+48 123626134 [email protected]
Cambiar idioma a inglés Cambiar el idioma al polaco Cambiar idioma a francés Cambiar idioma a español Cambiar el idioma al alemán
RINCÓN DE PRENSA
iniciar sesión | Registro
0 0

[Set] CM.097B AEG Replica Eshooter ETU - Black [CYMA] + Cámara trazadora Hop-up para M4 [CYMA]

El kit incluye los siguientes productos.:

Falta temporal
Artículo no disponible
¿ Cuando el producto esté disponible ?

  • Formas de entrega

    Ingrese el país y el código postal para ver los costes de envío

  • Datos técnicos

    Para ver los datos técnicos del producto incluido en el conjunto, haga clic en el nombre

    EAN 5904420018292
    Peso 2770 g
    Modelo de réplica Réplica de Airsoft AR15 / M4 / M16
    Color negro
    Material aluminium, polymer
    Tipo de cargador mid-cap
    Modo de fuego auto, semi
    Batería incluida NO
    Tipo de conector T-connerctor
    Versión de gearbox v.2
    Tipo de rodamiento rodamiento de bolas de acero
    Diámetro de rodamientos 8 mm
    Período de garantía 12 meses
    Hop up ajustable
    Tipo de rosca en el cañón anti-horario
    Munición .23g, .25g
    Longitud 730 mm
    Capacidad del cargador 160 BBs
    Longitud del cañón interno 295 mm
    Energía de salida 1.34 J
    Velocidad de salida 380 FPS con bolas de 0.20g
    Diámetro de rosca en el cańon mm 14
    Diámetro interno del cañón mm 6.03
    Quantity in package pcs 1
    ETU MOSFET TAK
    EAN 5904420005094
    Peso 80 g
    Color gris
    Material aluminium
    Quantity in package pcs 1

  • Opiniones

    • - 07.01.2026 escribió:

      It's a great product. I enjoy using it. I installed it on my devices. I've been using it for a long time now. I recommend it to other users. Overall, Taiwangun is my go-to store for everything I need for my hobby.
      Valoración de opinión: 0
    • - 08.09.2025 escribió:
      Picked this tracer hop-up up for my Cyma M4. Installation was quick — just open the gun, fit it in, and reassemble. Works great and lights up both green and red BBs really well. I wired it to the motor and it triggers only when shooting, which feels natural. Solid little unit, especially for the price.
      Valoración de opinión: 0
    • - 30.08.2025 escribió:
      Bought for my Delta Armory AR15 Bravo.
      I've conneted it to the motor, works well.
      No extra engineering needed,
      only take apart the gun and then assemble it.

      Huge pro it illuminates the green and the red BB's too.
      Valoración de opinión: 0
    • - 08.05.2025 escribió:
      Replica is phenomenal! It is fairly light weight but does not feel inexpensive at all. I am returning to the hobby after a ~15 year hiatus since my son is now old enough to play. There was nothing that had this type of performance for the price when I used to play. I still have my old Tokyo Marui and, while smooth shooting, it feels cheap and flimsy next to this replica. I have watched several teardown videos online and they all report good quality internals. It can hop .32 BBs with the stock hop unit and bucking and even with the 300mm barrel has no problems hitting accurately at range. I love the 3 round burst feature that is programmable in the ETU, and it feeds from all of the limited selection of magazines that I have tried with no problems.
      Valoración de opinión: 0
    • - 13.02.2025 escribió:
      Good hop-up set up and cheap, do the job.
      Keep in mind to do a proper bucking and nub upgrade before.
      I used maple leaf omega nub, and a super macaron(color depends of your fps) and it worked perfectly.
      I love that on only need to use one battery
      No instruction on how to do assembly or wiring...

      You can connect the hop-up cable to a lipo battery balance charge connector running the cable through the receiver (very tight but doable) nut it is always on (or off with the small toggle switch)

      You can connect it to the motor in parallel (more complexe, didn't try yet) and it will light only when you shoot
      Valoración de opinión: 1
    • - 30.12.2024 escribió:
      So far i am really impressed with this replica by Cyma and taiwangun. No where else can you find this replica for this price with and up graded mosfet.

      The fact the taiwangun checks the rifles before they go out is really a nice touch. The chrono reading they got are spot on to what I go as well. Really great product for a great price and extremely fast shipping to the US
      Valoración de opinión: 0
    • - 30.12.2024 escribió:
      So farvi am really impressed with this replica by Cyma and taiwangun. No where else can you find this replica for this price with and up graded mosfet.

      The fact the taiwangun checks the rifles before they go out is really a nice touch. The chrono reading they got are spot on to what I go as well. Really great product for a great price and extremely fast shipping to the US
      Valoración de opinión: 0
    • - 07.12.2024 escribió:
      Very good gun, nice response and fire rate even on 7.4 batteries. Only thing i dont like is the pistol grip but overall the gun is solid build, very nice response. just cyma plat with eshooter etu. You cant go wrong with this
      Valoración de opinión: -1
    Añadir una opinión


Directrices de seguridad y uso

Lea la siguiente información para un uso seguro del producto:
SKU: · EAN: - · [Set] CM.097B AEG Replica Eshooter ETU - Black [CYMA] + Cámara trazadora Hop-up para M4 [CYMA] ·
Notificación de problema de seguridad · Persona responsable y fabricante
Persona responsable y fabricante
Persona responsable de la introducción del producto en el mercado de la UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polonia · [email protected]
Fabricante:

LAS REPLICAS DISPONIBLES EN TAIWANGUN.COM PUEDEN SER COMPRADAS SOLAMENTE POR GENTE MAYOR DE EDAD. PRODUCTOS DESTINADOS A ASG Y JUEGOS TÁCTICOS SOLAMENTE

¿Preguntas? Estamos encantados de ayudarle. Envíenos un correo electrónico a través de [email protected]
* Los precios incluyen el IVA, sin incluir los costos de transporte.