[Set] Réplica CM.099 [CYMA] + Cargador V3 + para LiPo / LiFe 2S / 3S [IPower] + Batería Li-Po 1400mAh 11.1V 20C - Stick [IPower]

Cargador para batería que aún no he podido probar. Viene bien envuelto por lo que parece en perfecto estado. El envío por parte de Taiwangun muy rápido, llego con UPS un sábado antes de lo previsto, por lo que muy contento con eso también!

Muy buena replica.
Peso adecuado, disparo fuerte y preciso.
Materiales de calidad.
La culata aun no siendo estilo madera da el pego y guarda la batería muy bien ajustada cerrada por la cantonera.
Toda muy ajustado y sin holguras.
El envío según lo prometido y muy bien envuelto,
Ahora toca buscar una buena mira.

Es una replica bonita con buenos acabados
con un precio muy competente sin embargo la falta de cargadores dado que no parece que cyma fuese a re estocar pronto los mismos

se puede optar por la versión de king arms para los cargadores que con una ligera modificación son compatibles

a nivel de rendimiento la replica no se queda atrás
la mía llegó a 1.56 julios y el limite en españa al menos 1.88 por lo que aún hay margen de mejora si uno quiere

a nivel de precisión cambiar el cañón por uno con buen acabado tipo 6.02 de 433mm u 450mm si lo encontráis , eso con una buena goma y no requiere de mucha más para que sea un dmr más que competente respecto a otros competidores

El arma es bastante solida, se siente muy bien a la hora de empuñarla, en base a la precisión del arma la verdad es que me dejo sorprendido, para el precio que tiene es una creo que es una muy buena replica, bastante satisfecho con el producto

COMPRE ESTA REPLICA EN ESTA WEB Y EL SERVICIO FUI MUY BUENO, PEDI QUE PONGAN LA POTENCIA PERMITIDA EN CAMPOS DE JUEGO EN ESPAÑA, LO HICIERON BIEN, LA REPLICA FUNCIONA BIEN, SOLO QUE TIENE ALGO DE HOLGURA EN EL SILENCIADOR , EL RESTO ESTA BIEN, AHORA BUSCARE UNA MIRA PARA ESTA REPLICA.

La replica llegó perfecta dando 1'74joules muy estables con 0'33. Alimenta perfecta, la goma del hopup hay que cambiarla y el nub porque no hacia hopup y no levantaba las bbs, una vez cambiada sin problemas.

Gracias a CYMA tenemos la oportunidad de disfrutar de una réplica tan icónica como la VSS VINTOREZ y con unos acabados realmente increíbles.

Es cierto que su culata no es de madera, pero el diseñado por la marca fabricado en polímero tiene un tacto que sorprende y sobretodo, gusta y mucho.

En cuanto a su rendimiento en juego, tenemos una réplica de grandes prestaciones, con la cual nos hará conseguir el objetivo que nos hemos marcado fácilmente.

Si deseas tener un DMR diferente, la VSS VINTOREZ con un estilo único o sencillamente de una réplica con la que disfrutar del airsoft con mayúsculas, la CM 099 de CYMA es tú elección.

Producto de mala calidad no funciono. Conecte varias baterías Lipo en la función para este tipo de baterías y empezó a emitir ruidos y no cargo las baterías
Preferí no arriesgar las baterías y no seguí cargándolas y haciendo pruebas eso este monten estoy esperando el reintegro del valor del producto. Lastima por que necesitaba el producto para cargador de repuesto.

Cargador para batería que aún no he podido probar. Viene bien envuelto por lo que parece en perfecto estado. El envío por parte de Taiwangun muy rápido, llego con UPS un sábado antes de lo previsto, por lo que muy contento con eso también!

Hola, compre la Cyma 099, la réplica perfecta, impecable , sin un rasguño, buen embalaje, cumple con los fps que describe, en mi caso 410 ya que la quiero para DMR, en el juego muy fácil de empuñar y apuntar también perfecta para campos pequeños por que es maniobrable y mi envío fue hasta Gran Cañaría, muy recomendable comprar en Tawaigun.

