![A.E.G spring 130 m/s [Guarder]](https://www.taiwangun.com/img/imagecache/9001-10000/99ce809e120383c788c9fa1c2f049e036d92c200.webp)
A.E.G spring 130 m/s [Guarder]
Artículo no disponible
¿ Cuando el producto esté disponible ?
-
Formas de entrega
Ingrese el país y el código postal para ver los costes de envío
-
Datos técnicos
Fabricante: GUARDER código: SP-130 EAN 4711225799353 Peso 25 g Material acero Longitud 172 mm -
Opiniones
Añadir una opinión-
- 26.10.2021 escribió:Guarder, una marca excelente a la hora de mejorar o reparar tú replica, a un precio razonable, desde mas de 10 años que la conocemos y la usamos entre los players de mi team. Cien por ciento recomendable.
-
- 24.07.2026 escribió:I believe it has a slight break-in period since it fired at 2.5J when brand new, but it eventually went down to 2.1J for me (without hop up applied). That is very accurate to the rating (130m/s with .25g BBs) but just be aware that you need to fire a few hundred shots or leave it pre-cocked to break in the spring.
Otherwise, solid spring that doesn't have any bouncing or "twang". -
- 10.03.2025 escribió:Odpowiedź sklepu:Not accurate description with this spring my Cyma Ak went from 1.4j to 2.3j.!!!
Its not m130 maybe m150 not sure.!!!
After i cut 2 coils it gave 2.1j.!!!
Sp130 is not m130!!!
Now i need to order new spring!!!...I am sorry to hear that you are not satisfied with the product, the spring is only one of the parts that influence the power of the replica. It depends of the pneumatics, and lots of different variables. This is why it's so hard sometimes to adjust the right spring to the whole system. Sometimes it's the best solution to contact our techs directly before placing the order to consult which spring would be the best to reach the desired power.
I will contact you via email and try to resolve the issue to your satisfaction. -
- 29.10.2024 escribió:Ive never struggled so hard, but now that i have gotten the spring into the aeg, it shootin hella hard, and combined with my new maple leaf Rubber and barrel, its a laser, shootin far over the bending of earths curvature.
-
- 02.09.2023 escribió:I am completely satisfied with it.
-
- 05.04.2023 escribió:An exelent spring! It's a bit hotter than M130 (it's equivalent to a SHS M140); if it's too strong for you, just unclip a few coils of the front end. A bit expencive, but they are the best springs in my oppinion
-
- 14.03.2023 escribió:This spring model is the best I have ever tried. This one made my specna arms M4 reach 2.2 joules so it is a little hotter than the description says, but it fits my needs perfect as a DMR spring. Remember to have the compressed coils in the rear.
-
- 07.02.2023 escribió:Mine came in a bit hot but its a great quality spring that kept the old ROF and trigger response while upping the power of my LCT lk33. It came out a bit hot from the get go but after cutting one coil it settled very good and consistant at 1,7 joule
-
- 15.12.2022 escribió:This spring shoots consistently 2.27 joules on 0.30-gram bbs. It works great in a DMR setup. Might be a bit much for a normal assault build as it might break some parts in the replica. The piston teeth might give out 1st.
-
A.E.G spring 130 m/s Guarder
Spring SP 130 Guarder with an uneven pitch AEG tuning.
Both ends of the springs are polished.
Compatible with AEG Facilities, except PSG-1.
Equivalent to 130 Systema.
Installation of the spring provides power outlet between 420 up to 450fps (muzzle velocity is dependent on other parts mounted in the interior of the gearbox).
Spring SP 130 Guarder with an uneven pitch AEG tuning.
Both ends of the springs are polished.
Compatible with AEG Facilities, except PSG-1.
Equivalent to 130 Systema.
Installation of the spring provides power outlet between 420 up to 450fps (muzzle velocity is dependent on other parts mounted in the interior of the gearbox).
Directrices de seguridad y uso
Este producto cumple con todos los requisitos reglamentarios. Requiere montaje profesional. Solicite el servicio de montaje en Taiwangun o consulte los materiales a continuación. Advertencia: contiene piezas pequeñas, no apto para menores de 14 años.SKU: SP-130 · EAN: 4711225799353 · A.E.G spring 130 m/s [Guarder] ·
Notificación de problema de seguridad · Persona responsable y fabricante
Notificación de problema de seguridad · Persona responsable y fabricante
Persona responsable y fabricante 
Persona responsable de la introducción del producto en el mercado de la UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polonia · [email protected]
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polonia · [email protected]
Fabricante:
LAS REPLICAS DISPONIBLES EN TAIWANGUN.COM PUEDEN SER COMPRADAS SOLAMENTE POR GENTE MAYOR DE EDAD. PRODUCTOS DESTINADOS A ASG Y JUEGOS TÁCTICOS SOLAMENTE
¿Preguntas? Estamos encantados de ayudarle. Envíenos un correo electrónico a través de [email protected]
* Los precios incluyen el IVA, sin incluir los costos de transporte.