+48 123626134 [email protected]
Falta temporal
  • Formas de entrega

    Ingrese el país y el código postal para ver los costes de envío

  • Datos técnicos

    Para ver los datos técnicos del producto incluido en el conjunto, haga clic en el nombre

    EAN 5901698487577
    Peso 800 g
    Modelo de réplica Réplica de Airsoft HI-CAPA
    Color negro
    Material ABS
    Modo de fuego auto, semi
    Material del cargador metal
    Batería incluida NO
    Tipo de rodamiento rodamiento de bolas de acero
    Período de garantía 12 meses
    Hop up ajustable
    Munición .20g
    Número de serie SI
    Longitud 225 mm
    Capacidad del cargador 34 BBs
    Energía de salida 0.37 J
    Velocidad de salida 200 FPS con bolas de 0.20g
    Ilość magazynków w zestawie szt 2
    ETU MOSFET TAK
    EAN 889147051379
    Peso 150 g
    Color negro
    Material polymer
    Camuflaje black
    Grupa kolor 1663
    Longitud 105 mm
    Altura mm 150
  • Opiniones

    • - 20.12.2021 escribió:
      It fits perfect a Beretta M92 model: easy to take it out, easy to hold it. The retention button works well. Easy to adjust: just a screw and an allen key (included in the box). Also fits in a glock 17 model. It worths the price.
      Valoración de opinión: 0
    • - 28.10.2021 escribió:
      Funda muy practica, sujeta muy bien NUNCA se cae la replica, aunque corras o saltes.
      Esta funda es 100% ajustable para cualquier tipo de pistola y siempre quedara fija, no se mueve y tiene un mecanismo de extraccion dinamico y facil de usar.
      Valoración de opinión: 0
    • - 18.06.2025 escribió:
      Nagyszeru termek, nagyon kenyelmes, asp xtp-hez hasznalom. Kicsit jatszani kellett az allitgatasaval de kivaloan mukodik! Az elso jatekon ahol hasznaltam mar meg is mutatta hogy mennyire hasznalhato es kenyelmes, raadasul jol is nez ki! A rantas gyors es zokkenomentes, stabilan tart a tok! A szallitassal is minden rendben volt, asszem 3 nap alatt kezhez is kaptam!
      Valoración de opinión: 0
    • - 14.01.2025 escribió:
      Nice holster. Adjustable width , works fine with my guns. Only downside is that you can pull gun out if you twist it, however that shouldn't happen naturally during game play. it comes with the belt module which seems to work fine, other accessories are available like molle mount, beltclip and drop leg.
      Valoración de opinión: 0
    • - 02.01.2025 escribió:
      Easy to lose mag on field.
      Also single shot is trigger not that good.
      When using burst it does the job.


      Valoración de opinión: 0
    • - 23.12.2024 escribió:
      Great gun holster it fits cyma 125(without rail) cyma cm 126 and even novritsch ssp5(tested myself). It fits great on any belt and the pistol sita in right away and irs really good fixated.i can only recommend to buy this especially for cym cm 125 because it is hard to find a good holster for usp replica.
      Valoración de opinión: 0
    • - 16.10.2024 escribió:
      it does an excellent job! if you need, a pistol hostel this one is definitely one to concider
      Valoración de opinión: 0
    • - 14.10.2024 escribió:
      Excellent! I was a little worried that it wouldn't be compatible with my penknife, but it works flawlessly. It doesn't even wobble. It will be very good for 1911 replicas, and if the description of the replicas includes this holster as an option, then it will be compatible.
      Valoración de opinión: 0
    • - 16.04.2024 escribió:
      I bought it for my JW4 TTI, and it fits like a glove. It's a great and very durable material; taking out the pistol and putting it back in is very smooth.
      I am wearing it on the front of my plate carrier, and it is comfortable.
      Valoración de opinión: 0
    • - 29.02.2024 escribió:
      Bough it for my SSP5 and it fits perfectly, I've tried using it with different pistols and it just works. All you need to do is adjust two screws with an allen key that is included and there you go. Holds the pistol very firmly and there is no chance of it falling out. The only thing that somewhat annoys me is that whenever I holster my pistol it scratches the surface inside the holster and leaves some of that scaped surface on the pistol, but all you have to do is simply wipe it off.

