AK russian side folding buttstock - Black [5KU]

Great stock for AK rifles, also a big surprice that it comes with zenitco markings that dont appear in the original photos. I can confirm that it is compatible with cyma AK74u, a bit hard to install but with some work it fits well without any movement, it needs a puece that holds the stock in place when it is not colapsed, in my case I used a piece of rubber. Will buy another in the future for sure.

The stock is very nicely machined and works perfectly. The adjustments are a very nice upgrade over a simple fixed stock. The only real downside is that there is no explanation on what to do with the little extra piece that comes with it and it leaves a gap at the hinge.

Very nice stock, makes the rifle really confortable to hold and aim.
The materials are great, and that makes it very sturdy and durable. The adjustibility makes it even better to personalise.
The only negative that if you fold it, you can’t click it in to stay in place.

Very well designed replaica and extremely close to the original.
Item has a great weight and full range of adjustment. Cheek riser, Length of Pull, etc. It really makes a good replacement on my CYMA 47U.
No instructions included for instal, but installation was easy. You just have to remove the pin from the original stock, remove the old stock, then insert the new one, add their included retention piece and re insert the pin.
There was some wiggle with the stock, but this was fixed with an O ring.

Really good build quality and good materials. Has a good weight to it, balance out the gun perfectly.
Love all the adjustments it has, from telescopic stock to the cheek rest riser.

Had a minor problem with a little wobbel between the weapon and stock, but that was fixed with a little O-ring at the end.

The metal parts are of great quality and machining. The only downside is the rubber. It looks used in some areas, like the rubber has been left out to dry. Installing was very easy. You will have a small piece with a hole inside, hard to explain installation process in text, but unscrew a set screw in another similar small piece, place the bigger small piece above and drive the pin through both the stock and the "extra piece". Sadly there are no videos explaining this process, so i had to figure it out myself. But if you look at Zenitco's official youtube channel, they have a similar "extra piece", but they place it on top, you place yours on the botton when mounting your stock. You can email me if you need help and i can send a video [email protected]