[Set] Réplica CM.045 [CYMA] + Cargador de 150bb para AK74 / AK-105 - Negro [CYMA]

Los compré junto con mi replica CM040c de Cyma (AK-74M) porque prefiero usar midcaps antes que el hicap que incluye mi replica por no estar dándole todo el rato a la ruedecita para que alimente, suena como un sonajero y que además no me parece realista un cargador de 500 BBs y disfruto más jugando con estos midcaps de 150... Y que puedo decir de ellos ? Alimentan que da gusto y de todas la veces que los he usado en partidas domingueras que ya van varias, no me han fallado ni una vez. Por este precio de 7 euros cada uno la verdad es que me parecen una maravilla su calidad pues parecen bastante resistentes/sólidos, lo suficiente como para estar tirándolos al suelo una y otra vez cuando recargas el arma. No he tenido la oportunidad de probar los similares cargadores de E&L pero si que he oído que estos de E&L no son tan buenos como estos de Cyma internamente hablando, haciendo que den problemas de alimentación. Resumen: si quieres cargadores en color negro de AK-74 para tu replica eléctrica, probablemente estos sean los mejores. Económicos, fiables, duraderos y al no usarse calibres reales se adaptan a prácticamente cualquier replica de AK.

Encajan perfectamente en mi RK74 de G&G.
Tenía mis dudas sobre la compatibilidad con mi réplica, pero encajan muy bien y apenas tienen holgura lateral y ninguna frontal.
Le dan un toque más moderno a mi Ak 74 y evitan el efecto sonajero de los cargadores de alta capacidad ( Que son una gran opción si no te importa ese detalle).
Gracias a su diseño suave y apenas sin aristas he podido usar los pouches rígidos de M4 que ya tenía . Encajan perfectamente y no se mueven . Muy recomendable la compra de un cargador rápido y un adaptador para cargadores de Ak ya que nos facilitará la recarga de los mismos a la vez que reducirá el tiempo de dicha recarga.
Para el correcto funcionamiento de los cargadores hay que poner antes del primer uso un poco de aceite de silicona en el cargador. Se deja actuar unos minutos y pasado ese tiempo se colocan diez bolas en el mismo. A continuación se sacan y se vuelve a repetir la operación esta vez con veinte bolas . Se vuelven a retirar las bolas y se repite de nuevo la operación con un mayor número de bolas . Se repite esta operación de llenado con bolas cada vez en mayor número hasta que alcancemos el total de capacidad del cargador. Cuando esto ocurra, desechamos las bolas usadas para este proceso y ya podemos usar nuestro cargador de forma habitual.

Para mi gusto y necesidad de juego, tras una partida, me parece una muy buena réplica: sencilla y resistente, cumple su cometido como réplica de asalto.
Con 350 fps llega sin problemas a los 50 metros.
Una buena réplica a un buen precio, compatible con casi todos los accesorios para AK de otras marcas.

Definitivamente recomiendo comprarla junto a una batería tipo Li-Po.

These midcap magazines are a good choice for those that have an AK AEG of Cyma, DBoys, E&L, LCT, etc. Maybe with a little modification in the back side of the magazines for fitting in some brands. They fit perfectly on my DBoys AK74M and I tested them in my Cyma AK47 as well and they fit properly.

Really good for the price, they feed perfectly for their Cyma AKs, so no issues in feeding BBs even in high rate of fire replicas.
There is some some wobble when the magazine is properly seated, but that's to be expected as of all airsoft replica AKs.

The magazine fits properly and feeds BBs correctly. I did not notice any material defects or damage.
The material quality also seems good, but the first game will reveal how it performs in practice.

perfect for my cyma cm.053 its sturdy lightweight and holds a lot of bbs my only problem is that the curved and long shaoe makes it hard to put it in a standard tactical vest also its very drop proof as i jave accidentally dropped it on solid concrete and it only had some minor scratches on it, no internal problems or broken parts, it fits the cm.053 perfectly without wobble.

Great mags for the price, they feed reliably and can handle a punch, the only think you shouldnt do is fall straight on the mag with your ak because the lip that clicks in the rifle will break off.

You could go with the metal style ak74 mags to prevent

It fits perfectly into the arctarus ak12, S&T sport line ak74M and the CYMA 052.A (RPK74M). I have been using CYMA ak mags for years and have never had a problem with them. It has a durable design, dispenses BBs well, and is used in AK replicas from many different companies. I don't think a mags needs to know more than that.

It holds BBs and feeds them. The only and biggest issue is that the bottom cover literally falls off at the gentlest touch. The only solution so far to that seems to be to glue the cover on. None of my mags ever had such an issue.

Works flawlessly. Good value for money. Full metal housing provides a more realistic feel. It's worth paying the extra few euros compared to a plastic design.

Hibátlanul működik. Jó ár érték arány. Teljesen fém ház realisztikusabb tapintást biztosít. Megéri ráfizetni azt a plusz pár eurot, egy műanyag kivitelhez képest.

Works flawlessly. Good value for money. Although you can buy a metal case for a few euros more. It doesn't affect the operation, it just feels more like a weapon.

Hibátlanul működik. Jó ár érték arány. Bár pár euró pluszért fém házast lehet venni. működését nem befolyásolja csak tapintásra fegyverszerűbb.

Ordered 5x of these and they work perfectly with cm.045 aks74u. No feeding issues at all in AEG and HPA configuration. Good quality materials and sturdy construction. Hopefully the spring inside them last a long time.

Amazing quality and it shoots extremely well. Tuned my hop-up and it shoots like a dream. Included mags didn't fit amazingly but I ordered some extra which fit really snug. Full-Auto shoots surprisingly fast. The only real issues I've noticed is that there isn't a lot of room for the battery - it will work with a bit of puzzling though, and that the front sling point is quite small, but that could just be an issue with my specific sling (I use one not entirely meant for these sort of things).

this AK mag can use so much AK's like cm.048S and cm.052A and its work my AK-74M Airsoft Assault Rifle Sports Line ETU by S&T.Its so solid polymer its so durable.i think its look cool the modern russian seat's.

I am amazed with this AEG replica through it's authenticity to the quality build and everything. Great begginer replica comes with two hi-cap mags that are also very good quality and a cleaning rod. Also easily modifiable with lots of cyma brand parts and other brands.

CYMA is a brand very well-known for being the best bang for your buck when it comes to airsoft replicas, and the CM.045 is an excellent example of this.

Possibly my favourite Airsoft gun right now. It looks unique, plays great, and is sturdily built.

Pros:
-Hefty weight gives a realistic feel.
-Game-ready right out of the box (as usual for CYMA products.)
-Almost a 1:1 replica of the real thing.
-Compatibility with AK gear from other brands.

Cons:
-Low fire-rate (The high speed version is only ~20 bucks more, so no big deal.)
-NOT compatible with LCT magazines.

Tip: If you want to use a barrel attachment, you can remove the existing muzzle attachment and, under the adapter that it was fitted on, there's a 14mm CCW barrel. Removal is not difficult, you just have to remove a grub screw with a hex key and then twist clockwise.

Brilliant magazine from CYMA. Bought for use with my Specna Arms J series. It's quite lightweight (polymer body) but feels robust and sturdy in the hand. Feeds flawlessly and it actually fits in the mag well better than magazines that originally came with the replica! Bought 5 for an excellent price. Will buy more in the future if needed! Although I suspect these will last me a long while yet!

The product arrived in record time at its destination, a quality product, exactly as in the pictures and description! I recommend buying with confidence from this site... with each order I was surprised how quickly they arrived and always came exactly what I ordered!

Although they didn't fit in my E&L 702 custom, I believe it's not the mag's fault, but somehow my tech has put my hop up unit lower than usual because the problem was in a very specific spot that i cannot really explain

anyway, they work flawlessly after my modding to fit, as the should

The price is well justified. The magazines feel robust. I haven't had any problems with feeding so far. They attach nicely and don't wiggle around as much as some other magazines. The BB's inside don't shake around as much as well so that is a nice stealthy bonus.

Recommend!

one of the best mag for Ak74 style replicas !

Been using these for a couple of years NONE of them had misfeeds or incompatibility etc.

Used then on Cyma , Specna , E&L , Bolt replicas (some needed a bit of filling )

Chead , durable and lice looking ! there you have it

Does the job well enough. Feeds prefectly. There is a bit of side to side wobble as all other mags, but it is no problem for it to function correctly. Should have gotten more now that I think of it. Use it with a CYMA 0.40C

The Cyma AK74/AK-105 mid-cap magazines are a great choice for players who prefer reliable feeding and a realistic look. I purchased three of them, and with minimal home modifications, they fit perfectly into my Cyma 040C. Once adjusted, they perform consistently and are an excellent value for their price. Highly recommended for anyone using compatible AK replicas!

With this price point, I could say nothing bad. In most cases, it works pretty well. The magazine itself is lightweight and easy to carry. The overall quality is not as good as PTS magazine (much more expensive as well). When inserting CYMA AK, it has slight wobbling that could resolved by easily using electrical tape.

These mags are incredibly light weight, but not to the point where it feels like a toy. It does, however, make me question its durability a bit. Though for the price you pay for each mag, I honestly cant complain. I just wish it would sit a bit more snug like their drum mags do but over all, it works nicely. You might have to put a bit of electrical take under the back catch if you want to use it with an AirTac adapter like I am.

Very good and realistic. Solid materials. Very accurate shooting. I recommend it.

Patogus mažas svoris geras man patiko

Durable polymer magazines that work perfectly with my CYMA AKs. Best paired with my polymer body AK-74, but I also use them with the AK Alfa as well. Reliability is excellent and they're easy to maintain.

Very good replica and very accurate! The only problem is that the old metal mags of Cyma don’t fit in the new one, but it is fixable. The fps are as described in the infos of the replica. There is also a paper of the tested shots before you get it and the warranty paper. I recommend it for AK lovers!

Secound time i bought this replica over the course of like 2-3 years. Reason i owned two is because of diffrent setup. Its affordable, durrable, stable stats making it a good build from the getgo. U can build it internally or play stock. Id sugest building it since its more fun to have better parts in Cyma. The quality är s overall amazing! The metall Cyma Mags fit perfect without any wobble. Stock parts are good enough too. What i like about this rifle as follows

-Light weight compared to my E&L, making it a nice midrange-CQB carbone
-Its shortness making it flexible to shoot around courners
-It has good internals and externals as a stock rifle
-MANY oppotunities to upgrade it to be even more badass and yet again, it will still be lightweight!
-Can look sexu with a silencer or an aggresive flash hider.
-Its east to dissassemble.

My biggest advice would be to install eather a mosfet or an Aster mosfet on this rifle with time or at the start. It would do justice to this rifle.

Overall im very happy with Cyma. Can mever go wrong with their rifles. Worth every penny.

Got these for an ICS AK-74M. They work great with no wobble. They fit as good as the oem hicap. However they feel slighty less quality compared to some of the older mags I've used. Get them in bulk and stock up! Everytime I order at least $200 worth of stuff to justify the shipping cost, and its still cheaper than shops in the U.S.

CM.045 [CYMA]
It's a good product for this price category.
Material is fine and robust, I asked with 360 fps, with this I can shoot about 30 meter precisely with the gun.
The original high cap mag is not so good in material, and it's wobling very hardly, so the mag is not so good in quality side.
All over the quality is good for this price, and I like it as my main weapon. :-)

Amazing beginner AEG, love it!
Good quality, nice steel,very little wobble in the hand guard and stock.
All Cyma magazines fit very well. The rkp mag is a little tight, but it’s okay :)
Only problem is getting lower hand guard back on, it was a little tight, and you could possibly break the little lever which retains the hand guard. Just be careful.
10/10

Hello.
I bought three of these for my E&L AK-105.
Better than the oroginal mags for more more less money. Also fits perfectly for Cyma aks too. Feeds good. No wobble. Not fragile. Good texture not shiney.
Recommended for cyma and e&l replicas.
Thank you very much.

Fit very well on cyma cm.76 very stable and good looking magazines. I take 5 of them and all are just perfect. I will ordre more when thay have in stock. Thanks for the good quality, price and fast shipping.
You are the best.

Its a plastic mag but its very solid (i dropped it several times). I recommend it. Its a simple mid cap magazine, nothing more. It can feed cyma guns without any issue (i had none).
Best for tactical ak's ad for who likes bakelite magazines.