      Kupilem ten holster do SSP5 od Novritscha i pasuje bez problemow. Wyprobowalem tez go z innymi pistoletami no i tak jak w opisie, pasuje praktycznie do wszystkiego. Jedyna rzecz, ktora jest czasami irytujaca, to to, ze gdy chowamy pistolet do ladownicy moze on zdzierac troszeczke materialu od srodka. Jest to co prawda minimalne zdzieranie ale moze dostac sie to do lufy. Poza tym mega polecam, bo po co kupowac milion ladownic na pistolety skoro mozna kupic jeden, ktory bedzie pasowac to prawie wszystkiego.
      Valoración de opinión: 0
    • - 06.02.2024 escribió:
      CM,128S Mosfet edition
      Plastic gun with metal top.
      Works great anytime you need it so you can rely on it.
      Few things you got to watch out while using it is that the magazine sometimes does not goes fully in even if you thing it did so you need to get used to double check it.
      Secondly the gun sometimes double-triple fires on single shot mode if you click too fast but if you already click too fast why not use full auto mode which works absolutely without a problem.
      Valoración de opinión: 0
    • - 01.02.2024 escribió:
      The `XTP XTREME TRAINING PISTOL` fits this holster perfectly. This is probably the best holster out there. Note, you'll need a molle adapter if are going to attach it to molle equipment - vest, belt, etc.
      Valoración de opinión: 0
    • - 06.11.2023 escribió:
      Mine shoots 215fp fps with .20's so performance is perfect for close quarters.
      Build quality is good.
      Only anoying thing is the "extra safety" on the grip.
      The botton on the rear of the grip has to be fully pushed in, in order to shoot the pistol. With gloves on this can be tricky.
      I just put some tape around the grip so the button stays pressed.
      There is another safety switch on the gun allready.
      All in all great buy.
      Valoración de opinión: 0
    • - 05.10.2023 escribió:
      Hello! This AEP is very good. I can only recommend. The battery easily lasts the game. The magazine slides well. The BBs fit well, they don't get stuck. I think this is a great build. What I might miss about it is that it cannot be equipped with accessories, it does not have a mounting rail.
      Valoración de opinión: 0
    • - 26.09.2023 escribió:
      nagyon jó minőség , jó ár érték arány . r32höz kíválló
      very good quality, good value for money. R32 Exceptional
      Valoración de opinión: 0
    • - 25.09.2023 escribió:
      Excelent items, verry nice and quality and fast delivery. Taiwangun it is the besst!!!!!!!!!!!!!
      Valoración de opinión: 0
    • - 25.09.2023 escribió:
      Excelent items, verry nice and quality and fast delivery. Taiwangun it is the besst!!!!!!!!!!!!!
      Valoración de opinión: 0
    • - 08.09.2023 escribió:
      Great quality! Feels sturdy!
      + Highly adjustable
      + Fits (probably) ANY side-arm (within reason)
      - May damage the paintjob on the side(s) of the slide of your sidearm, BEWARE
      Especially GLOCK-type pistols may experience damage to the paint on the corners of the slide when holstering and unhostering the weapon multiple times.
      This may be fixed with electrical tape or foam, but beware!
      Overall great product and good quality for the price!
      Valoración de opinión: 1
    • - 08.09.2023 escribió:
      I bought it for Army Armanent R 604. It fits perfectly, The lock does not allow them to fall out, but the button is easy to use. It fits you very well and you can hardly take it off. It can also be easily fitted into trousers. The holder can be rotated so it can also be mounted on the chest. it doesn't come out like that.
      Valoración de opinión: 0
    • - 31.07.2023 escribió:
      Good day! This gun is simply awesome. I searched a lot for which pistol would be the right one and I think this was the best choice. It has a very good weight and quality. I can only recommend CM. 128S Mosfet Edition.
      Valoración de opinión: -1
    • - 27.03.2023 escribió:
      Nice gun. Amazing aiming (which is adjustable) horizontally and vertically. Fast response.auto mode works fast.The only bad thing is that if you leave battery inside gun for a few hours it drains fast.
      Valoración de opinión: 0
    • - 20.02.2023 escribió:
      My only AEP so far, as I prefer GBB/NBB due to it being more powerful. However, this one needs no maintenance whatsoever in the two years I had it and always works. Be careful though, if you're looking for an exact replica that this one is way bulkier and as such looks less realistic.
      Valoración de opinión: 0
    • - 31.01.2023 escribió:
      Bought it together with ST23 NON-BLOWBACK Heavy Weight Gas Pistol [STTI] and overall great purchase for the price.Only thing to take into account that for bigger pistol replicas with silencers even after adjusting - can not fit
      Valoración de opinión: 1
    • - 29.01.2023 escribió:
      Really nice spring-based mechanism that easily adapts to a lot of different pistols sizes (I tested a G17, AAP-01 and 1911), all tested ones fit without any wobble. All you have to do is loosen or tighten two screws depending on the width of the slide.
      Valoración de opinión: 0
    • - 26.12.2022 escribió:
      I bought the holster primarily for a mk23, but it really accepts a lot of pistols. For example fn 5-7, sig p226, 1911, hi-capa, glock variants, etc. The mk23 is a bit cramped in it, but it's not disturbing. Regardless, I can quickly take the pistol out of it and don't have to strain to put it back.
      Valoración de opinión: 0
    • - 23.11.2022 escribió:
      This holster is Superb !
      Its the second being bought.
      The first one did fantastic job protecting AAP 01 as my bro fell on it(+100 kg!!!)
      The holster catch broke but the pistol was unschratched and undamaged.
      Its still holds pistol but with no catch.
      So for a small investment u protect your gear.
      Valoración de opinión: 0
    • - 17.11.2022 escribió:
      Probably the best holster available for multiple Guns. I tried 4 different ones and because you can adjust it, they all fit. Very happy with it and will buy exact same one if it breaks. Which probably won’t happen because the plastic is sturdy but not stiff and has minimal moving parts
      Valoración de opinión: 0
    • - 22.02.2022 escribió:
      This holster is my favorite out of all. I had a little bit of fear concerning the steadiness of the holstered weapon, but it is prooven that I shouldn't have done so. It is easy to adjust, comfortable and holds the pistol in place. I have a Beretta M9, but I'm pretty sure it would take also Glock or 1911 platforms. Its material is good too, I don't think it will break during any of the games.
      Valoración de opinión: 0
    • - 22.02.2022 escribió:
      Excellent choice if you have pistols. You can use an Allen key to make it more tight (for thinner pistols) or loose (for wider pistols).

