[Set] CM.041H Upgraded Version [CYMA] + 130rd Polymer MP5/MP5K Cargador - Negro [CYMA]

Muy buen material, robustos, no pesan nada y ademas alimentan muy bien. Estéticamente son muy guapos además que super funcionales y son baratos. Tiene las 3 Bs: buenos, bonitos y baratos. Volvería a comprar sin duda en un futuro si necesito más.

Para mp5 es el mejor cargador, no tiene holguras, alimenta bien y pesan poco. Una gran opción calidad precio.
Buen material, bonitos y resistentes.
Tened en cuenta que al tener una parte algo más ancha pueden ir algo más ajustados en los pouch.

Estos cargadores mid-cap son de lo mejor para las réplicas MP5 de cyma. Son compatibles con todos los modelos.
Mantienen una estética renovada acorde a los tiempos actuales y tienen una ventana de simulación de munición al estilo pmag.
El muelle funciona muy bien y la alimentación de la réplica no me ha dado fallos.
Son muy ligeros al ser de polímero, a la vez que resistentes.
Lo más atractivo sin duda es su precio, ya que es un producto de gran calidad.

Van perfectos con un Mp5 Cm041G platinum. Enganchan muy bien y alimentan perfecto. Todos bien empaquetados y muy bien de precio. Son de un polimero ligero. Buen diseño y acabado. Se recarga muy rápido y no hay problema por caer al suelo por su bajo precio en caso de rotura.

Cargador muy muy recomendable por su diseño y estética, capacidad de 130 bolas, resistente a golpes, lo que te permite poder tirarlos al suelo al realizar el cambio de cargador.
Recomiendo sin duda este producto.

Cumple lo que promete.
Parece que funciona en réplicas de otras marcas.
Bien la relación calidad-precio.
El funcionamiento técnico es correcto.
Pesan poco.
Lo mejor de todo es que presentan una superficie muy rugosa que hace muy difícil que se resbalen de las manos incluso si el tirador usase guantes de mala calidad.
Son los que recomendaría si alguien me preguntase por cargadores de mp5

Tienen un tacto y estética muy buenos. No hay ningún problema con la alimentación de bbs.
Probados en una mp5 de ics y con un adaptador hpa en una mp9 de kwa. Por ese precio no puede pedirse más.
Los volvería a comprar.

El material es realmente bueno encaja perfecto la réplica y es muy vistoso y atractivo muy contento con él cargador su precio es realmente económico y sin duda la relación calidad-precio es inmejorable

The CYMA 130rd Polymer MP5/MP5K magazine feels surprisingly solid and well made for its price. Despite being lightweight polymer, it has a durable feel and fits securely in the replica with minimal wobble.

In my use so far, I have not experienced any feeding issues at all, and it has performed consistently during games. Loading is smooth and the capacity is practical for both CQB and outdoor play. Considering the low price point, the overall quality and reliability are very good. Definitely a solid budget-friendly magazine option for any MP5 setup.

Looks very nice, and was a great choice of midcap to go with my hicaps
The plastic feels high quality and the dummy rounds are cool
Required a small but of filling for it to lock into the mag catch on my JG gun but it works like a charm

this is the best magazine I ever found for an mp5.
very lightweight, nice design with the visible "bullets".
The magazine feels sturdy and solid.
It is silent and thereby has no loose pellets shaking inside when running around with it.
The reload feels super smooth, makes a satisfying clicking noice and sits perfectly.
Loose magazines are history

Great magazine, looks great, feels sturdy yet lightweight. and love the little window to see when it's loaded.
only problem is the purtution in the top and bottom may make it hard to fit in some pouches. i have to wiggle and kind force it down mine. but it works.

Also fits great in my CYMA MP5 SD6 High speed, no feeding issues at all.

As usual top quality, fast delivery and good prices. I bought multiple items, two replica's and a few magazines, no complaints!
Especially happy with my new SR25, out of the box a very good gun.
Happy to buy here again, and again,

As usual top quality, fast delivery and good prices. I bought multiple items, two replica's and a few magazines, no complaints!
Especially happy with my new SR25, out of the box a very good gun.
Happy to buy here again, and again,

The handling of this gun is great. The weight distribution is perfect, the center of mass is right around the mag well.
One thing to keep in mind is that because of the AR style buffer tube, the iron sights are difficult to look through.

Mags feed well, look great, sturdy material. They don't wobble, at least as far as I have experienced.

They fit any MP5-adapter for speedloaders such as the Odin or the Battleaxe speedloader (Product code BD7485). Would recommend.

The magazines have a premium look and feel. They seem to work flawlessly. Time will tell whether they can take a beating. Definitely worth the money and highly recommend buying from TaiwanGun. Even after the shipping cost, they were cheaper than buying from a US company.

I bought this replica with my own money and i can honestly say it is one of the bether MP5 replicas out there . It has a few drawbacks like a hopup unit that needs ajusting often or the loose fire selector but other then that it is 100% wort the money. Build quality is preaty good and the gear box is honestly one of the best ones i had in a factory replica. On 11.1 lipo i am able to achive a realy nice triger response and 25rps. I woul recomend this replica to anyone who is looking for a budget MP5 style airsoft gun 4/5 stars.

Do not wait if you want to purchase from here! Faster and cheaper then any of the competitors. Very happy and do not regret. I told my whole team and now we have a new go to site for guns. The cyma works beautifully on a 7.4 and shoots a consistent 330 fps with .20s

Gun is great, feels solid, looks great. Gear box sounded great. Selector switch is a really poor
It works but it should be better. The box it came in was mangled with holes in it.
I would like to see some mlock rails incuded. like the flash hider
Trigger is snappy for a short barrel accurate. For me I like.25 .28. Whish it was a regular hop up.

Preso per cm.106 plastica bella solida e estetica ottima coi finti colpi, aggancio perfetto ai primi utilizzi la molla fatica un po', ma dopo qualche carico e scarico vanno che è una bellezza. Pienamente soddisfatto dell'acquisto consigliato.

Beautiful gun, very sturdy with enough space in the stock for a lot of batteries, it's just a shame theres a lack of mp5 hi-caps out there. Overall, love it, love the rail, love everything but the mags.

Bought five of these to go with a CYMA MP5 041 that I bought from Taiwan guns. Everyone of them fit perfectly and feed flawlessly. They are also lightweight .Very happy with them. They also look cool with the faux bullets. I wouldn’t hesitate to buy more.

Shimming sounds great, the metal build feels durable in the hands, full auto is consistent, semi is snappy, only gripe is the etu, if you plan on running 11.1vs get a perun or a titan, overall I definitely recommend this gun to anyone looking at it

I was really impressed with this one. The wiring in the back is done wonderfully, you can hear the MOSFET load up when plugged in, the build quality on the externals are phenomenal. Very sturdy. Nothing wobbles, including the stock. All the upgrades I had put on my 15 year old MP5 are in this from the factory and the gear box is probably the smoothest I've heard out of any of the guns I own. Like absolutely perfect.. no gear noise, just the sound of the piston compressing air. Very impressed with this one

Honestly is one of the best airsoft replicas i have ever purchased.The construction of the gun is for most of it made of metal parts,and some plastic ones.It has a nice heft into it that i count as an positive.The only bad thing for me is the hop-up selector being very sensitive.But in generall is an very good gun.

The magazines are very solid and not too heavy. Good build quality. No issues with feeding so far, loading it is also very smooth.
Just make sure to spray some silicone oil into it every once in a while and it will last you a lifetime, even with such a low price.

It’s hard to complain about a magazine that costs $7.

They look really cool with the fake 9mm rounds in them and can hold a fair amount of BBs in them. Keep in mind though that a full mag can be emptied by the mp5 in about 2-3 seconds, so it may be a good idea to have a couple high cap mags as well. This is of course with full auto and semi auto is a different story where you have quite a lot of shots to take with it.

I really cannot complain about these though. Yeah my gun goes through them like my wallet does with airsoft but for $7 you can just buy a ton of these and fill them up and you should be pretty good.

Another excellent gun from Cyma!
This MP5 has a nice solid feel, and has a lot of customization options off the bat. The pre-installed picatinny/mlok rail allows for attachments as desired. The gearbox is flawless paired with Cyma's high speed motor. The charging handle also definitely feels like it cam be HK slapped for a while. It's amazing that I can get an amazing gun within ten days, to Hawaii from TaiwanGun, all while being packed together with other items very professionaly and tight. They are simply amazing, along with this gun.

Very well built mags, solid construction. Feed very well in to my cyma platinum mp5. highly recommend. Only complaint is you can't fit 2 in an m4 magazine pouch. But that isn't a big deal since there are plenty of magazine pouches for mp5 magazines

Pros: Material feels as cheap plastic
Contra: magazines themselves looks great. And their price are very good.
I did not experience any problem with their BB feeding

Overall I think it worth its price, and I can recommend for beginners.

So this way different over other mp5 models I've owned. Having owned many m4 models this by far simpler to take apart to service. When I say service I mean just that. OTB you must be careful how gun is put together from factory. The shimming is bad on the bevel so whenever you pull the trigger is gives off a whiney sound from the grip. Internals such as micro switch / gears 13.1 short stroked 4 teeth / compression components all are actually great components put together.
However... I did mention I owned many m4's so I have bins full of spare parts for a V2 gearbox.
First thing to see if gearbox was shimmed properly was I put in a 28 tpa motor. After semi and auto dry fries gears froze. I mean if you don't know what it sounds like to have gearbox shimmed just right. You are more than welcome to keep using it until gears destroy itself. Just don't expect nothing to happen when you change parts from what was originally in the gun from factory. Because truth is something is going to happen. The faster you try to make the gearbox go the stock parts won't handle to load.
Piston is a full metal rack. Not glued in the spots that tend to break. I changed entire thing. Cylinder ported on one side nozzle attached a had a good seal. Still it wasn't to my liking. So I replaced it all to something with better compression output.
Gears did have a few shims. Just was on the wrong spots. I had to add a few more. Oh factory grease had to go. Stuff is so sticky how do you expect gears to move freely if gears just stick together?
OEM mosfet had to goooooo. Being stuck with using a 11.1 with 20c only bat meant I couldn't span the trigger during those times you are giving cover fire for teammate to advance. So I changed it out to gate aster. If you are a good tec all these things I mentioned you know how fast I got this smg going...?
With stock spring fps went down to 294 / however rps went to 46. That's with mid cap mags. That's waaayy to fast for me so changed spring to m120 - fps went to 343 rps went to 36 which is comfortable for me. Oh forgot to mention I switched motor to a brushless 30k warhead black.

great midcaps with a very tight fit on cyma mp5 replicas with no wobble at all... maybe a little too tight, just be careful you've fitted it right before you start running. and they barely fit a CM.106

These magazines for the mp5 series are hands down the best on the market. They not only look amazing, but work even better. The capacity is large enough to stay competitive, but they're mid caps, so not picky feeding issues. They have worked in every mp5 I've tried them in, cyma, elite force, classic army, etc. I've never had one misfeed, and the polymer material holds up great if i throw them around or abuse them. Plus, they complete the mp5 look and get so many compliments. HIGHLY RECCOMEND!

I bought this model of magazine to be used with the cyma CM.041L and love the modern look of the magazine and if fits perfectly with the gun I am using. However after using it for a couple of games, I've come to learn of its design flaws.
First off it has the the wall sticking out in height with the magwell. It makes it very easy to know that the magazine has been inserted properly, but means it does not fit properly in the mp5 magazine pouches I tended to use them with.They still go in, but needs excessive force to pull out and messing with to insert.
When it came to feeding it worked perfectly with 0.2g bbs but when I tried using them with 0.28g bbs it started having feeding problems and could not be used in full auto.
In conclusion I would recommend another magazine for MP5s. The cool features on this one does not make up for the design flaws it came with.

Looks good, fits and feeds nice. Don't load it till the maximum because the first few shoots are going to underperform.
However, its difficult to fit it in pouch because of the wall thats sticking out.

These are some snazzy mags. They feed pretty well... I'll admit I didn't follow the instructions and fill them gradually over each use. I just give them 100 bbs and call it good. Fits perfectly in cyma mp5s. Also 3-d printed an adapter to my cyma ak for these, they feed well into that too!
Looks and feels great. For the price, most excellent.

Mine was broke durning the first game, maybe I had a bad luck but those mags aren'really good quality ones. Still better than high caps bit i'll recommend you to spend a bit much money on those mags and buy a better one if you want thrusty mags

I really like the gun that I got. It shoots great and feels like the real thing. The only issue that I have with it is that some of the screws that hold the frame on were stripped out. I had to run a tap and tape through them in order to get it to hold. Other than that it runs great.

Je ne peux pas donner les 5 étoiles sur 5.

Il y a des défauts qu'on ne peut pas passer à côté, ils sont réglables/fixables mais pour un néophyte vaut mieux pas s'y aventurier.

Les défauts :

*Le poids pour certains
*Le réglage HopUp qui ne reste pas (trop de jeux)
*Le sélecteur de tire (dure a rester sur le demie)

C'est les seuls "problèmes" qu'il y a. Pour l'instant après 2 partie (CQB et externe).

Le reste n'est que plus plaisir !
La réplique inspire confiance, la solidité à toute épreuve, et un design qui fera ses envies sur les terrains !

Tu cherches une réplique qui a une cadence de fou ? ✅
Tu cherches une réplique qui a de la gueule?✅
Tu aimes du compacte pour du CQB mais qui rivalise aussi en externe ? ✅

Alors fonce ! Et mets y une 11.1 et fait leur mordre la poussière

Ils sont robustesses, le Feed est excellent et le look qui en jette !

J'ai testé en les faisant tomber, hauteur humaine, mise a part la petite égratignures des coins, le reste n'a pas bougé ! Et il continue à Feed normalement !

Le design est juste magnifique aussi !

Great airsoft replica full metal construction is really durable and feels great also the trigger feels super snappy right out of the box. The M-lok rails also make it super customizable I personally have already replaced the handle for a fancier look.

The gun is heavy and the fire selector is mushy, but those are my only two issues. The fire selector I can easily fix and the weight just means it is quality. This is the best gun I own. The stock has enough room for a 3000mha cylinder battery, which will last you all day.

Excellent rof,excellent trigger response on a 7v and even better with a 11v (make sure your c rating is 20 or 15 so you dont burn your etu). best upgrade you can do imo is bucking nub and eut swap *when it breaks*. Only grip i have is that the hopup adjustment level moves when you fire ootb so best thing to do is put a o ring or spacer/washer in between the hopup arm screw and the hopup chamber itself.problem solved,hav etwo might get another soon (: totally recommended!

One of the most reliable and pleasing looking mp5's I have ever owned. Ready to play out of the box airsofts are always the best kind and this gun can certainly give you that. Fast, reliable and accurate, this gun has it all. The amazing design of this gun is not the only amazing design which it has. The gearbox is just soo well built and designed that it's fantasic. Changing the spring on weapons can be such a hassle, but luckily all the platinum versions of this mp5 have a quick switch mechanism. I would definitely recommend this to anyone who loves simple but well designed guns.

Holy crap the price! These are $15 minimum in the U.S.. they were half that here. I ordered a gun, 5 mags, and a bunch of bbs for the price of a gun only in the United States.

The build quality is just fine. I don't drop my mags if I can help it, so I think they will last as long as the springs hold up. I followed the instructions for breaking them in on the page that I bought these, like I do all other mags, and they worked flawlessly for my first few games. They don't feel cheap to me.

The capacity in these is crazy. 130 rounds for an mp5 midcap? Seems to good to be true. However, even though I haven't counted the actual bbs I can fit, the quantity seems to be much more than lower cap mp5 mags.

All in all the price and quality seems great. Shipping is pricey for just the mags, but if you pair it with a gun, it's the bargain of the century.

This gun is heavy.....duty. It's a lot heavier than I thought it would be. No it so heavy to make it a pain, but I don't think the externals are going to break any time soon. The stock on this gun is nice. I really like the mini crane stock it comes with. It looks good. However, there is NO way you will fit a 9.6 in it, which is fine with me. I run lipos anyway. It fits my 1200mah stick 11.1 and 1200mah 7.4 batteries. Basically if it fits a buffer tube, this gun will fit it. I only run a 7.4 though. The muzzle is pretty slick to on this gun. The quick detach muzzle is a breeze to take on and off. Under the quick detach is the 14mm negative threads that have an orange painted thread protector on it. That's the part that is painted. The quick detach muzzle device is black. It came in the box, not attached to the gun when it arrived.

Without opening the gun up, it shoots really smooth out of the box. I did NOT get the re-lube and shim from Taiwan Gun. I should have, but didn't realize it was an option (first order from this website). The trigger is my favorite thing about this gun. The reset on it is so light it's nuts. It's a little hard to get used to, but with time I think I'll be able to really put rounds down range. I have other guns with electronic trigger groups, but this one seems the smoothest, and shortest reset for sure. The gun sounds good when shooting. No gear grinding or anything like that.

The mag that came with the gun is nice. Other people on here say they feel cheap, but I think they feel good. Not steel by any means, but really nice. Like they could be dropped at least a few times and not break. However, I wouldn't drop them a bunch. They have fed flawlessly for me so far. Only a few games in.

I live in southern Utah, United States. The gun got to my door in exactly a week. Evike takes about that plus or minus a day to ship to my small town. So quite impressive if you ask me. Roughly the same shipping time for me half a world away as more "local" shops.

The price on this bad boy was incredible. I paid $260 shipped for this. It's currently $320 on evike shipped. Saved me $60 to get it from Taiwan Gun. The price freed me up to purchase 5 addition mags and some .28 bbs for the same price as the gun only elsewhere.

All that being said, there is one thing I don't care for on the gun:
The fire selector switch. It's kind of janky on my gun. If I move it just a little to hard it goes to full auto, even though it is closer to semi on the switch. And visa versa. It's a little rough, and hard to switch. I can easily look past it for the price however.

The only other issue I have is with Taiwan Gun itself. Why didn't I know about you sooner? I have bought 7-8 bigger guns in the last year, as well as 3 pistols and I would have definitely considered you guys for most of them. I know it's on me for not researching better of course.

Last thing, I was sceptical of ordering from Taiwan Gun seeing as how the gun is coming from another country. BUT, I would do it again without any hesitation. No matter what platform you are on researching guns if Taiwan Gun is brought up, they have a rep there to answer questions directly or to get info from you to better answer. I really liked that. Most all comments regarding them are positive. Don't hesitate to buy from them if you are from the U.S. they are reputable and fair in price. I don't know about a tual customer service for issues on purchased items, seeing as how I haven't had an issue, but I imagine they will be good.

I use them to CM.041H. It works perfectly. Well designed as well.
I can recommend to anyone who use MP5.
I also can to recommend the CYMA MP5. For me working perfectly with these mag as I took from the box.

I love it, although I have to buy a lot of it because my cyma platinum cm 041 G mp5 gun empties it very quickly :D it is realistic and I like that the 130 bb is not a lot, but there is also the experience of storing it.

Amazing weapon at close/mid range, comfortable to hold and to carry. Love the design and the speed of shooting, 24-26 bb's/second, but because of this, needs a lot of magazines. Has a bit of a problem with hop-up, after adjusting and shooting couple bb's it gets down, but it can be fixed with rubber spacer, just make sure you don't tighten the screw without spacer, it can broke the part. Had one game with it, looking forward to many more, highly recomend.

I love it. I just took from from the box charged a battery for it and everything was perfect.
The RoF and the accuracy better as I expected.
The price and it's performance is perfectly balanced.
Very good deal.

The product it looks very good! I use it on CM.041J BLUE LIMITED EDITION [CYMA]t. They fit perfect and work well! Altough they are made from (very sturdy) polymer, they are very strong. Have had no single misfeed in the first testrounds!

I love this gun! The performance out of the box is outstanding, the gun looks great, there is plenty of space to mount whatever you need(optics, flashlights, etc.) and the polymer mid cap it comes with feeds great. I would definitely recommend this gun.

Feeds well, no issues so far. Nice window on the side to see generally how many BBs are in mag or if it's "full" vs "empty", which is cool. No misfeeding. I got 3 extras for the cm041g. All 3 have no issues. They are built of polymer but they are honestly pretty strong/rigid/durable. No wobble or creaking and cool decorative fake rounds in the side window for immersion.

There aren't a lot of things that I can write about this magazine. It fits perfectly into my mp5, (no wobble) it holds up to 130 bbs so it's promises are true. The material is not metal but it's pretty durable.

+The ammunition immitation looks cool.

Thanks for reading my review and I hope you will choose this magazine!

Seems like everyone else has had a positive experience with these mags.....not me. I ran into issues with the mp5 feeding fine until the mag reached half capacity. Then I would experience shots that only went out to about 50-70 feet. At first I thought it was the hop up acting up so I did everything under the sun to fix it. Some one mentioned trying standard high caps as these mid caps do not fit snug in my MP5. I switched to normal high caps and no more issues. I broke these in properly and lubed them before using them, I did this a few times. If you run into issues similar to mine try a normal MP5 high cap mag and see if the problems prosiest.

Gun shipped fast, arrived well package, and performs just as I hoped. Solid build quality, strong feeling internals, and functions flawlessly. With the short supply in the States, this gun was cheaper through Taiwangun.com by $50 even with the shipping...and it got here in less than a week! Very impressive. I've already added a red dot and ordered extra magazines. However, the mags I purchased were hi-cap, and I would not recommend those. Just stick with the mid-cap or get a drum mag. The hi-caps might hold more, but the need to constantly wind them makes them rather inefficient in my opinion.

This replica is outstanding. The look and feel of it are robust, and authentic to it's real life counterpart. CYMA currently offers in my opinion the best all around package straight out of the box for this style of replica. Offerings from other companies with trademarks need serious work, and cannot compare. The standard V2 gearbox layout also allows for plentiful upgrade potential. It shoots flat and consistent with stock internals, and has a wonderful RPS. I was easily reaching out to 150 feet with some slight adjustments to the hop-up. Cheers!

Najboljša replika kar sem jih kdaj kupil. Ob prejemu sem bil presenečen, ker je bila dosti težja kot sem mislil, da bo, ampak sem se zelo hitro privadil. Replika deluje kot mora, sicer sem dodelal na njej marsikaj in je res božanska! Replika brez problema podpira SP 130 vzmet.

To so trenutno najboljši mid cap nabojniki kar sem jih do zdaj kupil. Trenutno sem jih kupil 6, verjetno jih bom v prihodnosti še več. Uporabjam jih na repliki CM 0.41H, delujejo super. BB-je feedajo normalno, brez težav (repliko imam predelano na 31 BBs /s ).

Excellent, reliable midcap magazines! Broke in with no issues, feed very reliably, fit snugly and crisply into my CYMA MP5's magwell. Really not alot else to say about them, they are light, easy to use and an excellent bargain compared to the MP5 mags at my local army surplus! They wanted $12 for 50 bb mags! Ridiculous! Only thing I don't like about these is the large polymer molding at the bottom preventing them from fitting in standard SMG mag pouches, but they still fit in flap-closure M4 mag pouches surprisingly well, so that's not a big deal.

Makes the kit look very awsome! Rebuilt mij MP5K into a CM041L: these mags make the rebuild look great. They fit perfect and work well! Altough they are made from (very sturdy) polymer, they are very strong. Have had no single misfeed in the first testrounds!

This is my favorite mp5. Very snappy, sturdy build and packs a punch. Already tested in a skirm. It has a good range and is very accurate, i love this replica. With Cyma platinum you get the most out of a replica for an even better price!

Perfect replica, shoots accurate and every shot is exactly 1.04j without fail. Love the sound and sesitivity of the trigger.

Only thing that is not perfect is the full plastic mag that comes with the model, in comparison with the replica it feels flimsy. Not that it matters much because you can get a high cap.

These are the best CYMA MP5 Mid-caps. They have a nice stippling feel and have a cool dummy round window. It fits on my CYMA CM.041B MP5 with no problems and feeds well with no jams! I think that I will buy more in the future.

Best mags for the cyma mp5k. They feed perfectly and feel sturdy. For swordfish guns it did require some modification on the bb holding lip otherwise it wouldn't be able to click in properly. The lip has a flat head which is the peice that needs sanding.

So far, only fired a few mags through with an 11.1, trigger is snappy, extended mag release is awesome, whole gun is solid no wobbles, only realization is that the stock is absolutely tiny. But other than that amazing gun

I love these magazines feed and fit well in most mp5's.true 130 round mag. Fits in all mp5 mag pouches . No cons I can find. I love the look and feel of the magazines. I would it if they came in more colors, like tan and od green.

I bought this magazine because the original ones were no longer available. This magazine is pretty nice, but needs to be filled with a speedloader. (This is not necessary with an original). Despite the fact that the housing is made of plastic, it still feels solid and can take some beating (or a fall). Great mag, but I still prefer the metal version that came with the Cyma MP5.

I mean what can I say that hasn't already been said! It's a Cyma platinum, it's a powerhouse of an Aeg for under 300. This thing runs like a $600 custom gun, it's trigger pull is smooth as butter and it's so snappy it's unreal. Absolutely reccomend

My third ever MP5. Definitely the best one yet. It is solid, snappy and accurate. The telescopic stock was a really good addition, giving us a rear wired gearbox AND adjustable stock. As compared to older models where you either had rearwired and a fixed length stock, or adjustable stock and front wired gearbox.

Great fun when accompanied with an underbarrel grenadelauncher, a tracer unit and a drum mag.

Very good looking magazine. I use it with a J.G. Works JG069 MP5 submachine replica. Sometimes when you put it in, you have to move it a little to make it stuck in, but it is okay, would not fall out.

This review will be more technical than just "Oh fantastico, buy It!".
Let's start with the pros :

EXTERNAL

-external materials 9/10 , very good polymer and solid metal (even though It scratches easily, thats why it's not a 10)
-tolerances 10/10 , nothing to say, Just perfect
-mags 10/10 , accepts drum mags (g&g) WITHOUT modifications
-battery 10/10 , supports 7.4 and 11.1 without problems

INTERNAL

-very good torque motor (nothing special)
-12.1 gears with -4 ss (they are very similar to shs)
-8mm bearings (good ones)
-brass barrel
-stock deans
-good ariseal (bore-up stile pistone head/cilinderhead)
-QSC (Quick spring change)

Cons :

EXTERNAL

-no logos (although i like It more without)
-plastic Seat of the screws (motor grip)

INTERNAL

-grease it's made of glue (?) It's hard top remove It, too dense
-must redo shimming
-tappet plate too elastic and deformable (after a few shots it's already deformed)
-piston too heavy
-one of the worst hopups i've ever seen , the regulation isn't precise, the regulation rod it's very slack (can be fixed, but i don't know how much it can last, would be fantastic having an aftermarket piece well done)
-you Need to change INSTANTLY the mosfet because It will break after a few mags (i had/opened 3 and a of them had this problem), sad because It was a wonderful idea

How to custom it :

Change the tappet plate (V2 One) with a good one (get rid of the delayer and cut the tappet) , clean, reshim and relubricate. Put an m100 (mine was a guarder) to stay under the joule (around 0.9j). Put a titan in it , and, of all done, correctly you should have a replica that sounds like an hpa , shoots really well.

Final considerations :

Really good asg for the price , you get what you're paying for.
Stock with 11.1 you get 25bbs, After the custom you can get like 30/31bbs..get one of these instead of some fancy overpriced brand.
Recommended.