Great mid cap mags they work as intended and I havn't had any trouble with them so far.
Ive been test fireing my ak with the mags and thats worked wonderfully plus I used them last weekend at a game without any touble

Lot of feeding issues whit these magazines...

the magazines did not feed, and if they did, they gave two bb's at once. The weapon was a Cyman AK47. A drum magazine has been used in the gun without any problems, so the problem is definitely in the magazines.

Short summary: must-have for an entry level magazine.

The magazine itself looks very real and is pleasant to hold in your hand. To my surprise, it was noticeably bigger, than an M4 mag. There aren't any bad seams or badly produced parts to it, everything is in it's place. I have used it already in a few games, and it's really sturdy and houses a *lot* of bbs. No malfunctions or misfeeds, all three magazines worked perfectly. On semi-auto fields it is almost not needed to reload more, than once per ten minutes of active gameplay, as it has half the capacity of a regular hi-cap mag. Another thing to note is that due to the curved shape of an AK mag it is tricky to get in a STANAG magazine pouch, but still possible.

Pros:
+ Good looks
+ Decent production quality
+ Very affordable price
+ Weight that balances perfectly with the manufacturer's guns

Cons:

- Is a little wobbly in a Cyma 048 (is fixable if tape is applied to inside of the gun itself)

In summary, I'd recommend it to anyone who doesn't want to spend much and still get a good magazine.

The mid cap mags of Cyma fit well in my CM.040. They feed well and haven’t led me down. They are sturdy and come with some heft, which is a good thing if you’re trying to look for realism. And for the price, it’s a bargain. Thanks Taiwangun!

Sturdy and with a clean finish, if you're on a budget it's more than enough to satisfy your BB-slinging desires.
On a note, it did fit snug in my LCT aks74u, tighter than the magazine it came with.
Must definitely buy more.

Great mags that just works, nothing fancy but a good mag. Bought a set of 5 mag that worked great in a muddy skirm where the have been used to the max. If any broke I would instantly by one again for the price

Cyma aks are the Kalashnikov under the ak's.
Works perfect out of the box, read a lot about some loose mags etc, I guess Taiwan gun did made sure I didn't get a lemon! Love the smaller form factor but stil having a large range to counter mid to longe range targets. If you love ak's and CQB this is a no-brainer

Low price, low quality, work for my friend´s cyma but wont feed arcturus. If you want some cheap but still good looking magazines and you have a cyma o any compatible replica I would buy this mags, no need to buy 20€ mags if you dont need them to be metal

After filing the front lip fits in my Arcturus AT-AK04. It wobbles slightly, but less than the Fuxing 170rd mag and its not problematic. The only downside is that plastic is noticeably thinner than other mags, but its price is pretty low, so it makes sense.

Pienamente soddisfatto del prodotto. Perfetto il funzionamento con Cyma AK74U. Sembrano essere molto migliorati sia come qualità costruttiva sia come tensione della molla interna. Qualità/prezzo imbattibile.

Classic Cyma magazine. Works great in both Cyma and LCT Ak replicas. When using for the first time be careful not to overfill it and possibly damage the spring.
other than that it should last you for a long time

I am very satisfied with the replica, excellent work, 80-90 meters straight shot. Short and comfortable Kalashnikov model, real dimensions and weight. I was looking for this for a long time, I found it and thanks to the people from Cyma

No complaints. Works well with CYMA AKS74U CM.045 (I got the High-speed version, but that shouldn't make a difference), doesn't misfeed, very little wobble, and it's been dropped a few times but it's still kicking.

Great gun . Full metal build like a truck !!
Shoots amazing acurate. Great finish! The guys and girls of taiwangun shimmed this beast to perfection. Love the collour of the furniture such a nice tone of plum. One downside it came with a loose ish stock

Accurate and very responsive trigger out of the box. Definetly best value for the money. Does have some heft to it. Magazine however can be brittle. I recommend bying those steel one to complement the look on the rifle.

fits perfectly on my cyma and aps aks! for the ARCUTURUS AK05 you have to file down the upper part of the front lip, else the mag will get stuck (i broke 3 until i realised how to properly file them to fit perfectly) to prevent you from my experience, while filing, try to insert the mag, but dont push it in, until it slides in almost effortless :)

It's need a little filling on the front lip to be used for the replica ARCTURUS AK01, the magazine are very well made and solid.

