CM.701C-U Upgraded Version 520 FPS - Wooden Style [CYMA]

Wykonanie bardzo dobre. Choć łoże plastikowe, to nie trzeszczy, pewnie trzyma metalowe bebechy. W stocku na 0,4g BLS kulki co prawda dolatują na 60m, jednak skupienie niskie - trzeba będzie na pewno zmienić gumkę a i pewnie lufę na coś ciaśniejszego.
Na docelowym hopku powtarzalne 2,5J na 0,4, przy skręconym do minimum 2,9J.
Mechanizm przeładowania chodzi lekko, nie zacina się.

W tej cenie jest to topowy sprzęt, przy kulkach 0.32 mamy około 3 dżuli (~2.80) celność również jest dobra, w połączeniu z dobrą lunetą mamy sprzęt na fajny dystans z wysoką mocą, w moim zestawie były trzy magazynki, Polecam

Replika strzela na około 65m bez problemu, bez żadnych modyfikacji.

Zamek jak na karabin o takiej mocy chodzi strasznie lekko, mozna nawet pociagnac 1 palcem jak ustawi się pod dobrym kątem., jedyny problem to z podkręcaniem kulek 0.40 i cięższych, natomiast ulepszenie Hop-Up'u na naprawdę dobry to kwestia 200zł i wtedy za 700zł mamy serio okej snajperkę na start.

Tłok i wszystkie części wewnętrzne jak i zewnentrzne są z metalu (oprócz kolby która jest sztucznym drewnem), wydają się wytrzymałe. Za taką cenę naprawde czuję się jakbym coś ukradł bo replika jest chyba najlepsza w takim przedziale cenowym jeśli chodzi o snajperki.

Do tego wszystko w standardzie VSR-10. Co tu więcej mówić, jeden z lepszych zakupów jakich dokonałem.

Sklep taiwangun czyli lider w śród moich faworytów dlatego że mają normalne ceny dużo okazji i dają możliwość wybrania fps przy zakupie repliki co jest naprawdę dobrą opcją. Ta replika przy okazyjnej cenie wydaje mi się że jest najlepszą snajperka do 500zl replika strzela na ok 90metrów i kawałek gumy na końcu kolby przezco jest naprawdę wygodna jednym z najlepszych bajerów. W tej replice jest bezpiecznik który chodzi jak marzenie i wystarczy palec żeby do przesunąć dzięki szanownemu sklepowi taiwan gun nie musiałem bawić się w tuning niedługo kupuje boczniaka z najlepszego sklepu❤️ czyli taiwan gun. Polecam replikę w zestawie mamy 3 magazynki!

Dobry karabin do strzelania prosto z pudełka. Ma całkiem niezłą powtarzalność jak na replikę fabryczną (nie zmieniałem żadnych części). Na 50m spokojnie można trafiać w małą puszkę po napoju. Wykonanie bardzo dobre. Wygląd imitacji drewna zaskakująco dobry. Po wyjęciu z kartonu miłe zaskoczenie. Na zdjęciach wyglądał na bardziej plastikowy. Dopatrzyłem się co prawda 2-3 małych wad na łożu i kolbie ale są to wady kosmetyczne (przebarwienia i minimalne nadlewki) i musiałbym się mocno czepiać żeby wystawić za nie minus. Po miesiącu użytkowania (praktycznie codziennie) nie stwierdzam żadnych problemów. W warunkach -7 do +5 stopni spisuje się dobrze latem powinien działać jeszcze lepiej. Spasowanie elementów bardzo dobre, Magazynek siedzi ciasno i nie lata na boki. Po wciśnięciu przycisku zwalniania wyskakuje bez problemu. Jedyna wadą jaką zauważyłem to przycisk do zwalniania magazynka jest usytuowany w miejscu gdzie łatwo go wcisnąć opierając o coś karabin. Takie rozwiązanie stosują też inne firmy nawet w droższych modelach trzeba się przyzwyczaić. System TM VSR10 - czyli z częściami tuningowymi nie powinno być problemów.
Podsumowując jestem zadowolony z zakupu i polecam - w takim budżecie nie kupi się nic lepszego.

Lekka i poręczna. Zasięg spory, kulki lecą prosto na odległość ponad 50 mętów. Kolor drewna wygląda lepiej na żywo niż na zdjęciach. Dostawa bardzo szybka, paczka z lunetą, repliką oraz kulkami dobrze zapakowana.

Fajna, lekka, powtarzalna. Bardzo niska cena jak na ten produkt. Przy kulkach 0.43g w lesie 9/10 kulek trafia w cel wielkości tułowia przy odległości 90m. Gumka w normalnych warunkach daje rade natomiast na strzelance gdzie było -2 sporadycznie nie podkręci tam jak by człowiek chciał, natomiast jest to tak żadkie (1/20 strzałów) że nie można narzekać. Nedna z niewielu replik snajperek gotowych prosto z pudełka do strzelanek.