Really glad I got this charger! It makes charging my LiPo batteries super simple and worry-free. The lights let me know exactly when the battery is ready to go, and it charges pretty fast too. A must-have tool to keep your gun running all day!

Chargers came with a solid cardboard box and with a power cord. Very easy to use and charges batteries very fast.
Used it 2 times so far, I’m okay with the product.
Would recommend for any beginner.
Only downside is that it’s not capable of taking the batteries to “storage” mode. Other than that it’s good!

An essential tool if you are switching to Li-Po batteries. It's very simple to use: just plug it in and wait for the LEDs to turn green. It feels safe, doesn't overheat, and the compact size makes it easy to throw in your gear bag.

Got my hands on the Cyma VSS - that's a decent starter as a DMR option. I would say that I chose it mostly for the looks and authenticity, but the stock build is very decent.

As most mid Cyma replicas - re-lubing and re-shimming is a must. Mine also lacked air compression that I've fixed with fresh o-rings and nozzle (also with o-rings). But I should point out that the nozzle and gearbox are bit different from generic AKs. Nozzle is 19.5mm, but 19.6mm fitted in mine

It also need a proper ETU with Mosfet that will support the usage of 11.1v batteries, since you will definitely want a quick trigger response - I would really recommend placing the Perun V3

Stock motor works fine even with both M130 and M140 springs (but consider that you will probably need to change the gears for that for stronger ones)

But, overall, it's a decent AEG DMR in stock variant and a great base for building a high-performant one!

The replica works fine stock, 1.2J out of the box.
It feels sturdy and i had no problems on the field.

However today i got the SVD rail from cyma which is supposed to fit on this gun without problems and as soon as i pulled the lever for the centering pin the bottom of the dovetail mount broke off the gun.

So if you want to run this with ironsights its a good gun without issues (so far).
But the dovetail is very fragile so i can't recommend it if you want a rail on top.

The charger make what he can! I used twice until when i buy that. I tink this is a good product for this price! The charging time is common. I recommend it to beginner players who dont want to invest a lot of money in the game at the beginning.

MY childhood dream was a VSS and now i can afford it, so i've bought one.

Pros:
-fully metal
-feels heavy, it's almost 3kg with no mag in
-fast spring replacement system
-awesome accuracy
-1.55 Joule with 0.28BBs out of the box
-not the cheap plastic feeling on stock and handguard
-hard to break, everything on it's place

Cons:
- after 4-5 games i've noticed it doesn't wanna fire semi sometimes
- with an almost empty battery it jammed on a point where i couldn't shoot even with a replaced, fully charged, so i had to remove the spring and make the cycle of gears manually end
-the iron sight is hard to adjust, but it's not a big mistake, since this gun is a weaker DMR category, so Optics needed
-hard to find spare mags, you can buy it on taiwangun too (god bless you guys)
-it likes only one specific side mount, tried four of them, but only one fits, you can buy it on taiwangun too (god bless you guys)

I personally love the vss vintorez and I am happy to say that this airsoft replica is an absolute beauty and has good weight and feels sturdy aswell, wich isn't surprising when one notices how much metal there is on this for the stock and half of the body most is metal and makes this replicate very nice

Absolutely amazing rifle! The chassis is made out of robust materials, specifically aluminum. The weight is really close to the real deal. The plastic used is really high quality so the stock also feels robust and well built. The trigger is snappy, the gearbox is reliable and it delivers outstanding performance. I get around 430-442 FPS straight out of the box with 0.25g BB's. The magazine attaches nicely without much play if any at all.

Only complaint is that it's recommended to run a dedicated scope which will run you quite a lot of resources.

Otherwise highly recommend it!

The barrel wobbles out of the box, the body is made of cheap aluminium, and the dovetail mount was very stiff and I could hardly mount my scope on it, and it also broke before I could even take it to a game.

Very cool looking gun, I had no problems for now and the attachments stay great on it, range on it seems good about 40m no problems. The only problem I had was with battery never charging full but i could atleast 5 6 mags of 330 untill it run off.

