+48 123626134 [email protected]
BattleAxe  FBP2345 | Manque temporaire
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock
  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: BattleAxe
    Code: FBP2345
    Poids 175 g
    Couleur noire
    Matière polymere
    Modele chargeur mid-cap
    Longueur 200 mm
    Capacité chargeur 200 BBs
    Compatible avec AR15 / M4 / M16
  • Opinions

    • - 15.01.2024 A écrit:
      Le chargeur paraît de bonne qualité, le prix est très bon et il rentre dans ma m4 de chez lancet-tactical cependant au début il ne feed ait pas bien car mal maintenu, un petit peu de scotch au tout pour que que les chargeurs soit mieux maintenus et ils feedent impec !
      Avis d'opinion: 0
    • - 02.02.2025 A écrit:
      It's a good Ar15/m4 mag that can hold up to 200 bbs, the only bad thing is that you have to shave a little where you put the bbs so that it fits better on the gun, other than that it's was a 5 stars.

      É um bom mag de Ar15 / m4 que consegue aguentar até 200 bbs, a única coisa ruim é que você tem que raspar um pouco onde coloca o bbs para que caiba melhor na arma se não fosse isso era 5 estrelas.
      Avis d'opinion: 0
    • - 11.11.2024 A écrit:
      200 bbs is a great number for a mid cap.
      The spring load is not too strong so it will not destroy anything.

      The size is a little bit wider than normal m4 mags but only by a little.

      They are good and reliable with a nice pattern on them.
      Avis d'opinion: 0
    • - 12.08.2024 A écrit:
      I’ve been using this 200-round polymer magazine with my AR-15, and it’s an absolute game-changer for long-range shooting sessions and tactical training. The polymer construction is surprisingly durable; I've dropped it a couple of times during drills, and it hasn't cracked or even scuffed. The capacity is fantastic—I can go through an entire training session without having to reload once. It feeds smoothly, even with rapid fire, and I haven't experienced any jams or misfeeds. It’s slightly bulkier than your standard mags, but the trade-off is well worth it for the extended capacity. Highly recommended for serious shooters!
      Avis d'opinion: 1
    • - 10.08.2024 A écrit:
      It is cheap or should I say affordable. I would not drop it into concrete like I would not drop anything else there either. It will last in normal use just fine and if you manage to break it, who cares? Just buy 5 more for the price of one epm mag! I don't know why others say it does not hold 200 bbs. I managed to fill it with 204! I did count each one. Feeds well, fits well and you can grate cheese with the texture.
      Avis d'opinion: 0
    • - 05.08.2024 A écrit:
      Price: UNBELIEVABLE! For 8 bucks, this is the best deal I’ve ever seen on mags, the texture is great, the compatibility is excellent and the feeding is perfect every time, the plastic looks a little bit cheap, but for 8 bucks, this is a must have item !
      Avis d'opinion: 0
    • - 30.07.2024 A écrit:
      In the product description it says that it is compatible with APS rifles, but it doesn't seem to fit APS because 4-5 bbs were fired and nothing came out of the other shots. The magazine is thinner at the top and this is the reason for it falling out of the magazine slot.
      Avis d'opinion: 0
      Odpowiedź sklepu:
      Often it happens that the magazine needs to be slightly adjusted to a particular model of replica.
      Feel free to contact our service, we will be happy to help in this situation.
    • - 21.05.2024 A écrit:
      Great mags, feeds perfectly on 22 rps. Some wobble but does not affect performance. Hold 200 rounds and are longer than regular mags. The mags have great grip. I would recommend to anyone who needs mags. Great price great value!
      Avis d'opinion: 0
    • - 01.05.2024 A écrit:
      Bought the 5 pack of these mags and they have preformed flawlessly. Good quality construction.. highly recommend for the $$$$
      My only complaint is I didn’t buy more … love the hex design give good grip
      Avis d'opinion: 0
    • - 22.03.2024 A écrit:
      Hello everyone,
      Im going to list the pros and cons for this item in order to help you make a better choice on if this magazine is the right choice for you.
      Pros:
      - Large magazine capacity: although 200 rounds is a bit of a stretch. Realistically more like 180.
      - Lightweight: super light and doesn’t add much weight to your kit.
      - Durable : I’ve played at a few milsims so far and this mag hasn’t broken while tossing/being flung around.

      Cons:
      - Size: this is probably my biggest pet peeve of the mag, it is longer than all my other m4 magazines so not only does it stick further out of mag wells but doesn’t like to sit in kangaroo pouches by any means.
      - Wobble: this magazine in most gun, will wobble side to side, it doesn’t have any effect on feeding but just is a nuisance.
      - Fitment: this magazine does not work in 416 variants, it just doesn’t like to feed. I tried my stock vfc 416 and another 416 with a maxx hop. It’s the angle of the magazine in the magazine well.

      Neutral:
      - Spring tension: honestly for a “200 Round” magazine, it’s not terrible. I’ve seen far worse (elite force midcaps and Arcturus pcc mags) but it’s definitely not shooting the bbs out of the mag at max velocity. You can take one apart and lube it up which does help but honestly the gains are minimal.

      Overall, Id say this mag is great if you only rock 3-4 magazines and dont have a kangaroo pouch on your rig that you throw your mags in. Hopefully my pros and cons lead you in the right direction.
      Avis d'opinion: 1
    • - 11.01.2024 A écrit:
      Got it cuz I didn't know which mag would fit my gun now i know which one to buy. Great quality. I like that they were all midcap best bang for a buck if u don't know which one to buy. Different capacity got 3 that were same and 2 different but i like them all.
      Avis d'opinion: 0
    • - 08.01.2024 A écrit:
      I have been using these mags for a long time and I can say: a capacity of 200 balls is cool! Fewer mags, fewer reloads, more time in combat. The springs are not very powerful, they can lock up a little from sand and dirt, so it is better to keep these mags clean and in no case treat them with silicone inside.
      Avis d'opinion: 0
    • - 01.01.2024 A écrit:
      I first bought 1 magazine for a Double Eagle M923A DEK762, then 3 more because I really liked it. It's light but sturdy. It's nicely done. It is easy to load and dispenses ammo flawlessly. It fits the gun well.
      Avis d'opinion: 0
    • - 13.12.2023 A écrit:
      Feeds very well and fits well in the M920A Aeroknox AX//15 AEG Rifle ETU [DE], you jsut need to angle it a bit forward to lock it in place. Tried it with fast single shot, full auto and a mix and it did feed without skipping a beat! All BB's were also fed into the gun leaving the magazine completely empty!
      Avis d'opinion: 0
    • - 21.11.2023 A écrit:
      It dispenses very well, but it can't hold 200 bb exactly. Its grip is super massive, it doesn't broke easily. It fits very well in my wests pocket, I will probably buy more of this, because I'm quite pleased with it.
      Avis d'opinion: 0
    • - 19.11.2023 A écrit:
      Nagyon massziv a tár pintosan illeszkedik a fegyverben valamint nem utolsó sorban az adagolása is verhetetlen legérte az árát!
      Viszont 200db bb biztos hogy nem fér el benne inkább olyan 140-160db mondanám a valósnak
      Avis d'opinion: 0
    • - 04.10.2022 A écrit:
      I bought 5 of this for my M4 replica. This is rally nice 3D honeycomb design. It's give you a better grip for the magazine. I fired 3.000 bullet with one mag only to test it's limit. Works after that perfect. But sometime you need to give this bad boy a little tap on the bottom. My only problem with is is that it's a little bigger than the other magazines. But it's just a minor thing. Fits perfect to my rig.
      Avis d'opinion: 0
    • - 28.12.2021 A écrit:
      The magazine feeds perfectly. Feels very nice and is very reliable. Didnt have a bit of trouble yet. Reccomend this a lot, you wont have any problems with this magazine. Feels very nice and has a lot of detail put into it. Looks very cool, feels very cool, works very cool, is very cool.
      Avis d'opinion: 0
    • - 14.12.2021 A écrit:
      Very good magazine for the price. I haven't had any issues with them so far.

      They look and feel nice and fit relatively well to my gun. They sometimes need some extra pushing to get them to lock in place but that may be an issue with my hopup chamber.

      Recommended
      Avis d'opinion: 1
    Ajouter un avis
Chargeur compatible avec les répliques de type M4 Aux standard Tokyo Marui. Il est aussi compatible avec les répliques de la marque CYMA, A&K, APS , Dboys, JG, A&K.

Les chargeurs a moyenne capacité ce caractérise par un type de préparation spéciale lors d'un premier usage, afin de pouvoir utilisé toutes leurs fonctions il faut respecter ces quelques consignes:
  • lors du premier usage *IL EST INTERDIT* de charger le chargeur a son maximum, cela peut provoqué des dommages.
  • dans le but d'un fonctionement sans aucun probleme *IL FAUT* siliconer le chargeur a l'aide d'huile de silicone, en en mettant dans le puit de chargement des billes.
  • lors de la premiere utilisation *IL FAUT* charger le chargeur avec une dizaine de billes, ensuite les expulser. Cette manipulation est a refaire plusieur fois, a chaque nouvelle essait il faut rajouter 10 billes jusqu'a obtenir la capacitée totale du chargeur.
  • RAPPEL*, apres chaque fin de partie *TOUJOURS* vider les billes, *NE PAS LAISSER* les billes dans le chargeur ce qui peut provoquer une usure prématurée du ressort.
  • RAPPEL* il ne faut pas oublié de conserver vos chargeur avec de l'huile de silicone.
  • Le fais de respecter les instructions ci-dessus, garantie une longue durée d'utilisation du produit.
LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent etre acheté par des personnes majeur


Consignes de sécurité et d'utilisation

Ce produit répond à toutes les exigences réglementaires et peut être utilisé en toute sécurité sans instructions supplémentaires.
SKU: FBP2345 · EAN: - · Chargeur Polymere 200bbs AR15/SCAR16/TAVOR/ARX100 - Black ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport