[Set] Réplica CM.011 HIGH-SPEED [CYMA] + 150rd mid-cap magazine for G36/SL8 Series [CYMA]

Magazine fits 4/5 okay to the JG Works G36 replica. Important to notice that the staples on the side does not match with original HiCap magazine, so you cannot vouple them together. Standard 100 rds BB loader fits good, easy to load and reload. 3/5 all together.

Works very well with the older first gen KWA KG36C, no feeding issues at all and feels good quality. Another upside that you can check how many BBs are still in the magazine and that for an affordable price!

I absolutely love it, so let me explain why it gets 3 stars.

If you are a beginner and/or are not comfortable with disassembly and upgrades, don’t buy it. My G36 shot 0.88 J stock with 19 RPS on an 11.1V, and the BBs curved hard to the right. The reasons for this are a terrible (and I mean really terrible) stock nozzle and hop-up chamber, which didn’t have a clean cut for the nub. As a result, part of the nub stayed up and became slightly deformed when hop was applied. The charging handle feels like it’s just waiting to break off, and mine also came without rails.

However…
If you are a little bit tech-savvy and not afraid to pull out a few pins and screws, then by all means, go for it.

The body feels really good—no squeaks. The outer barrel and flash hider are plastic, but you can easily change the flash hider, and the barrel is covered by the handguard anyway, so who cares.

After shimming, the sound is absolutely fantastic. The short-stroked CYMA 13:1 gears are great, and CYMA’s short high-torque motor is quite decent as well.
The nozzle is basic CYMA blue plastic without an O-ring. The piston and cylinder heads are silent-type, both with double O-rings, and they seal perfectly. The cylinder is 3/4 ported and ribbed on the outside (obviously). The piston is a classic CYMA with metal teeth. It comes with an Omega-style nub, which is another plus. The inner barrel is brass, 265 mm in length.

After slightly grinding the nub window and adding an SHS nozzle and an M125 spring, it now gives a consistent 1.2 J.

Overall, a great replica for the price.

Rating is based on its price. I paid 102€ on sale.

External is solid but typical ABS plastic, some creeks in the handguard, my Golden Eagle G36K have slightly nicer externals but not the same kind of internals.

Internally Cyma High Speed replicas have, imo, best price to performance ratio out of the box. Zippy motor and gears.
Came with Dean/T-plug connector and trigger response is very good.

Excellent workhorse replica. I own 3 Cyma HS now.

Good product for the price, works properly. Color is a little more see through than i anticipated. Feeding is a little stiff when loading more that 100 bb's. But i imagine that might be resolved when i've used it for some time. The lock in my g36 feels really sturdy aswell. Did not have any feeding issues so far when using this magazine. Only real downside is the locks that can be used to fit multiple magazines into each other for quick reloading is a little too tight. This makes it a little annoying to attach and reattach them.

Love it. For the prize it's amazing. Delivered with a midcap that fits like a glove. NO wooble what so ever. Stock is very stable and the fire selector have a distinctive klick when you go from safe to pew and pewpew

I would recommend buying any high speed cyma guns over their other models. It is completely worth it and much more satisfying.you will have a faster trigger response due to the high speed gears. The quality of the gun is to be expected. The polymer is durable and looks great.

Good overall quality. Some minor problems with fitting the mag to a JG made G36. At first it was very hard to insert the mag in the well, the mold they use to produce the outer cover 2 parts is probably overused or faulty, the 2 halves don't align perfectly, there is a 0,3-0,5 mm step on the front portion that fits in the well. A larger file and a few minutes of work fixed the problem once the surface was leveled the mag clicked in without problems. This can be a problem specific to the type of rifle described above, others may have larger tolerances at the mag well. Price is reasonable. Does not rattle like the highcap magazines. Changing magazine comes more often but you can live with that. Shipping was fast and reliable.

The material is made of quality plastic it is very strong.
It feeds without any problem and I can see how much bb I a have in it.
I really recommend if you dont want to upgrade from hi-cap magazines.

Got these for JG G36C. They work good. My only wish is that they would make a nice click noise like the oem hicap does. Otherwise no complaints. Its wonderful to order many and get a bulk discount. Thank you TaiwanGun!