As usual top quality, fast delivery and good prices. I bought multiple items, two replica's and a few magazines, no complaints!
Especially happy with my new SR25, out of the box a very good gun.
Happy to buy here again, and again,

It perfectly fits for a Cyma SVD and I think under the AK dustcover also. As a battery it can't do anything special, so just works well.

Very good battery for the price paid. I've change the plug to deans. Be aware that for AKs it's not the best option. Go for a super slim to ensure perfect fitting. For my M4 (battery on the stock) works nicely. I can now play a full morning without changing battery.

The fire selector is not the best first time I took for a game it got stuck in full auto.
Please try it when it comes from retailer but I fixed and now it's nice.
Amazing gun stock, more a niche and now this shop has the mags for this particular replica.

Loving the gun, it works very well and is getting great performance out of the box, and Taiwangun's while it took quite some time to get the package shipped because of the time i ordered, shipping time was very short overall, and i don't blame Taiwangun for the length in the shipping.
I am overall quite pleased

I ordered the replica with 320fps and sadly when the TG tech reassembled he pinched/damaged the wiring and the replica was not working properly. I had to get the replica rewired because if I would've sent it back it would've taken weeks probably.

@Brendan
Another problem I noticed is when pushing the selector too high up in safe position the selector plate won't move anymore and the replica only has "safe-full auto-full auto" without semi. To fix this you have to push the selector plate to the right so the gears can engage it and improvise a stopper so it won't go too far to the right.

Since there are no Cyma mags in stock I ordered 120rd midcaps King Arms that need some dremeling but they fit and feed lovely.
(search youtube: Cyma CM.099 With King Arms Mid Cap Magazine How to Tutorial)

This replica has Quick Spring Change! It's not mentioned anywhere in the description but to my surprise the newer versions have it.

I installed a Blitzkrieg mosfet and with 11.1v LiPo it shoots really well and haven't had any issues with it.

This gun definitely shows the CYMA AK quality and I really would recommend to anyone looking for a VSS. But before buying a VSS/AS, please understand that the gun is a giant suppressor, and suppressors are heavy as heck. This gun features light weight polymer and stamped steel, but the full 13.5 inch suppressor is solid steel and will hurt your back after long travels or engagement. The awkward weight balance and sticky rubber buttpad prevent be from even remotely offering this as a cqc option. However, this is a great dmr.

The batteries I bought were slightly too big so I drilled a hole in the stock and cut one in the rubber to allow the battery to be run outside with the internals sealed, which is what I would recommend to anyone else buying this gun. I prefer my method over choosing a low capacity, smaller battery, or opting for a stick type nimh like the one included. The battery compartment in the stock is absolutely tiny, you may have trouble finding any batteries that fit.

My VSS however, has no semi auto, both modes on the fire selector (down is supposed to be semi, and middle auto), fire in full auto and I honestly have no idea why. I dont mind this "feature" however, because if I need semi, I can js quickly pull the trigger to only fire one shot. This uses a 3 position fire selector like a standard ak, unlike the real steel VSS/AS.

This is one of the best quality guns you can get at this price point, I am in love with how it feels and performs. My personal choice for a rifle under $200.

Best price works great can recomend hold good charge fits great.

Very good replica for the price,whats not to like? Played a game with it, mounted a scope on the svd side rail mount, it was a bit of work to fit it,didnt go all the way because its too thick,but it doesnt come off easy so its working good. With 9,4v battery provided in the box it shoots really good and accurate on 40-45m max with 0.3 bb. I like it and will upgrade it a bit

Ez egy nagyon jó kis töltö teszi a dolgát. Aránylag gyorsan is tölt. Jó a minősége söt nem is kerül sok pénzbe ez a töltö! én azt mondom ha bárkinek kell valami olcsó és jó akkor ezt a tőltöt ajánlom. Én teljesen meg vagyok vele elégedve nekem nincs vele semmi gondom teszi azt amit kel neki. Csak ajánlani tudom!