      After some initial loosening, the KJW MK1 (Ruger/Nambu replica) can be fitted (though it can move a little up or down inside, but would not fall out), if you loose it more, the CYMA CM.127 (Glock 18C) and even more it is enough to put the STTi ST23 (MK23) in it, without the silencer.
      Valoración de opinión: 0
    • - 17.12.2021 escribió:
      Great Holster that fits both of my Airsoft Pistols,

      my random Amazon (probably Umarex) M9two Spring-Pistol, and my Cm.030 G18C. First couple of times, getting the Gun of the holster is tough, but you will get a feel for it, and it gets easier.

      Cant go wrong with this one, if you own a CM.030.
      Valoración de opinión: 0
    • - 15.12.2021 escribió:
      What a great thing! If you are using multiple handguns this holster can hold -almost- all of them! Fit: Glock, Hicapa, Beretta, ICS BLE, aaaaand even AAP01 very well! Plus you can attach to any plate. In short excellent product, I would recommened to anyone!
      Valoración de opinión: 0
    • - 14.12.2021 escribió:
      This is a solid Product. Simply adjust the width of the hole with the two screws to the chosen pistol and it fits.
      There are plastic leaf springs in the holster to stop any wobble of the pistol and adjust to any pistol.
      It worked good with the AAP01.

      The included belt paddle works fine with battle belts of any kind.
      I have a battlebelt with molle, and you just have to loop the normal belt over two molle slots and the paddle fits solid.
      Valoración de opinión: 0
    • - 10.12.2021 escribió:
      Very happy with this. Fits my G19, hicapa, and AAP01 with a good snap. Does not fit the Mk23 or the 6" revolver, but that shouldn't come as a surprise. Paddle holster is stable and can be swapped out.
      Valoración de opinión: 0
    • - 22.10.2021 escribió:
      Great holster, easy to adjust to fit many pistols. I use it for my ICS KORTH but I have tried it with other pistols too. You adjust the fit of the gun by turning the hex screw on the side with the hex key that is provided wich is much appreciated. Fits well on a belt.
      Valoración de opinión: 2
    Añadir una opinión


Directrices de seguridad y uso

Lea la siguiente información para un uso seguro del producto:
SKU: · EAN: - · [Set] CM.128S EDICIÓN MOSFET [CYMA] + Per-Fit Holster for more than 80 handgun models - Black [Amomax] ·
Notificación de problema de seguridad · Persona responsable y fabricante
Persona responsable y fabricante
Persona responsable de la introducción del producto en el mercado de la UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polonia · [email protected]
Fabricante:

LAS REPLICAS DISPONIBLES EN TAIWANGUN.COM PUEDEN SER COMPRADAS SOLAMENTE POR GENTE MAYOR DE EDAD. PRODUCTOS DESTINADOS A ASG Y JUEGOS TÁCTICOS SOLAMENTE

¿Preguntas? Estamos encantados de ayudarle. Envíenos un correo electrónico a través de [email protected]
* Los precios incluyen el IVA, sin incluir los costos de transporte.