+48 123626134 [email protected]
S&T  STPP540 | Manque temporaire
Cet article n'est pas disponible
Prévenez-moi quand le produit est en stock
  • Formes de livraison

    Entrer le Pays et le code postale, afin de voir les couts de livraisons.

  • Spécifications techniques

    Fabricants: S&T
    Code: STPP540
    EAN 5900352012308
    Poids 400 g
    Couleur noire
    Matière acier
    Modele chargeur hi-cap
    Capacité chargeur 540 BBs
    Compatible avec PPSH
  • Opinions

    • - 03.04.2025 A écrit:
      It was for a “PPSH 41 BLOWBACK AEG WW2 S&T”

      But the problem is the magazine does not lock.
      Not compatible with my PPSH S&T.


      I advise you not to buy it if it is for PPSH S&T

      Regards.
      Avis d'opinion: 0
      Odpowiedź sklepu:
      Have you bought the replica from us? Replicas sold by different retailers can be built slightly different but those slight changes can influence essential functions of the replica. You can still contact our techs and they will for sure help you with your issue :)
    • - 04.06.2026 A écrit:
      PRO: Sokkal jobb ergonómia: Nem húzza le a fegyver alját mint a böszme nagy dobtár. Sokan (én is) hajlamosak a fegyvert a tár tövénél fogni, így sokkal mobilisabb, kényelmesebb és könnyebb vele a játék.
      PRO: Bele megy SMG tárzsebbe
      ​PRO: Halkabb és strapabíró: Bár ez is Hi-Cap és zörög benne a BB, a kisebb méret miatt sokkal halkabb mint a dobtár. Robusztus, tartós anyagból van ha leesik a földre akkor sem lesz semmi baja. A színe és a fényes felülete is tökéletesen megegyezik a fegyver gyári színével.
      ​KONTRA: Minimális lötyögés: Egy picit jobbra balra előre hátra lötyög a fészekben, nem fekszik fel olyan atomstabilan mint a dobtár. Emiatt ha nagyon rángatja az ember játék közben, ritkán előfordulhat egy egy adagolási kihagyás, de alapvetően szépen és megbízhatóan adagol.
      ​KONTRA: Nem szigetelhető: A belső felépítése miatt ezt a tárat sajnos esélytelen polifonnal vagy szivaccsal kibélelni a zörgés ellen, együtt kell élni a hangjával.
      ​KONTRA: A rögzítő stift gyengesége: A fém lemeztestet és a műanyag belsőt összetartó stift hajlamos játék közben kimozdulni. Elhagyni nem fogod mert hamar észrevenni, de kiállhat annyira hogy bökje a tenyeredet fogás közben. Tipp: Érdemes egy kis darab ragasztószalaggal lebiztosítani ha valakit zavar.
      Avis d'opinion: 0
    • - 09.07.2025 A écrit:
      Ma kaptam vissza a szervízből, egyenlőre úgy néz ki hogy sikerült megjavítaniuk.
      Most már 23 bb-t sikerült kilőni egy feltekeréssel.
      Köszönet a taiwangun szervizének!

      Got it back from the service today, so far it looks like they have managed to fix it.
      I have now managed to shoot 23 bb's with one rewind.

      Thanks to taiwangun service!
      Avis d'opinion: 0
    • - 31.05.2025 A écrit:
      Nem ajánlom! Rosszul adagolta a BB-t, folyamatosan megakadt, és most harmadik használat után tönkrement a tekerő rajta. A legdrágább tár volt amit vettem és egyben a legsz*rabb is!

      I do not recommend it! It dispensed BB badly, kept jamming and now after the third use, the coil on it is broken. It was the most expensive magazine I bought and also the worst!
      Avis d'opinion: 0
      Odpowiedź sklepu:
      In such cases, we always ask our clients to contact our techs via the claim form on the website - https://www.taiwangun.com/claims.html - because that would give us a chance to straighten the situation up.
    Ajouter un avis
Une construction sobre mais efficace compatible avec les PPSh de la marque S&T.
  • IL EST INTERDIT* de moletter le chargeur trop longuement cela peut entrainé une panne du systeme d'alimentation des billes.
  • dans le but d'un fonctionement sans aucun probleme *IL FAUT* siliconer le chargeur a l'aide d'huile de silicone, en en mettant dans le puit de chargement des billes.
  • RAPPEL*, apres chaque fin de partie *TOUJOURS* vider les billes, *NE PAS LAISSER* les billes dans le chargeur ce qui peut provoquer une usure prématurée du mécanisme
  • RAPPEL* il ne faut pas oublié de conserver vos chargeur avec de l'huile de silicone.
Le fais de respecter les instructions ci-dessus, garantie une longue durée d'utilisation du produit.


Consignes de sécurité et d'utilisation

Ce produit répond à toutes les exigences réglementaires et peut être utilisé en toute sécurité sans instructions supplémentaires.
SKU: STPP540 · EAN: 5900352012308 · Chargeur curve 550 bille pour PPSh [S&T] ·
Signalement d'un problème de sécurité · Personne responsable et fabricant
Personne responsable et fabricant
Personne responsable de la mise sur le marché du produit dans l'UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Pologne · [email protected]
Fabricants:

LES REPLIQUE DISPONIBLE SUR LE SITE WEB TAIWANGUN.COM peuvent être acheté par des personnes majeurs . Produits destinés uniquement à l'AIRSOFT et aux jeux tactiques

Des questions ? Nous sommes heureux de vous aider. Envoyez-nous un e-mail via [email protected]
* Prix avec la TVA, sans les couts de transport