[Set] AT-NY06 Sword SBR LITE Mosfet mejorado [Arcturus] + CARGADOR VARIABLE 30/130BB M4/M16 - NEGRO [Arcturus]

Lo he comprado para el fusil cm 002 full metal y va como si fuera hecho para el. Es muy bonito y no me ha dado ningún problema. Muy agradable al tacto, con diseño futurista. Fácil de recargar con un tico tico. Buena compra.

Opinión airsoft:

Todo perfecto.
Producto de gran calidad.
Es un producto con buen balance calidad precio, da muy buenos resultados por el precio al que se vende.
Muy buena compra, compraré más unidades.
El producto es más barato que en muchas otras tiendas, sobre todo de España, por lo que es muy recomendable su compra aquí.

Cargador Mid Cap a Real Cap. Un lujazo si tienes que jugar partidas más realistas, poniendo la reducción de bolas a 30 BB's, cargador polivalente y alimenta muy bien. Totalmente recomendable, ya tengo 6 de ellos.

Me compré este cargador para las partidas más roleadas, puesto que tiene la opción de poner 30 BB's. Es una gran opción para tener un mid cap y real cap solo en uno. Compre solo uno para ver su funcionamiento y ya estoy poniendo en el carrito 4 más.

From an exterior standpoint the replica is very sturdy, the front part and the buffer tube is made from metal and the main body is polymer, even though is plastic is very sturdy. The trigger feels nice thanks to the microswitch but is has the trigger travel a bit more than i would like, when you put it in semi the trigger gets blocked mechanically and when you put in in semi you have a bit of tracer before you get to tge switch, it doesn't have the travel adjustment that you have with the FE version that has an etu but with a rubber band can make it feel like a hair trigger almost.

The buffer tube is standard, its good a thing that doesn't say on the website is how to take it out, when you press the latch a tiny pin comes down, with something pointy you need to grab it and pull it down so you can take it of completely, from there is a screw cap to unscrew and then you get to the battery contact, the battery space is a little small in the buffer tube (25c 1100mh battery fits snugly) if you have a slimmer battery it can fit in the stock if not only in the buffer tube, be careful how you chose the battery.

Performance wise is very good the rof is 16 bb/s a little small for my liking but paired with the torque motor in semi auto is very snappy. At my fild is semi auto most of the times so i don't find it a problem.

The mosfet is a very basic one no other functions is there just to make you contacts last longer. You camd upgrade it with and etu because of the gearbox shell is custom to fit the micro switch if toy need a new etu/mosfet only a inline one (like perun ab++) that fits in the buffer tube.

Internals are amazing great compression and sturdy materials so it can be upgraded power wise no problem.

It happened only once but still happened, in semi it double shot, on normal gameplay it didn't do it only in spawn where I tested a a bit.

An other thing is that my bbs curve a little to the left it might be a problem with my replica maybe an over screwed barrel or hop up, i need to test it more to find out, but besides this problems i love it.
I would recoamd a lipo alarm just so you don't damage the battery
The magazine is very good feeds with no problem, its a little lose for my liking but it won't fall out or something.
For beginners i recommend to prepare you mid caps when they are brand new, i mean to put 30bbs and then take it out then 60 then 90 and so on so the spring is prepared only need to make it once, my process took very little time because the spring was very smooth.

Hop up is very precise and has a working blot catch for easy adjustment.

When switching form safe to semi is not that smooth because of the mecanic blocking of the trigger but between semi and full auto is snaps in place.

Mine shot 370 out of the box not 360 how it said on the site and gets 1.2 - 1.3 joules with 0.25g bls bbs.

Besides the problems I mentioned the replica is very good the fact that bbs curve a little to the left is must be just mine because i didn't see people say anything about this i might try to repare it a little, if toy buy this replica i don't think that you will have this problem.

Exterior:

I bought an Arcturus AT-NY06 Sword SBR LITE Mosfet Enchanced gun recently and I would like to give my opinion about it. The body of the gun itself is plastic which is very durable and it’s not noisy like the cheaper plastic guns. It also has a few metal components which fit very good to the plastic. Every button, lever and every other piece works perfectly (I have a Specna Arms M4 on which one of the buttons don’t work as it should. I was afraid that it will be the same with this gun, but luckily it’s works.) The battery placement in the weapon's stock is a bit tight like on other weapons with this placement! A bigger sized battery can’t fit in there for example. I’d recommend longer and narrower batteries for the gun so that it fits perfectly into the stock. You can easily open the stock with a smart mechanism that beats every other brand.

Game experiences:

Now onto its performance in games. The size of the gun is perfect for both styles of games. For CQB it’s not too big, you can easily maneuver in narrow corridors. It’s also great for MILSIM games because it’s not that short that it would influence the bb's route towards the target. I chronoed it with 0.20 bbs and the results were more than satisfying. The fps was around 350-365 with the 0.20 bbs. I also chronoed it with 0.28 bbs with which I easily shot the torso area from around 45-50 meters. Of course if someone is not satisfied with the power of the weapon they can easily change the spring thanks to the quick change spring mechanism, although I think the default is spring is perfect. There’s a very fast gearbox in the weapon which I was skeptical about when I read the description of the gun. I wasn’t sure that it would really make a big difference, but after trying it everyone in my friend group was surprised by how fast it is! The trigger feels very good, it’s very snappy. I use a 11.1 volt battery and it works perfectly with the gun, it doesn’t overheat thanks to mosfet.

Negatives:

I can’t really find negative things about the gun. If I have to be nitpicky I’d only have about two minor things. First of all the gearbox is quite loud, louder than my Cyma M14 and Specna Arms M4 which isn’t a problem at all, I just noticed it. The other thing is the magazine, it’s pretty loose when inserted into the gun. There were multiple instances where it would fall out of the gun after a bit of running, so you have to insert the magazine pretty firmly so that it doesn’t fall out.

Overall I think this gun is a very good choice, I think everyone would be satisfied with its performance. The price is very reasonable and good for how durable and how well it’s put together. I wish everyone good games

Exterior:

I bought an Arcturus AT-NY06 Sword SBR LITE Mosfet Enchanced gun recently and I would like to give my opinion about it. The body of the gun itself is plastic which is very durable and it’s not noisy like the cheaper plastic guns. It also has a few metal components which fit very good to the plastic. Every button, lever and every other piece works perfectly (I have a Specna Arms M4 on which one of the buttons don’t work as it should. I was afraid that it will be the same with this gun, but luckily it’s works.) The battery placement in the weapon's stock is a bit tight like on other weapons with this placement! A bigger sized battery can’t fit in there for example. I’d recommend longer and narrower batteries for the gun so that it fits perfectly into the stock. You can easily open the stock with a smart mechanism that beats every other brand.

Game experiences:

Now onto its performance in games. The size of the gun is perfect for both styles of games. For CQB it’s not too big, you can easily maneuver in narrow corridors. It’s also great for MILSIM games because it’s not that short that it would influence the bb's route towards the target. I chronoed it with 0.20 bbs and the results were more than satisfying. The fps was around 350-365 with the 0.20 bbs. I also chronoed it with 0.28 bbs with which I easily shot the torso area from around 45-50 meters. Of course if someone is not satisfied with the power of the weapon they can easily change the spring thanks to the quick change spring mechanism, although I think the default is spring is perfect. There’s a very fast gearbox in the weapon which I was skeptical about when I read the description of the gun. I wasn’t sure that it would really make a big difference, but after trying it everyone in my friend group was surprised by how fast it is! The trigger feels very good, it’s very snappy. I use a 11.1 volt battery and it works perfectly with the gun, it doesn’t overheat thanks to mosfet.

Negatives:

I can’t really find negative things about the gun. If I have to be nitpicky I’d only have about two minor things. First of all the gearbox is quite loud, louder than my Cyma M14 and Specna Arms M4 which isn’t a problem at all, I just noticed it. The other thing is the magazine, it’s pretty loose when inserted into the gun. There were multiple instances where it would fall out of the gun after a bit of running, so you have to insert the magazine pretty firmly so that it doesn’t fall out.

Overall I think this gun is a very good choice, I think everyone would be satisfied with its performance. The price is very reasonable and good for how durable and how well it’s put together. I wish everyone good games

Super chargeurs pour base M4 Arcturus, feed nickel, bonne fabrication et finitions. C’est du solide. Le passage de 130bb a 30bb se fait très facilement et plus trop de perte de billes avec le bitonio qui sort du chargeur

I love these magazines, I bought 5 and used them all during games, never had any feeding issues with my arcturus ny06. A tip for changing the magazine from 130 to 30, is that you need to take the pin out close to the feeding side of the magazine. It took me such a long time to figure that out, but it is a super great mag!

The magazine works flawlessly. Easy to load and reliably feeds rounds. The construction feels solid and durable. This product has significantly improved my shooting experience. Very satisfied with the quality.

a bit bigger than i initially thought but they fit perfectly on my jg g36 with the m4 magwell from battleaxe, they look sturdy and were a great solution for my pouch problem with the g36 mags. Color matches the gun perfectly and i havent had any feeding issues so far

Have 4 of these mags, no feeding issues, clears the whole mag thanks to protruding follower. The follower is red, easily confirming an empty mag.

Slightly loose in my M4, nothing some tape on the side couldn't fix.

Really nice quality just took a moment to understand that you need to remove the metal pin at the top to slide out the plastic inner part from the casing to change the bb count, but nice plastic not too slippery and is quite durable, the spring also seems to be good for now will keep using and see what happens, as long as you don`t keep the spring under tension all the time should last a while...

Jó tár! Arcturus fegyverekkel jól működik, a gyártóból eredően.. :) Elég könnyű, de masszív műanyagból van.
Adagolási problémába nem futottam bele, de van egy kis kotyogása a replikában..
Teszi a dolgát, tárol-adagol. A realcap funkció milsim játékokhoz hasznos!

Hi there, i buy 4 if this beautys cuz i have one to my gun already

They are solid some good quality plastic
I didnt know that they are fixed with a metalpin and i was close to break one

Negativ is the feeding with a odin speedloader
Cuz you lose 3-5 bbs

In general for this price its amaizing
Would buy same again and thanks to taiwangun my Favorit store

I love this magazine; it's fantastic. The build quality feels amazing, and despite accidentally dropping it multiple times, it remains unscathed. The feeding performance is flawless; I've never encountered any issues with it. Being able to easily remove the actual magazine from the shell is incredibly convenient, simplifying the cleaning process without needing a screwdriver. While I haven't personally utilized the variable system, the concept of swiftly switching between 130bb and 30bb capacity seems nice.

This thing is so accurate! Absolutely love it! Build quality is descent, trigger response time is very good, mag is good, overall very happy with it. Haven't done full range test yet, but with 0.25 I can hit A4 at 40m. Somewhere in the rail is bit of wobble and mag wobbles too. 1100mAh 11.1 LiPo fits perfectly inside. Overall, it's easily 5 out of 5. Recommend it to everyone.

Awesome magazine!!!
Follower spring is strong and it can feed aegs with insane fire rate no problem.
Extender follower does help a lot.
Good external quality and the bb window is useful.
Nice texturing and lightweight, will not slip through your hands in hot weather.
Only downside I found is that some magcatches may be little picky with this magazine.

Sometimes it needs a lot of force to properly click in place. That is the case for both mags I ordered, while other Arcturus mags work perfectly. Other than that, it does what it's supposed to do. The variable-cap tab is a little difficult, but I don't really use it

I absolutely love this mag, it great. The build quality feels amazing. I've dropped mine several times with not so much as a scratch. It feeds amazing. Never had any feeding issues whatsoever.
It's very convenient to quickly be able to pull the actual mag out of the shell. It allows for easy cleaning without having to use a screwdriver.
I haven't used the variable system, but it seems very cool to quickly on a whim be able to change from 130bb cap, to only 30bbs.
Overall, another common Arcturus.

The fact that these can be switched from low to mid cap was a surprise to me. I've been searching for some magazines to fit my UAR501 without worrying for the fit issue. Definitely the best price for these on the market. Will come again if I need a replacement.

Amazing mags for my arcturus m4 replicas. Lightweight, durable, quality also on point. No feeding issues. Also works great with double eagle replicas.I absolutely love that mags have transparent window and you can see when you almost out of BB's. I highly recommend this mags.

- Build quality as expected, lightweight.
- Windows for bbs is meh, you need to look directly into it, you can not see anything from pointing your replica, you have to basically lean forward or you have to align your weapon so you look direclty into the bbs window
- The window is also very dark..
- Spring VERY VERY strong from the beginning
- Did not fit well into my hopup at the beginning, had to change
- The plastic bit at the photo on the right(back side of the mag) is very good for open pouches with no retention, prevents the mag from jumping(more tension)
- It is not very good for high speed low profile with a lot of tension elastic mag pouches, or you have to remove the plastic bit at the back
- Price OK
- Red follower OK, pushes extra 2-3bbs into the chamber.. (kinda disappointed)
- 130bbs capacity is OK, but 150 would be better for me

Conclusion, not very user friendly since I had to do modifications to the 6 mags..

Very good use of materials, durable magazine, ergonomic design. It dispenses accurately and continuously, but before use it is recommended to move the spring gradually through partial refills. The product is excellent value for money and I warmly recommend it to all M4/AR15 users.

I ordered this mag not long ago, I had a game with it. I use it with a cyma cm.515. It feeds well.
I like that you can easily pull out the internals of the mag, because if you cant buy the tan coloured, you can easily paint it whitout painting any neccessary parts of the mag. The switching between 130 round and 30 rounds is so simple and easy.

I haven't had any problems with it so far, I ordered it together with "AT-ST01 LWT CQB SPORT - BLACK [ARCTURUS]"
There is no downside. The gun wobbles a bit, but it doesn't bother me. nice color and shape

Pros:
- There is a nice window on the side of the magazine so you can see how many BBs you have left.
- Very light
- Feeds all BBs in the magazine.

Cons:
- A bit expensive
- A bit wobbly in my Arcturus AR15 LITE CQB AT-NY02-CQ (electric tape fixed this)
- The window on the side is tinted and not completely clear so a bit hard to see how many BBs are left in the magazine.

Meines Erachtens die besten Magazine die man aktuell für m4 Derivate erwerben kann. Funktionieren einwandfrei in meiner E&C mk18 gen 5 von dem großen B. Bezahlung und Versand ging super schnell . Einfach top Shop immer gerne wieder.

this is my first assault rifle that i bought and i am very impressed what you get for not even 200 euro.
straight out of the box i could compete with every other airsofter with any gun.
the build qualty is also very impressive nice a light but still feels strong would recommend this gun to everyone

One of the better brands for M4 magazines. It fits very well on my replica and I do not get any rattling sounds etc. When lubricated properly they feed well and I dont have any problems with them. Recommended!

El cargador es genial y alimenta la replica correctamente, cumple con lo que dice, se le puede poner a 30 bb reales o a 150 creo que era, fácil de desarmar para limpieza y lubricacion. Es genial compacto y cómodo al agarre, encaja a la perfección en cualquier replica

Alors là je dois avouer, je suis bluffé de la qualité des magazines, avec la petite fenêtre qui indique les 30 dernieres billes, le follower qui sort pour pousser toutes billes dans la réplique, le switch de passer de 30 (Real cap) a mid cap 130, la robustesse/solidité, a t'elle point que j'ai bien fait d'en acquérir 10 :)

Arcturus' polymer M4/M16 variable-cap magazines from TaiwanGun are an excellent choice for airsoft players. The magazines hold between 30-130 rounds, and their reliable feeding ensures smooth and consistent shooting. The durable polymer construction ensures long-lasting performance, while the variable-cap design allows for customization and versatility in gameplay. Overall, a top-quality product from Arcturus.

This mag fits every M4 I have, and they are amazing products! Cycles extreamly well and look good doing so. They might be pricier than the other ones but they are worth it!
Will be buying more of these!

everything was fine, I got what tehy promised, they came quickly. and that's what I love about them is easy to take apart or replace a part of each magazine and they were very helpful with the selection.

These are really solid, tough plastic that can take a bump or two. Feeds great straight from the box and switching from midcapacity to low is a cool feature.
They are thicker than some other 5.56-style magazines though, and can be tricky to fit into snug mag pouches.

Sehr gut verarbeitet ! Feeden einwandfrei ! Wartungsfreundlich und die 30 Schuss Funktion ist sehr geil. Material ist ein hochwertiger Kunststoff und keine Gussränder vorhanden. Das Schaufenster ist einfach so cool, hilft oft bevor man riskante Sachen wagt schnell schauen und wenn die Feder schon zu sehen ist hat man eine höhere Chance nicht leer zu laufen wenn man dann die Kugeln braucht !

Tested this magazine out with 3 different M4's ASG Devil, MTW HPA, and a Krytac, no feeding issues at all on any of the guns.

A neat feature that my team members also pointed out was the windows that shows how much ammo is left.

We where also very satisfied with the follower, it only allows 2 bb's to be lost on reload, where a standard mag, or even a PTS mag looses 4-5 bb's.

Downsides:
*the bottom plate is made of the same plastic as the rest of the mag.
*the mag wobbles in all 3 guns, but nothing a bit of tape won't fix

The mags are working perfectly, plus saved a lot of money on the deal! :)
And I love the fact that you can choose between 30 and 130 bb.
The quality is just amazing, good grip on them, they’ll won’t slip out of your hand!
I had 6+ 1 mags with me on the last game, and like this the game was just excellent.

Nice and light magazine. Very easy to change to the 30round feature. They took some unfortunate falls from chest height and they are like nothing happened. Will get some more probably, to carry only these. They also slide in and out of the gun like butter and i haven't noticed any play in the receiver.

Good mags, you can fit about 133 rounds in them. Easy to load, leaves 1or2 BBs between the mag and the gun. Great that you can see on the side window, if you have less than 30 rounds left.

Fits in all my m4's and feed great.
Very light ( almost scary).
Whats great is de nop so you do feed all the bb's.
Also the window on the side is nice so you can see if you got less then 30 bbs in your mag