Chargeur Hi-cap pour CM.041 [CYMA]
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock
-
Formes de livraison
Entrer le Pays et le code postale, afin de voir les couts de livraisons.
-
Spécifications techniques
Fabricants: CYMA Code: FBP1013 EAN 5901698404734 Poids 175 g Matière acier Modele chargeur hi-cap Capacité chargeur 200 BBs Compatible avec MP5 -
Opinions
Ajouter un avis-
- 26.05.2023 A écrit:La livraison est rapide et complète. Les produits sont conformes et bien emballés. Le Service Après Vente disponible et réactif ; La relation et communication agréable. Vendeur à recommander pour de futures commandes
-
- 13.04.2023 A écrit:Je suis satisfait.
Très content de mon achat.
Bonne capacité.
Sans forcément de bruit des billes à l’intérieur du chargeur.
Très confortable la prise en main pendant les parties.
L’article correspond bien à la description.
Je n’hésiterai pas à commander à nouveau.
Et je recommanderais sans hésitation à mon entourage.
…… -
- 16.08.2022 A écrit:Acheté pour la CM 0.41 Blue édition :
Il va parfaitement sur la réplique et sur les portes chargeurs (8 fields), après avec une cadence élevée il faut moller souvent, et j’ai eu quelques problèmes d’approvisionnement : je m’explique, lors d’une partie le chargeur était encore plein et j’avais correctement mollé mais la réplique a tirée sans billes, j’ai dû enlever le chargeur et le remettre, re moller -
- 26.03.2026 A écrit:Bought it for my 15 year old mp5 replica that I bought off a friend and fits perfect good feeding and everything perfect size bottom wheel for charging the magazine just perfect 11/10 would recommend to anyone!
-
- 10.02.2025 A écrit:Nice, sturdy, metal design feels good in the hand and while reloading. The one hicap that comes with the replica most of the times is not enough. So you need either a couple of these or a full 4+1 midcap setup.
-
- 10.12.2024 A écrit:These are easy to fill, made of metal/feel good in the hand, lock in securely to Cyma MP5s, and feed very well. If you like hi caps, you can't go wrong with these - especially given how absurdly affordable they are (something like 10 bucks cheaper per mag than Evike). If you prefer midcaps instead, taiwangun also carries those.
No complaints aside from rattling / needing to wind the mags up, which is an inherent feature of all hi-cap airsoft mags. If you want to give up a little bit of magazine capacity to avoid those things, taiwangun has midcaps too. -
- 18.12.2023 A écrit:Opened as a gamble directly on the field, to use on my 25 bbs/s custom cyma mp5 and they perfomed really well.
For the price really recommended , no feeding problems, using 0.28 g&g bio bbs.
After having the pring fully cocked the magazine empties hinmself.
If i have to find downsides the finish of the refill port cover could be better as it does not lock perfectly shut, but nothing a file could not solve.
The charging wheel iven if oversize, that is awsome, it does not really stick out that much leaving it a little bit difficult to operate with gloves.
Other than that, my advice: go for it if you need affordable and reliable hi-cap mags. -
- 10.05.2023 A écrit:I ordered 3 of those and i think i will get some more. For the price, the mag is fantastic. It does feel a bit cheap, but once you get used to it you will lose the cheap feeling. I noticed only one bad thing and that is the cap for loading BBs into the mag...it feels cheap and i always think i will break it, if i dont handle it extremly gentle. Otherwise they are nice.
-
- 16.11.2022 A écrit:This is the first item from taiwangun that I don't like so much, it actually fits my cm 041 G mp5 gun with difficulty, it is difficult to insert. What's even worse is that there are 130 magazines that do not roll and also dispense better.
-
- 02.11.2022 A écrit:Good mags for the mp5. Not do big to use in cqb. Better than the original mag on the cyma mp5. .
Easy to fill and use. Metal mags.
With 4 of these mags mot of playfunn on the field.
When day drop no damage.
Good price for the mags
-
*IL EST INTERDIT* de moletter le chargeur trop longuement cela peut entrainé une panne du systeme d'alimentation des billes.
Fonctionne avec :
CM.041B
CM.041
CM.041J
M5-071
M5-072
M5-S5
M5-A4
M5-S6
G.5
G.5K
CM.049SD6
CM.049
CM.049J
- dans le but d'un fonctionement sans aucun probleme *IL FAUT* siliconer le chargeur a l'aide d'huile de silicone, en en mettant dans le puit de chargement des billes. RAPPEL*, apres chaque fin de partie *TOUJOURS* vider les billes, *NE PAS LAISSER* les billes dans le chargeur ce qui peut provoquer une usure prématurée du mécanisme
- RAPPEL* il ne faut pas oublié de conserver vos chargeur avec de l'huile de silicone.
Fonctionne avec :
CM.041B
CM.041
CM.041J
M5-071
M5-072
M5-S5
M5-A4
M5-S6
G.5
G.5K
CM.049SD6
CM.049
CM.049J
Consignes de sécurité et d'utilisation
Ce produit répond à toutes les exigences réglementaires et peut être utilisé en toute sécurité sans instructions supplémentaires.SKU: FBP1013 · EAN: 5901698404734 · Chargeur Hi-cap pour CM.041 [CYMA] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant 

Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:
LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques
Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport
