AK74U Carbine AT-AK06E [Arcturus]

The newes AK06 Carbine from MOS factory, is a magnificent carabiner from the AK family.
And also this time the carabiner combines a modern look with precision performance.

For years, MOS has been gaining experience, producing items for firearms as well as for the largest companies from the ASG industry.

The replica was made accurately and carefully.
The lower receiver is connected to a light RIS hand guard.
This model uses a collapsible stock made of aluminum.

NOTICE! Replica have a unique serial number!

On the hand guard and the stock there are points for assembly of the QD suspension.

Most of the external elements were made of metal.

It is noteworthy that, as in the original the receiver, receiver cover, the safety selector and the trigger guard together with the latch of the magazine have been cold pressed from steel sheet.
Following the original, the whole front and rear bases like the muzzlebrake and the bolt carrier were made of metal.

All these metal elements have been protected against corrosion, industrial method.

Gearbox and its interior are another advantage of this replica.
It has a quick spring change system and the spring guide, as well as the piston head, had bearings. Polymer piston is equipped with steel teeth that work with high-quality gears. Gears are mounted on slide bearings to be able to cope with the highest loads. Only the motor rack is mounted on ball bearings to ensure that it is free to spin at high speeds.

Inside we will find electric trigger "Micro Switch " that is connected to the low-resistance wiring, preparing the replica for cooperation with Li-Po batteries.
The use of an electric trigger eliminates the problem of burned out contacts and improves the response to the trigger.

The gearbox's finished with Teflon, sealed nozzle. Teflon provides durability and most importantly has very good sliding properties - no lubrication required It works with a metal hop-up chamber in which a hardened 6.01mm precision steel barrel is mounted.
The gearbox has been equipped with a spring tension release that has been placed next to the trigger. After the use of the replica, we can release the spring. The spring loaded lever will push the anti reversal latch to release the spring tension and makes it perfect for keeping the gearbox in top shape over time.

All materials and solutions used to create the replica put the company MOS in the lead.

The set includes:

• mid - 120bb / 30bb magazines

Magazine code matches: DMAG AK12/AK74 30/130rds Variable-Cap Magazine - BK
Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.