This is a great base for people who are looking to build a budget DMR. The reactivity is already pretty decent with the battery it comes with so you can already field it out of the box. Just make sure to clean the barrel and use the heaviest bb you can hop. For my upgrades, I'm planning to add a Perun ab++ mosfet and set it in DMR mode + precocking, combined with 11.1 lipo and SHS 13:1 gears + shimming to get good reactivity. For accuracy and range I'll be using a stainless steel barrel that fits with an maple leaf MR bucking 70°+omega nub. The cylinder head and hopup unit are proprietary so i'll keep those stock. Also going to "fakelite" the stock for the look since I can't get a wood one. Can't wait to finish the build and put it to the test :D

Works perfectly. Very simple charger - you just connect the battery and it charges.

Be mindful to have the bottom switch in the proper position for charging your battery!

I also advise getting a proper measurement device to check the status of your batteries. You can do that with a multimeter, but a dedicated device is about 5 Euros so do not cheap out on it. The charger does NOT show you any info!

Works as intended, fast charges my batteries, never had any trouble at least for now. Build quality is not too high but that is to be expected for a product that costs less than 15 euros. All in all I consider this a good purchase

All in all the cyma vss is a externally beautiful and performant replica. The package arrived quickly and in great condition but upon opening the replica the outer barrel was slightly loose and rattling, the standard spring was also missing as I got the free spring downgrade and they claim they included the replaced spring. Fixing the loose outer barrel was a simple process of tightening two hex screws and while the original standard spring is mixing I did not need the higher fps but would have appreciated the option all in all good first experience with taiwangun.com and this unique model of replica from cyma

The replica feels sturdy and good, and shoots really good out of the box.
The hop up has a little screw that can be tightened when you set the hop so it doesn’t lose hop over time.
Only cyma mags fit in it so keep that in mind.
If you want a rail mount on the gun i would suggest the SVD mount that taiwangun also sells cause that one is on the middle of the gun.
All in all a really solid replica out of the box and i would recommend it.

I have been using this (vss) replica for months and I can say that is is pretty solid and performs well. I ordered it because I wanted a dmr that I can use it outdoor. The shooting range is between 50 and 60 meters with .25 bbs. The whole replica is made out of (high quality) aluminium and nylon. The gun shoots consistently and the hop up is working well too. I recommend using it with a holo sight because it worked me perfectly. The replica has a dedicated v3 gearbox which just works properly, I had no problems with it so far. It shoots around 435 fps out of the box and about 20 rps. The internal part are high quality. To sum up this gun is pretty high quality and it is well put together I can only recommend it if you are looking for a Dmr.

Really nice replica! Nice solid bild no wobble.
Will upgrade it to a dmr with new internals.
A ak bracket Will fit to use for a scope mount.
Why i give it 4 stars i because of the fire selector internals wich is made out of plastic instead of metal wich makes quite easy to break..

I was very excited to get this replica, and it lived up to all of my expectations! You get an absolutely solid replica, there are no movements or any play on the gun. It shoots great, both distance and accuracy wise, truly impressing out of the box. I tried using it with 0.28 BBs, but I will switch to heavier for the upcoming games. You should use it with at least 0.30s to achieve the full potential of the rifle.
The side mount CAN fit rails designed for AKs, but the optic will be offset significantly to the right.
I'm satisfied with the rifle, it's extremely good out of the box, but also good for an upgrade base.

prima en solide airsoft wapen makkelijk dat de batterijen in de kolf kunnen , hopup is niet de standaard ak versie ,ook wel handig dat er een snelwissel systeem op zit om je veer te vervangen om je fps aan te passen

it is a really good charger it charges the batteries really fast and it doesn't destroy them, i like it very much, it is cheap and good of course you have to watch it and don't overcharge the batteries but that's the case with all of the others. I recommend it because it is cheap and reliable

I got what I expected, a cheap plastic charger.
It is very light and hollow inside.
It's not terrible but it's not good charger.
This is a cheap charger and I got what I expected. The charger is made of plastic and is hollow. I recommend it to people who don't want to use the battery for games.

The cm.099 ore VSS vintoez is a rifle I dreamt of fore very long time and this one is very good fore the price especially when my planes is to convert it to hpa in the next year but ti's a solid gun out of the box shutting extremely accurate fore being a stock gun and like I told before Taiwanguns have unbeatable prices of there products

Very good relpica, feels good in hand with soild build, mags fit nicely, very good trigger response, high quality constuction, comes with high cap mag and battery with charger, perfect for mil-simwould recommend

First of all this is a pretty good replica out of the box. I have already shot a couple hundred rounds and it is pretty consistent and has no probles. All in all I think this is one of the best vss vintorez replica on the market.