These Cyma mp5 magazines are the best MP5 magazines I have ever used. They feed very consistent and hold 130 rounds. I bought 7 of them including the one that comes with the Cyma MP5 Upgraded Version. I regret not buying 10 of them. Next order I'll grab a couple more.

This gun shot so well out the box, I was very impressed. I got to take it out this past weekend for it's first time and it shot so straight and accurate. Zero complaints and highly recommended. The stock magazine is the best MP5 magazine I have ever used. Fed consistent and holds 130 rounds. For the price you cannot beat it.

I first only had the standard metal mp5 magazines from Cyma. I really wanted a few of these because of their looks.
What I really like that you can see if the mag is fully loaded and also like halfway you can see the bb’s in The magazine. Also the weight is really light this is due that its made out of polymer but the build quillity is still great.
The only downside of these magazines for me is that the MP5 speedloader adapter from Big Dragon doesn’t fit on these. The adapter fits on the normal Mp5 Cyma magazines but wont fit on these magazines.

Great magazines. Fit perfectly into my CYMA MP5K. The brass look is awesome. They are polymer but they are pretty heavy duty and well built, good texture. Best part is when they’re full, you can see a couple BBs right at the base of the brass near the bottom of the mag. Definitely hold right around 130. Recommend an Odin speed loader.

Nice value for the money and reliable like all cyma products , only problem it is too big for most magazine pouches but that can be shorted easy , feeds fine all bbs to the last , have to say it looks good and seems fine so far in mostly hard CQB use......

Feeds great and looks awesome, one of the few midcaps that works in my G&G MP5 (albeit a little tight). Only downside is the wider base makes a little awkward to fit in some narrower SMG magazine pouches.

Great quality replica for the price. Nice and heafty feeling full metal mp5 with a mosfet that gives it a nice quick rpm. Would recommend to people whos looking for a well made mp5 replica. And one more thing. Its cheapest here in taiwangun webstore. All the other stores that ive seen it being selled at are a lot more expensive. If you are considering buying it, then you do it here.

These mid caps are great, I used them in my last game and I had no feeding problems at all. They feel very very sturdy in my hands and I feel if I were to drop them they wouldn’t break. They fit very very well in the mp5s Cyma offers in Taiwan Gun specifically the mp5sd blue edition. Great mags would recommend thanks Taiwan Gun

Great build quality, on the heavy side. Stock and mag wobble. Came with the manual for old version. It shoots very accurately and fast using 11.1v. But mine it keeps shooting to the left although the grouping is very tight

I have a old MP5 from JG and this is a must upgrade.
The metal body and external acessories makes it realisticly heavy, the trigger and the selector are great and with good travel.
The buffer tube gives you more space that you could have with a PDW and lets you chose other stocks, BUT the stock came snug on the buffertube with litle to no woble and the rubber shoulder pad its great. I did it help to make the gun heavy since it looks like the plate where the buffer tube is tighten is the base for the PDW one since it has holes for the sliding rods.
The hopup needs a bit of tunning and shimming since i can see it losing the adjustment over time with the use.
Didnt opend the gun (yet) but the sound out of the box was a bit noisy and i needed to adjust a bit the motor set screw.
The mag it cames with it very good and I will get more, they have been feeding good with no problems as recommended for all mid caps.
The top rail helps alot to mount sights and acessories along with the mlock rail.

Gave it 5 but the things i saw wrong can be from my gun and not the others.

Extra: The manuals it came with... They are old, stock from older models, and 50% dosent work for this model. There was no indications for mosfet behavior (the sounds and LED colors)

I like it over the pdw stock because you can put any stock you want over the buffer tube. Also heavier than I thought with the metal rails/handguard. Performs great but one issue I found is that the hopup gradually resets to 0 when I fire (a common issue on AK/MP5 hopups). Adding a O-ring to the screw helped a little, but in the end I had to add a metal tie to keep the hopup in place.

It does not fit in an average mp5 pocket

Nice

It does not fit in an average mp5 pocket