The gun was not usable upon arrival. I couldn’t properly insert the magazine because one of the internal parts was loose. One of the hex screws in the stock was just spinning freely—it was already stripped along with its thread from the start. I had to completely disassemble the gun and fix it with some help. Based on my first impressions, the build quality is not the best. It delivers the advertised FPS, but how well it will hold up in the long term is questionable.

Very good performance, 522FPS with 0.2 bbs. Solid replica, came with 3 mags (description mentions 1 tho) and a speed loader. Easy to pull the handle, but still powerful. Only downside is that the trigger is very wobbley. Moves too much, i will take it apart and take a look at it. I recommend this gun to everyone, it’s a vsr-10 compatible gun, lot of aftermarket parts to choose from.

4 days shipping, good customer service as always, keep it up Taiwangun! Have a good one

The CYMA CM.701 is an amazing starter sniper rifle, especially for the price. Out of the box, it’s solidly built with a sturdy bolt action and decent power. What really makes it shine is the huge upgrade potential — it’s fully VSR-10 compatible, so you can easily swap in better barrels, hop-up units, and triggers to make it competition-ready.

For under $100, you’re getting a reliable rifle that’s perfect for beginners or experienced players looking for a modding project. Highly recommended if you want great performance on a budget and a strong base to build from!

IMO the best bang for the buck, especially on sale; and it doesn't take much to turn it into a laser. But let's go over the externals first.

The wood imitation is great, doesnt have that cheap plastic feel, isn't glossy, it's actually really well made. The outer barrel is some kind of metal (most probably steel), along with the receiver, coated with a black matt paint. The barrel is threaded although i just cannot get the end cap to come off, it's glued shut, pretty sure i could get it open if i tried hard enough, BUT, even if you do, you need an adapter to mount your standard CCW 14mm thread muzzle devices, luckily Taiwangun also sells one so you can get it along with the rifle. The charging handle is not as well made tho, not like it's gonna crack or something but it's very wobbly, personally, i dont mind that much, but i know some people will so i thought i should point it out.


Now for the internals, the trigger is great, very light and snappy, everything you would expect from a 90° trigger really. The rest, isn't perfect, but there are some easy fixes. The cylinder is very loose inside the outer barrel, so it scratches against the walls making the bolt pull very rough.

Fix: get a piece of a plastic notebook cover or a PLA plate, cut it to fit the inner barrel part where the piston slides in without standing out the back, beware not to cover up the hole that feeds the BBs into the chamber; use some PTFE grease and that should do it. You can also look up some other tutorials for smooth bolt pull on YouTube.


The pneumatics... there is some compression but they leave much to be desired.

Fix: Screw off the cylinder head, apply teflon tape to the thread, before putting it back in place, take out the piston, cut a piece of electric or teflon tape, roll it up to fit the groove where the O-Ring goes on the piston, put the O-Ring back in place, apply some silicone grease and test if it fits into the cylinder. If it doesn't, get a smaller piece of tape, test and repeat until it goes in with some resistance, but not enough to rip the O-Ring. Even after that, it doesn't seal 100% but it's definitely better than it was stock.

Precision components, the barrel, chamber and bucking are okay. 0.40g BBs are the heaviest i managed to lift. Stock, it shot at around 2.1 Joule (measured with 0.40g BLS) and i could hit a human torso at about 50-60 meters with some inconsistencies.

Fix: Maple Leaf 430mm 6.02 inner barrel, Maple Leaf VSR10 chamber and Maple Leaf 70° Autobot. Total cost comes at around $50 (all available on this site).

All those upgrades gave me fairly consistent 2.5 Joules and range of 70+ meters (0.40g BLS). I'm not sure about the maximum range since i fired at a torso sized target at those 70m and the BBs were still flying straight :)


To sum things up; it's an okay rifle out of the box, with really well made externals and tons of potential for upgrades.

Overall, very satisfied with the gun :)

IMO the best bang for the buck, especially on sale; and it doesn't take much to turn it into a laser. But let's go over the externals first.

The wood imitation is great, doesnt have that cheap plastic feel, isn't glossy, it's actually really well made. The outer barrel is some kind of metal (most probably steel), along with the receiver, coated with a black matt paint. The barrel is threaded although i just cannot get the end cap to come off, it's glued shut, pretty sure i could get it open if i tried hard enough, BUT, even if you do, you need an adapter to mount your standard CCW 14mm thread muzzle devices, luckily Taiwangun also sells one so you can get it along with the rifle. The charging handle is not as well made tho, not like it's gonna crack or something but it's very wobbly, personally, i dont mind that much, but i know some people will so i thought i should point it out.


Now for the internals, the trigger is great, very light and snappy, everything you would expect from a 90° trigger really. The rest, isn't perfect, but there are some easy fixes. The cylinder is very loose inside the outer barrel, so it scratches against the walls making the bolt pull very rough.

Fix: get a piece of a plastic notebook cover or a PLA plate, cut it to fit the inner barrel part where the piston slides in without standing out the back, beware not to cover up the hole that feeds the BBs into the chamber; use some PTFE grease and that should do it. You can also look up some other tutorials for smooth bolt pull on YouTube.


The pneumatics... there is some compression but they leave much to be desired.

Fix: Screw off the cylinder head, apply teflon tape to the thread, before putting it back in place, take out the piston, cut a piece of electric or teflon tape, roll it up to fit the groove where the O-Ring goes on the piston, put the O-Ring back in place, apply some silicone grease and test if it fits into the cylinder. If it doesn't, get a smaller piece of tape, test and repeat until it goes in with some resistance, but not enough to rip the O-Ring. Even after that, it doesn't seal 100% but it's definitely better than it was stock.

Precision components, the barrel, chamber and bucking are okay. 0.40g BBs are the heaviest i managed to lift. Stock, it shot at around 2.1 Joule (measured with 0.40g BLS) and i could hit a human torso at about 50-60 meters with some inconsistencies.

Fix: Maple Leaf 430mm 6.02 inner barrel, Maple Leaf VSR10 chamber and Maple Leaf 70° Autobot. Total cost comes at around $50 (all available on this site).

All those upgrades gave me fairly consistent 2.5 Joules and range of 70+ meters (0.40g BLS). I'm not sure about the maximum range since i fired at a torso sized target at those 70m and the BBs were still flying straight :)


To sum things up; it's an okay rifle out of the box, with really well made externals and tons of potential for upgrades.

Very satisfied with the gun :)

I chose the wood color. The barrel is plastic, but the imitation of wood is a real eye-catcher. It's a beautiful sniper rifle. It doesn't creak or crack. If you want to put a carrying strap on it, you'll need a converter. The holes in the factory mounting points are tiny, so it's not suitable for a high-quality carabiner. You get two extra springs in the box. I can't wait to put the scope on it and see how it shoots. Double Bell has a similar vsr-10 replica with real wood for a little more money. However, there are hardly any accessories for it. Cyma's tuning options are almost unlimited, so I chose this one.

Really good sniper rifle! The only problem I had with it is the magazine release button is made out of cheap plastic and it broke, making it difficult, but not impossible to remove. Overall, the range and FPS are unmatched at this price with 0.4g bbs.

Really good sniper rifle! The only problem I had with it is the magazine release button is made out of cheap plastic and it broke, making it difficult, but not impossible to remove. Overall, the range and FPS are unmatched with 0.4g bbs.

This was my first sniper rifle,and it has pleasantly surprised me. It has a really good look,and feels like the real thing. Good weigt,its not a light weight rifle.The polymer handle really looks like wood also. The rest off the rifle is made of metal. In combination with a scope you can get pretty accurate shots. It also has an adjustable hop up lever thats easy accessible from the left side of the rifle
One thing you should look out for,is that you pull the lever to load the bibi firmly in one go. If you don't use enough pulling power,and release it before it tensioned the spring,it loads the bibi already,but it won't fire obviously. So you automatically do it again,but then you load a second bibi, and may potentially clog the barrel. But that's not a rifle error,but a human error. So make sure to firmly pull it. If you do clog it,there is a usefully tool in the box to clear the barrel from stuck bibi's. In the box you find 3 magazines. These are plastic, but does work pretty well,and sits flush in the rifle. It won't stick out from under it what I realy like. To release it simply press a button. You also recieve 2 extra spring to adjust the fps,this is realy a nice option as well. This rifle for the money is realy good in my opinion, and you won't regret buying it. Delivery is on point as well. Packed well,and they keep you updated all the way to your doorstep.

This is a very nice nice sniper replica. Most people go for the black one instead. It is always sold out. But i really like the brown one. Gives a different touch to it. The accuracy and precision on this thing is insanely good for the price. Thank you Taiwangun!

Good value for money starter sniper.
Especially with the upgraded parts, so solid base, solid parts and as always checked by Taiwangun.
3 mags included!! 2 extra springs and shoots as ordered and advertised.
5/5

I have used it 5 times , it shoots in a nice curve, I am completely satisfied with it. I chose the wood type, I really like its design. I recommend it to all beginners and non-beginner snipers for airsoft games, it stands up to its bigger names

9/10.
Out of the box gives 3,1 J while still very easy to operate. Easy 80 m gun, possibly 100 with proper flat hop. Internal trigger mechanism is steel, piston however aluminium using 45° system. Piston will eventually wear out but I would suggest swapping for steel only in case of breakage.
Holding it gives you surprisingly solid feel.
Excellent value.

This Replica is really amazing. This is very good choice if you dont want to spend a lot of money.
This upgrade is really powerfull, and you can feel the different between the original one. I think this rifle can be good starter weapon.
Thank you so much!