Great and cheap! So fricking fast! I was so surprised :D It only took like 1 hour? idk, but it was fast. Greatly recommend this product! And of course Taiwan gun ships very fast. only took 2 days :) very happy, thank you Taiwan gun.

One of the best replicas of VSS Vintorez.
Good rate of fire on auto.
High velocity.
Accurate on single even without optics.
Reliable battery.
Best option for DMR on his class for low price.
Definitely good work from CYMA, and a good replica for your collection.

I just obtained this replica. Its a beautiful master piece. Especially for the price. The trigger response is very quick at this price point. I would almost expect there to be a mosfet in it. The only downside i have with it is that the dust cover is able to be forced up and down a little bit. But for the price a very solid replica!

I got this replica in order to make a DMR build. Out of the box it will not have a perfect performance, but I'd say it makes for a decent platform for upgrades.

It's relatively light and comfortable to handle. The stock leaves plenty of room for a mosfet and I managed to fit a 1450Mah 11.1V lipo.

The piston has only 1 steel tooth, which is a major weakpoint, but the spring guide is metal with a bearing (unlike a plastic one I've seen in an older disassembly video).

I ordered a 430 FPS version which should have put it at 1.7j energy. However when I chronoed it at home it outputed at 1.5j. After a bunch of tinkering and upgrades to the airseal and stiffer spring, I got to consistently shoot at 1.58j.

Verdict: If you plan to upgrade this, it will probably work for you. If you want an out of the box DMR precision, you will probably be left disappointed.

You can also fit the Cyma AK rail mount to the VSS.

A large replica; definately larger than I had expected. After adjusting the hop-up, this replica shoots great. Mind you, the CYMA midcap magazine doesn't feed well without soem minor adjustements (adding ducktape)

The Gun is perfekt shoots where you aim i played my first game with it it was perfect i recomend it alot it shoots 60 meters straight if you know how to use it it is perfect 5 out of 5 recomend it alot

When it first arrived it worked perfectly, after about 300 shots the gun stopped working. But I said no problem it can happen, so i sent the gun back. After a lot of arguing with support i managed to get the gun to them so they can fix it. I even had to pay for shipping myself. But things like this can happen so i didnt mind. When i got it back on march 10th i shot around 50bbs and it worked very good, the next day (march 11) I had to align the sight and i shot around 100 maybe 200 bbs and the gun just stopped working.
With the gun I also ordered the SVD rail which was supposed to fit on the gun. When I tried to put it on the gun it just damaged the exterior and the rail couldnt move anymore.
The replicas build is very good but the internals are bad and talking with support is very hard because their phone number doesnt work and the support mail team responds only once per day.

I bought this gun, It feels perfect, weight is good, looks perfect, i shot 2 magazins with it then it just stop working the gun makes a sound like an electric drill but it wont shot out the bbs, i checked there isnt any bb stucked inside, the problem will be inside the gearbox. Maybe it works perfectly for someone else but not for me, maybe im just not lucky.

Bonne réplique qualitative, acheter avec le pack chargeurs fait large le taff faut juste réduire un peu la puissance et ça passe en sniper/DMR.
Le support de viseur passe très bien sur la réplique également !

The first impression out of the box is that it is a cheap product. And it really is.
The charger is made out of the cheap plastic, it's very light, hollow, and something rattles inside the case.

I wouldn't mind any of the previously mentioned stuff if it worked fine, but for me, it doesn't. Charging was fine for the first few times, but after that the same thing happened as mentioned in the previous review. You plug in the battery, and it never charges completely, the LED is red all the time. I tried it with three different batteries, and it's the same case with all three (another charger charges them without any problem).

As with other cheap Chinese products, the price is very good, and it might work just fine for you, but there is a real chance it will not, and I don't think it's worth a risk. Better quality chargers are available for not much higher price.