Il faut limer un peu la lèvre avant pour qu'elle soit compatible avec la réplique ARCTURUS AK01, le magazine est vraiment bien fait et solide

Lovely airsoft! Very solid and sturdy. Absolutely amazing handling and firing. All parts of the gun feel solid. The handle and the grip are plastic but not the ones to break. Sight is amazing very accurate and powerful motor.

They feel decent and surprisingly rugged for the price.
Had no issues with misfeeding and fits my LCT TX-S74UN perfectly. I'm using the LCT magwell spacer, your mileage may vary without.
Will definitely be ordering more.

I purchased this for my dboys ak74su and it fits perfectly, only with a little wobble in side direction but that doesn’t bother the feeding. Absolutely recommend it!

Really good replica for starters. shoots great out of the box

Pros:

+ Weight feels nice
+ Very durable
+ Shoots far and straight

Cons:

- Stock magazine is very cheap feeling plastic and wobbly

Fits perfectly in my CYMA AK105.

Pros:
Steel body and stock makes this a tough replica. High Cyma quality, with lots of parts available to mix-and-match your own build. Mine shoots between 397-409 fps, so it could be a bit too hot for some fields.

Cons:
Stock is a little bit wobbly, but even on the real steel version it wobbles, so it’s authentic.

Summary:
It’s a great gun for beginners and long time players as well. Absolutely recommend it!

Works great, looks great. For the price it's a clear recommendation from me. It looks and feeds well in my LCT LCK-15 EBB.

As always with cyma their magazines are cheap, reliable and rigid.

The only thing I can complain about is the weight, I would like for it to have a bit more heft to it, but I suppose that's more of a personal opinion.

It is a very good replica, i recommend it everyone, who want a very all-round weapon, i can use it in CQB and mid-high range forest environment. I have only one problem with it, i need to be change the hop up rubber, because every shot pulled to the right side.

Fits my Lct EBB ak right out of the box, and feeds it just fine. Forget about lubricating the mags and other nonsense "break ins", just load 30-40 bb for the first time, repeat it with 50-60, after that you are set. For the price they are unbeatable.

Nice black magazine for cyma and jing gong aks. In the time might jam, but if you remove the plastic tip that push the bbs up, you can get more durability.
It looks better on aks 105, ak 74
This is the one “chambered” on 5,45 x 39

Jó árban van, de a minősége nem a legjobb és nem illeszkedik az Arcturus Centaur B-be. Reszelni kellett rajta, de így nagyon el van vékonyodva a hátsó akasztó.

-----------------------

Good price, but it's material is not the best and does not fit my Arcturus Centaur B. You have to modify the frontal and back hook, but the back hook with the modification became thin.

Well I always wanted an AK. This confession out of the way I think it's one of my best purchases ever! Great gun for the price.

Holding it feels well made and solidly built. Mostly steel, some parts other metal, but even those parts don't feel cheap. Stock is good, no wobble, clicks in place with a satisfying sound!

Shoots a little hot out of the box, changing the spring guide to a model with less pre-stress and the piston head to a polimer one did the trick (back to around 390fps).

Internally it's cyma blue, parts are pretty okay, especially in this price range. Sound of the shot is crisp, shimming was pretty good. Cylinder really nice with the blueing and air seal can be perfected with just a little lubing.

All in all, it's a good replica and not just for beginners!

Bought a couple of these mags, since i dislike highcaps.
You get the cool AK74/5.45mm magazine look, but they are not made of durable material.

They are cheap, you can really buy a good bulk of these and not care if they break or get lost in the heat of battle.
Easy to change if you have spare magazine shells or highcaps you want to change to midcaps, just hammer out 2 pins and pull the whole inner magazine out, be in mind the bottom plate comes of too when doing this.

Shells break with ease, i had one mag i tried to load but the front anchor broke off, i didn't even pry it in, just did a standard reload.

Terrible realistic metal parts, beautiful. The cyma brought the expected quality!

Full metal
Strong and heavy :)

The factory high cap magazine is of poor quality, but all magazines fit nicely