus AR15 LITE CQB AT-NY02-CQ (electric tape fixed this)
- The window on the side is tinted and not completely clear so a bit hard to see how many BBs are left in the magazine.

Meines Erachtens die besten Magazine die man aktuell für m4 Derivate erwerben kann. Funktionieren einwandfrei in meiner E&C mk18 gen 5 von dem großen B. Bezahlung und Versand ging super schnell . Einfach top Shop immer gerne wieder.

One of the better brands for M4 magazines. It fits very well on my replica and I do not get any rattling sounds etc. When lubricated properly they feed well and I dont have any problems with them. Recommended!

El cargador es genial y alimenta la replica correctamente, cumple con lo que dice, se le puede poner a 30 bb reales o a 150 creo que era, fácil de desarmar para limpieza y lubricacion. Es genial compacto y cómodo al agarre, encaja a la perfección en cualquier replica

Alors là je dois avouer, je suis bluffé de la qualité des magazines, avec la petite fenêtre qui indique les 30 dernieres billes, le follower qui sort pour pousser toutes billes dans la réplique, le switch de passer de 30 (Real cap) a mid cap 130, la robustesse/solidité, a t'elle point que j'ai bien fait d'en acquérir 10 :)

Arcturus' polymer M4/M16 variable-cap magazines from TaiwanGun are an excellent choice for airsoft players. The magazines hold between 30-130 rounds, and their reliable feeding ensures smooth and consistent shooting. The durable polymer construction ensures long-lasting performance, while the variable-cap design allows for customization and versatility in gameplay. Overall, a top-quality product from Arcturus.

This mag fits every M4 I have, and they are amazing products! Cycles extreamly well and look good doing so. They might be pricier than the other ones but they are worth it!
Will be buying more of these!

everything was fine, I got what tehy promised, they came quickly. and that's what I love about them is easy to take apart or replace a part of each magazine and they were very helpful with the selection.

These are really solid, tough plastic that can take a bump or two. Feeds great straight from the box and switching from midcapacity to low is a cool feature.
They are thicker than some other 5.56-style magazines though, and can be tricky to fit into snug mag pouches.

Sehr gut verarbeitet ! Feeden einwandfrei ! Wartungsfreundlich und die 30 Schuss Funktion ist sehr geil. Material ist ein hochwertiger Kunststoff und keine Gussränder vorhanden. Das Schaufenster ist einfach so cool, hilft oft bevor man riskante Sachen wagt schnell schauen und wenn die Feder schon zu sehen ist hat man eine höhere Chance nicht leer zu laufen wenn man dann die Kugeln braucht !

Tested this magazine out with 3 different M4's ASG Devil, MTW HPA, and a Krytac, no feeding issues at all on any of the guns.

A neat feature that my team members also pointed out was the windows that shows how much ammo is left.

We where also very satisfied with the follower, it only allows 2 bb's to be lost on reload, where a standard mag, or even a PTS mag looses 4-5 bb's.

Downsides:
*the bottom plate is made of the same plastic as the rest of the mag.
*the mag wobbles in all 3 guns, but nothing a bit of tape won't fix

The mags are working perfectly, plus saved a lot of money on the deal! :)
And I love the fact that you can choose between 30 and 130 bb.
The quality is just amazing, good grip on them, they’ll won’t slip out of your hand!
I had 6+ 1 mags with me on the last game, and like this the game was just excellent.

Nice and light magazine. Very easy to change to the 30round feature. They took some unfortunate falls from chest height and they are like nothing happened. Will get some more probably, to carry only these. They also slide in and out of the gun like butter and i haven't noticed any play in the receiver.

Good mags, you can fit about 133 rounds in them. Easy to load, leaves 1or2 BBs between the mag and the gun. Great that you can see on the side window, if you have less than 30 rounds left.

Fits in all my m4's and feed great.
Very light ( almost scary).
Whats great is de nop so you do feed all the bb's.
Also the window on the side is nice so you can see if you got less then 30 bbs in your mag