I bought this for my cyma cm.040D (ak105 replica). It is a bit right to fit but I managed to get it done. It runs with stock internals really well, great trigger response and fire rate.

Stoped working after first two times. ;( Also hapened to my friend.
Maybe tehere is some factory defect, i was charging, usual lipo stick bateries.
Indiciator shows empty all the time.
Hope to hawe some answer from you guys, also wrote at e mail.

I can only recommend this replica, it has really quality externals and internals. The stock wiring is a huge plus, you can easily fit a regular Ak type battery in it. Also a positive thing is that you can easily upgrade because of the V3 gearbox inside, so it is a good dmr base.
If you wan't to get more information make sure to watch my review on youtube:
https://youtu.be/g3pReUFhwYo

Gun shoots great only downside is the cylinder head being exclusive to this. Mag feeds great and gun feels absolute solid. Shipped fast and in great packaging. Out of the box the trigger is snappy selector plate skips full auto easily but I personally only use semi.

Great gun out of the box, the barrel woobles a bit, and the piston head rubber is just a bit small so it doesnt compress air well but its fixable with a new rubber seal.

This item is simply amazing, I was very happy when I bought it. I thought it wouldn't fit or I wouldn't like it, but everything turned out very well. I really regret not buying it earlier. Now I always like this thing and I will never leave it. At this price, it is very, very worth buying, believe me, it will really fit you and you will like it. I highly recommend you buy it, and buy it as early as possible before others buy it, because it won't be available. Buy as early as possible, because mine and your last airsoft game will be simply the best, believe me!!!

The replica arrived perfect , this count also for the maple leaf inner barrel, the hop up and the low cap mags. The disassembly of the rifle was quite easy to pursue since it doesn't have all that screws and stuff. The rifle is perfect, nothing moves like it shouldn't, the mags feeds perfectly.

Truly a great battery charger for the price! But expect some "cons"...

The charger came in a generic carton box, the unboxing experience was really basic, but for the price it's not an issue. Included in the box was the charger, the 2 pin EU cable and instructions.

The Charger itself is made out of what seems to be an injection molded black satinated ABS plastic shell with on top 2 output LEDs, air vents for heat dissipation and a vynil sticker with the name of the charger. On the front side there are 2 ports, a three pin and a four pin one, on the back side there's the AC 110-240V cable port. On the back of the device there are 4 silicon rubber feet, the VERY IMPORTANT MICRO SWITCH that is used to select which type of battery you're charging and a vynil sticker with the informations of the device. The cable is decent quality too.

The IPOWER V3+ Battery Charger has 800mAh max charge current, meaning the microcontroller will manage the charging of the battery cells accordingly to their current level of charge. It will then deliver the right amount of current ranging from a few mAh to a maximum of 800 mAh. This means more battery life but also that the true average charging current is less than 800mAh, just keep that in mind! The charger supports 2/3 cell batteries and can charge only one at time.

The power LED is green and always stays on when the device is connected to AC. The status LED on the other hand has different color codes (Red, Red blinking and Green), meaning the microcontroller is somewhat enough intelligent to detect malfunctions and stop charging to prevent damage and tell you what's going on. In general the charger is not too noisy and the heat dissipation is enough.

But then, where are all the cons? For the price that's surely a bargain, but still...

The charger is poorly built. The plastic shell is decent quality but the charger really feels "light and empty" with very small internal support. That said, if you plan to take it with you it's surely better if you protect it or it could easily break.

Another thing that makes me "wonder why" is that the switch is under the device, meaning you can't easily see it. If it accidentally changes position it could be very painful for your battery... Be careful and always double-check it before charging!

In addition, if lightly shaked my unit sometimes emits a clicky noise (like there's something free moving inside) and have a misplaced rubber foot that is surely going to detach soon. Not to talk about the fact that the cable is just slightly bigger thant the port, so to attach it you really have to push or it won't go. But still, after pushinf it with some force the device managed to charge my battery in just a few hours without any problems!