The CYMA High Speed G36C is a fantastic G36C for the money! I'm getting around 20 RPS on a 7.4v with around 315-320 FPS on a .20 bb which is perfect for CQB. The shimming in this gun is also pretty good from the factory and I believe it comes with a 6.03mm barrel pre-installed since accuracy is really good out of the box. It also weighs about 5 pounds but feels way lighter than that due to how balanced it is. I do have a few minor gripes with it however. First, the body does have a bit of creakiness to it due to its ABS construction, but it isn't an overly glossy ABS and seems decently solid. The magazine included also tends to spit out bbs around the halfway full point so you'll need to pay attention to the feed lip to make sure it and the bb are aligned correctly to not have this happen. Finally, the stock hop up rubber isn't that great since it can't reliably feed a .28 bb. All I did was swap that out for a Maple Leaf Macaron 70 degree bucking and now it feeds perfectly. It'll even feed some ancient Classic Army hi-caps I have! Overall, the CYMA G36C is perhaps the best G36 you can get for this price range. You literally just need to swap the hop up rubber to a Maple Leaf and it'll run like a champ. I'd also get different flavors of magazine to go with it, just in case the stock magazine gets annoying. Otherwise, buy this if you want a G36C, it's worth it!

Perfect fot on my G36. No misfeeds or BBs stuck mid cycle. Very happy. The spring is very firm and need some pushing to load properly with the speedloader. Very recomended and the price is awesome. Thanks!!!

I reviewed these a while back singing their praises. With a little more time with them I've noticed one very,VERY annoying flaw

If you bump literally anything, no matter how slightly, it will eject every single BB. I've loaded it into a gun slightly too fast and it began spewing bbs into the magwell making it so the mag wouldn't seat and I had to clear the bbs. Turning a corner and the edge of your chest rig tapped it? All your bbs gone.

Packaged with the right way, what i ordered and what i wanted and saw on the site. i would recomended it. recieved the package on time. the suport always there. i wish that for group buyw i could get a discount.

Genuinely surprised as to how well these feed. I own 6 and theyve all fed perfectly at 26-30ish RPS (depending on which g36 theyre in).

Theyre made out of a pretty decent polymer that I'd say is sturdier than the majority of polymer/plastic AR magazines.

The CM.011 might be the best price to performance ratio gun out there. Stock with a chrap Pico SSR3 has it running around 26 rps on an 11.1 LiPo. The stock hopup assembly has no issues bucking my .28's but I still recommend getting a better bucking and barrel. Honestly if I had a complaint it's just that the gun uses the same ABS receiver CYMA used on G36s 10 years ago, but this doesnt really bother me.

Honestly it's a great option for anyone.

These work well and fit on my CYMA CM.011 G36c. They are made of durable plastic and feed with no problems. I went full auto and everything was still running great. Another thing, It is important to lube the magazines with silicone oil. This is important because it helps the magazine runs smoothly with no problems.

Those magazines are amazing!
I use g36c tokyo marui and they work amazing, i really recomend them to all users cuz it is really hard to get 150 round magazine for g36c in europe and here you can buy them high quality for less money!!

a little bit hard to plug in and out on a umarex replica.hard to stack,
apart from that they work great, translucent plastic so you can see how many bbs you have left

This replica performs wery well out of the box mechabox sounds goood Its quite accurate
It shoots around 330-350fps with 0.2g bb
With 11.1 lipo It becomes unstoppable full auto machine

Good quality mid-cap magazine. All plastic body but is still durable. Make sure to oil the magazine before use to reach maximum performance. The only complaint I have is that it was a bit difficult to attach to my other G36 magazine. Otherwise it is good for the price.

Played quite some time with this item. I can say its very good for its price but with not without some flaws.. If you can open gearbox yourself its a great buy overal. Had to repair it here and there but in parts i changed only bushings, nozzle, piston head and hopup rubber. Now can reach someone from like 50-60 meters with decent hit rate.

Very good fire rate, snappy semi and pretty good range too (after modding a little bit)

Very poor quality of assembly. Cramped wires, lack of grease, stripped threads on plate that holds safety lever. And the biggest bummer was spun bushings on bevel gear after 1 game - like 3-4k rounds.