Silenciador Airsoft PBS-1 para la serie AK - Negro [5KU]

La mira de manera estética es impecable y realista.

Pero compromete la precisión y desvía las BBs, salvo que se utilice como cobertura de un cañón más largo.

Advertencia importante funcional. Sin cañón más largo, altera la precisión y desvía el disparo.

Recomiendo introducir una barra de metal de 6mm larga en el cañón de la réplica con el silenciador instalado para comprobar el grado de desvío tras enroscarlo.

Para partidas de airsoft recomiendo quitar la pieza de la boca, los resultados mejoran mucho.

I bought it recently and it looks good. Almost like the real thing. It's foam filled and reduces sound a bit. It's made of metal and has weight. And it's hard to break. However, the 14mm threaded adapter doesn't screw into the muffler all the way, so it can come loose inside. This should be improved.

Pros:Very good silencer, it fits well on my cyma ak105 slr, no sound whatsoever,i can only hear the piston working. It doesnt weight too much and looks good on the ak altought its a bit massive.
A bit of a con: you need to be careful with mounting it, it has the 14mm adaptor on so it will screw in both directions so be careful when mounting to make it stay put.

For people who have problems with breaking bbs at the exit hole, you should try to remove the small screwed metal plate at its neck. For me it was the cause of its misalignment, and now it works like a charm.
Otherwise its a solid construction, and I have zero problems with it.

Using on Arcturus AK12U.
Good construction, a bit heavy actually but that's fine.
My AK has a shorter thread, so if you haven't aligned the device correctly, you are going to get smashed BBs inside the device.
The device itself has a 24mm thread but it comes with a 14mm adapter.
Why not 5 stars? Personal bias, because of the BBs hitting the internals of the device. Might just be because of my replica not having a long enough thread for this but I did get to work after a lot of adjusting and cleaning pieces of BBs from the ground and the internals of the device.

High quality construction, material and really good threading on this.

I personally use suppressors for the aesthetic, not to actually damp the sound, so I removed the all of the foam rings inside (there's quite a lot of them) and the end result is a very satisfying crack and pop sound.

I highly recommend it.

This is a must have for AK SU and Bizon replicas!
They just look so badass with these little supressors.

It has 14mm CCW and 24mm CW threading.

Looks like real, almost feel like a real one. Perfect for the airsoft replicas.

Fixed on an Arcturus AT-AK06 … what a style, what an elegance !!
Quite realistic, a little bit heavy, full of foam … It is a good accessory for AK lovers, close to he a must-have, I do not regret this purchase !

For the looks and impressions it is great, but I would not recommend using this in actual competitive airsoft games, as the 14mm thread adapter does not have an option to fully screw the suppressor in, so it could potentially unscrew itself.

PROS:
-Looks like the real thing
-The foam inside does dampen the sound a little and it makes the sound way cooler and better
-It is made of metal, so it will not break easily

CONS:
-Heavy (because of the metal)
-The 14mm thread adapter does not screw in to the suppressor entirely (it could potentially get unscrewed)

Overall, a good looking and sounding suppressor. Would recommend if you are going for the looks of a suppressed AK.

I bought this for my dboys Ak74su. It fits perfectly, it has a really decent touch and it will be a good choice ig someone wants to build a Tarkov setup or hide a longer inner barrel. I absolutely recommend this supressor.

Perfect suppressor. The best russian airsoft suppressor that I have ever seen/held/tried. Its filled with foam and made my cyma AK sound amazing. It really does dampen the sound quite a bit. The build quality of this suppressor is really good, without making it too heavy. This one is more true to the real steel PBS-1 than other airsoft brands.