Overall this truly is a 4 star charger. But that doesn't mean you shouldn't get it! For the price I don't think you could expect or want more, for some people in fact the important thing is just the internal hardware... And it seems like that the IPOWER V3+ decided to put all the budget for the electronics inside, which could be all you need if you want to buy a cheap charger that gets the job done and has a good microcontroller. Tho i wouldn't reccomend it too much if you travel much! Anyway i'm very happy with it as i am the first kind of person ;)

Good product in case of price and quality. I can't say anything special or critical. The batteries are charging properly, there are no breakdowns or problems. If you are saving money and need a stable and efficient lipo battery charger, then you can buy this product without doubts. Moreover, the Taiwangun shop has not yet disappointed with its products and this charger is suitable for both beginners and advanced players with a limited budget.

Good and solid external,inside is v3 gearbox except cylinder head which is v7(nozzle is not in center). Inside is standard motor with standard cyma gears(which are pretty strong),not good compresion and too much grease. Solid short ak nozzle. For dmr build pretty solid base.standard cyma svd scope mount is compatible

I've only used the charger once and it seemed to work fine, but the cable it came with did not fit the charger, meaning that the plastic was too thick. I fortunately had the necessary cable, but I am quite disappointed that the cable provided did not work.

Good quality replica. Very fast delivery. Very accurate replica worked very well right out the box. Can be recommended. Hopup is easy to adjust. All the fuctions are easy to use and good quality for replica.

Well made cyma gun very sturdy and strong. Precise and have a good range.
But the mags are teribel easy to broke and the magfeed is not perfect. I love the trigger response very fast and force full. You don t have much space for the battery.

Well made cyma gun very sturdy and strong. Precise and have a good range.
But the mags are teribel easy to broke and the magfeed is not perfect. I love the trigger response very fast and force full. You don t have much space for the battery.

V3+ CHARGER FOR LIPO/LIFE 2S/3S
A good balanced charger. Charges the battery in about an hour and has a good light indication when charging and reaching full battery capacity. I use to charge a battery type BATTERY LI-PO 1300MAH 7.4V 20/40C

Ein gutes ladegerät um den preis ist preisleistung top. Hab mir gleich paar akkus auch bestellt damit ich alles auf Lager hab. Nach einigen stunden laden wir es bisschen warm aber werden andere Ladegeräte auch villt bin ich da zu sensibel.

très bonne réplique ! Reçus un peu en retard mais pas de la faute de taiwangun :D le plus important est que le paquet était super bien protéger et ça c'est un excellent point !

Bref la réplique est très bonne, la batterie et le chargeur fournis avec fonctionne correctement.
Les seuls défauts seraient le chargeur high cap que je n'aime clairement pas (soit hs soit je l'utilise mal XD ) et le grip arrière qui a l'air super fragile et trop léger par rapport au poids de l'avant du fusils.

Voila sinon bonne et très belle réplique

Perfect price-quality ratio. Easy to use it, good "how to use" manual for it. Fast charging, I use with 1800mh accumulators. Made from normal quality plastic material.

Charges up the batteries in good time. Works as intended.
The power cable could be a little bit longer since its a little short i have to run an extension so i can charge my batteries safelly on the table

Very good charger. Had no trouble so far. Very clear instructions on how to use. Charges very well and very fast. Very compact, so you can take it anywhere you go to. Charges LiPo and LiFe, so that comes in handy.

V3+ Charger for LiPo/LiFe 2S/3S . Well nothing much to say pretty decent charger. It server purpose. You have led indicator for charging and charged battery. It's really small and compact, doesn't heat up when charging batteries.

Bought one and used it for charging the "Battery Li-Po 1450mAh 7.4V 20C".
Works like it should be.
When the battery is charged it will show a green light. charging won't costs that long of a time and it's balanced.
Price/quality is worth it!

I bought one of them. Simple and fit for purpose, this is my first charger. I'm charging him a 1450 battery. It will charge in about an hour. I haven't noticed any bugs yet. If it lasts a long time, I’ll definitely buy one or even more of it.

One of cymas most sturdy replicas. Offer great range, barley wobbles and is properly air sealed. Only downside is the magasines. They are hard to fit in if you stress reload. It's easy to miss with the magasines thooth. Otherwise I'm very happy with this gun