+48 123626134 [email protected]
Disponible
Nuestro precio*: $247.95

Elige tu potencia FPS:

Estándar

400

Media

350

+$1.00
Low

330

+$1.00
  • Formas de entrega

    Ingrese el país y el código postal para ver los costes de envío

  • Datos técnicos

    Para ver los datos técnicos del producto incluido en el conjunto, haga clic en el nombre

    EAN 5904420010784
    Peso 2960 g
    Modelo de réplica Réplica de Airsoft 416
    Color negro
    Material aluminium, polymer, acero
    Tipo de cargador hi-cap
    Modo de fuego auto, semi
    Material del cargador acero
    Batería incluida NO
    Tipo de conector small Tamiya
    Versión de gearbox v.2
    Tipo de rodamiento rodamiento de bolas de acero
    Diámetro de rodamientos 8 mm
    Período de garantía 12 meses
    Camuflaje tan
    Grupa kolor 3558
    Munición .23g, .25g
    Número de serie SI
    Longitud 700 mm
    Capacidad del cargador 300 BBs
    Longitud del cañón interno 290 mm
    Energía de salida 1.52 J
    Velocidad de salida 400 FPS con bolas de 0.20g
    Diámetro interno del cañón mm 6,03
    EAN 5904420004448
    Peso 220 g
    Color negro
    Tipo de cargador mid-cap
    Material del cargador acero
    Capacidad del cargador 160 BBs
    Compatible con AR15 / M4 / M16
  • Opiniones

    • - 20.05.2024 escribió:
      Tiene un aspecto espectacular y parece robusta. El guardamanos tiene un poco de juego, no le valen todos los cargadores de M4, el cargador que mejor le va, son los que tienen una hendidura rectangular, con una pequeña pestaña saliente, para el mecanismo de bloqueo de cargador. Los cargadores con las hendiduras cuadradas, hacen que el cargador se salga. El guardamanos tiene algo de juego, todo lo demás parece robusto. A mi me gusta mucho. Ahora a esperar que tal evoluciona de partida en partida.
      Valoración de opinión: 0
    • - 27.02.2024 escribió:
      Muy buenos acabados, e internos con luy buena pinta, nozle de aluminio y cabeza de piston de aluminio con doble torica y rodamientos, guia de muelle con rodamientos y piston con toda la cremallera con dientes de acero, el lower y el uper encajan a la perfección si que es cierto que merece la pena hacer una pequeña modificacion al guardamanos por si acaso se afloja aunq es dificil viene muy ajustada, cañon de precicion goma mapleleaf y a correr. Una replica fantastica. Aluminio cnc, por este precio es muy pero muy dificil encontrar algo mejor.
      Valoración de opinión: 0
    • - 29.05.2024 escribió:
      ENG DOWN BELOW

      Első taiwangunról rendelt replikám és be kell valljam nem csalódtam egy cseppet sem! Egyszerű dobozban érkezett a papírjaival, de persze a lényeg a replika. Anyaghasználatban nagyon jó, a 3kg kicsit érezhető, hogy kevés műanyag része van.

      Pro
      -Felszerelhető sok minden az elejére a RIS rendszernek köszönhetően
      -Jó motor
      -Bírja a 11.1-es LiPo-t is
      -Anyaghasználat, masszív szerkezet

      Con
      -Kissé nehéz, de meg lehet szokni (1 pontos pánttal használom, meg se kottyan ha lóg)
      -A tus előtti részen nincs akasztója, azt külön kellett venni hozzá. Egy 20 cm-es csavarhúzóval a tusban ki lehet szedni az odafogó csavart és cserélni könnyen ezt a kis alkatrészt karabineres övet csatolni lehessen rá.

      This is my first replica bought from taiwangun and I must say I'm really impressed! It came with its simple box (nothing special about it) with its papers. Material is very good, minimum plastic usage. But you can feel the 3kgs.

      Pro
      -RIS system at the front
      -Good motor
      -11.1 LiPo battery can be used
      -Massive replica

      Con
      -Little bit heavy but you can get used to it (I'm using a one point sling and you cannot feel it in the day)
      -At the end there is nothing you can attach your carbine sling, so you need to replace it with one. I recommend using a 20cm long screwdriver to get rid off the end so you can replace that small part for your carbine sling.
      Valoración de opinión: 5
    • - 26.03.2024 escribió:
      This magazin metalic qualitate is very good.Grip is so gud in my hand. It has a good weight, but not compatible with my Double Eagle M904A replica. Constantly slips out of it. But my friend to Cyma replica perfect fits.
      Valoración de opinión: 2
    • - 01.02.2024 escribió:
      well you say 160 but actually its only 95
      ive tryed to put 100 in and actually broke the mag so the bbs just got stuck, i opened it to see whats goin on and well , you lied, thats whats going on :/
      with the mag open ive put all the bbs i could fit in and counted them, 95 is the exact number off bbs you can possibly fit in one of these and that is 65 bbs less than promissed, i feel disapointed because i bougth 3 of these.
      Valoración de opinión: -2
      Odpowiedź sklepu:
      A few drops of silicone oil and following the instructions included in the product description will allow you to obtain the full capacity of the magazine. In this case it is 160bb, in case of problems, please contact our service. We'll be happy to help.
    • - 10.01.2024 escribió:
      The hole where the bb’s come out of is too small so wont fit fully in the gun(cyma cm.612)Was able to send them back for free bit would have to order a different mag and pay double on shipping, because i dont get a refund for the shipping or discount for the replacement order even though this mag is recommended on the product page. Stay away from this one and order a different magazine!
      Valoración de opinión: 0
      Odpowiedź sklepu:
      We're sorry for the trouble you faced with the magazine size. We'll work on a solution. We understand your concerns about shipping costs and will do our best to assist you. Thank you for bringing this to our attention
    • - 22.12.2023 escribió:
      Silent-play magazines offer a seamless gaming experience with ample capacity. Their durability ensures prolonged use, making them an ideal choice for enthusiasts seeking a reliable and high-performance accessory
      Valoración de opinión: 0
    • - 30.10.2023 escribió:
      I bought 3 pieces from this magazine for a DE-M923G. It fits perfectly into place. It is solid, strong and has a good weight, so it is more realistic. It dispenses the balls well, so far I have not been disappointed with it. 100% how I will buy again. More expensive than cyma magazines, but worth the price.
      Valoración de opinión: 0
    • - 28.07.2023 escribió:
      i buy this to my cyma CM.621 and it perfectly fit. this magazine works perfecly, the feed is good and fast.
      I have no problem with the material quality. is durable, i droped sometimes and still works.
      I recommend it, but only strictly for Cyma replicas because I heard that it doesn't work so well with other replicas.
      Valoración de opinión: 0
    • - 03.02.2023 escribió:
      Avoid this product unless you have the option to test it on site physically on your replica! I tried it on a Double Eagle M908A and it didn't fit at all. The metal shell of the magazine is not pressed very well and this makes it a bit thicker than standard this makes the magazine to stuck in the magazine well. It's so thight that you have to put a lot force to move it very little. I also tried it on a friend's replica G&G Predator CM16 and the result was the same.
      Valoración de opinión: 1
    Añadir una opinión
  • Preguntar por el producto

    El administrador de sus datos personales es \ KRAKMAN P.Kiepura , K.Michalik Sp. k. con su domicilio social en Cracovia, calle. Półłanki 18, 30-740 Cracovia, NIP/NIF : 6793082897, REGON: 122593008. Los datos personales se procesarán únicamente con el fin de contactarlo y con fines legalmente justificados del administrador de datos. Proporcionar sus datos personales es voluntario pero también necesario para contactarlo. Puede encontrar información detallada sobre el procesamiento de sus datos personales en nuestroPolítica de privacidad sobre los principios del procesamiento de datos personales. Campos marcados con (*) son obligatorios


Directrices de seguridad y uso

Lea la siguiente información para un uso seguro del producto:
SKU: · EAN: - · [Set] BY-817 Short barrel - Tan [Double Bell] + 160rd M4/AR15 Mid-Cap magazine [Fuxing] ·
Notificación de problema de seguridad · Persona responsable y fabricante
Persona responsable y fabricante
Persona responsable de la introducción del producto en el mercado de la UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polonia · [email protected]
Fabricante:

LAS REPLICAS DISPONIBLES EN TAIWANGUN.COM PUEDEN SER COMPRADAS SOLAMENTE POR GENTE MAYOR DE EDAD. PRODUCTOS DESTINADOS A ASG Y JUEGOS TÁCTICOS SOLAMENTE

¿Preguntas? Estamos encantados de ayudarle. Envíenos un correo electrónico a través de [email protected]
* Los precios incluyen el IVA, sin incluir los costos de transporte.