+48 123626134 shop@taiwangun.com
Zmień język na angielski Zmień język na polski Zmień język na francuski Zmień język na hiszpański Zmień język na niemiecki
Press Corner
Zaloguj | Zarejestruj
0 0

[Zestaw] Replika PM FN P90 z celownikiem [CYBERGUN] + Magazynek Low-Cap na 68 kulek do CM.060 [CYMA]

W skład zestawu wchodzą następujące produkty:

Chwilowy brak
Ten produkt jest aktualnie niedostępny
Powiadom o dostępności produktu

  • Formy dostawy

    Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy

  • Dane techniczne

    Aby zobaczyć dane techniczne produktu wchodzącego w zestaw kliknij w nazwę

    EAN 5904420017578
    Waga 2080 g
    Model Repliki Replika Airsoft P90
    Kolor czarny
    Materiał aluminium, polimer
    Rodzaj magazynka low-cap
    Rodzaj ognia ciągły, pojedynczy
    Materiał magazynka polimer
    Akumulator w zestawie NIE
    Rodzaj wtyku akumulatora mała Tamiya
    Rodzaj ogniw akumulatora mini
    Wersja gearboxa v.6
    Rodzaj łożysk stalowe ślizgowe
    Średnica łożysk 8 mm
    Okres gwarancji 12 miesięcy
    Hop up Regulowany
    Amunicja .23g, .25g
    Numer seryjny TAK
    Długość mm 500
    Pojemność magazynka kulek 68
    Długość lufy wewnętrznej mm 260
    Energia wylotowa pocisku J 1,49
    Prędkość wylotowa pocisku fps 400 FPS z kulkami 0.20g
    Średnica lufy wewnętrznej mm 6,03
    Ilość w opakowaniu szt 1
    EAN 5901698421953
    Waga 170 g
    Kolor przeźroczysty
    Materiał ABS
    Rodzaj magazynka low-cap
    Pojemność magazynka kulek 68

  • Recenzje

    • - 19.03.2026 napisał:
      Fajna, unikalna na polu bitwy, replika. Dobre i trwałe wykonanie. Osobiście wybrałbym jednak wersję bez kolimatora, ponieważ gram w hełmie z osłoną twarzy i ciężko się złożyć tak, żeby było widać celownik kolimatora.
      Ocena opinii: 0
    • - 26.12.2024 napisał:
      Bardzo fajny magazynek, na plus widoczne atrapy naboi i jakość wykonania . Warto dodać że kulki są podawane od dołu grawitacyjnie, więc każda kulka zostanie podana do komory hop-up. Do tego są lekko przezroczyste więc widać ile pocisków zostało. Po wpięciu do repliki nie ma żadnych luzów. Dla mnie w P90 Low-Capy są lepsze od Midów czy Hi-Capów, dlatego polecam.
      Ocena opinii: 0
    • - 26.04.2026 napisał:
      Works perfectly with my P90. I really like the top-down feeding system. it helps reduce the chance of misfeeds and keeps things reliable during games.
      The overall quality is decent, and a nice touch is the dummy rounds inside the magazine, which add a more realistic feel.
      Ocena opinii: 0
    • - 21.03.2026 napisał:
      This magazine works great with my p90 from cyma no problems at all!
      Feeds great only downside is the 68bb in each magazine, but this make it more tactical and fun and think before you shoot.
      Ocena opinii: 0
    • - 09.05.2025 napisał:
      I bought it cuz of Star gates, like most people do.
      Ive holded a real p90 a few times and i must say, this replica is realy close to real one in weight and in material.
      The upper part is from metal and everything alse is from polymer, the dissembling is like for the real one as well.

      My favorite part is the integrated aimpoint/red dot.

      I recommend this
      Ocena opinii: 1
    • - 14.04.2025 napisał:
      Really love this little P90. The weight is good without feeling fragile. A little over hopped out of the box with 0.3 bb's, but you can trim the nub quite easily. I personally only used the 68 shot magazines without any issues whatsoever. The replica is easy to take apart, and a quick release spring is something the cyma one lacks. They are both made by CYMA but the little touches make this one better for me than the cyma version.
      Ocena opinii: 0
    • - 26.03.2025 napisał:
      Very nice P90 magazines. The only issue i have with them (in my krytac P90) is that i have to push the magazine release forward to make them lock securely in place. No feeding issues at all, and loading them up goes quite easy, especially with a lever action speedloader and universal adapter for it. The design with fake bullets look is great, makes it look pretty realistic.
      Ocena opinii: 0
    • - 17.03.2025 napisał:
      Fit perfectly on my Marui p90, a lot of cheap but solid and strong.
      Only criticism Is 68bb only, you need at least 5 mags: maybe MAG brand with 120bb Is better choice but impossible to find
      Great quality/price ratio!
      Ocena opinii: 0
    • - 16.12.2024 napisał:
      I don't have a huge amount to say, other than they work and they're about as good a quality plastic as you'd expect. The dummy rounds is a nice touch, and there's no noticable wobble when inserted in the gun.
      Ocena opinii: 0
    • - 12.11.2024 napisał:
      Gyönyörű és remek minőség. Nincs adagolási probléma mint a nagyobb kapacitású p90 táraknál. Ezért az árért a legjobb választás. Ha itt az oldalon rendeli az ember még remek bundle-öket lehet találni ami még kedvezményesebb árban ad lehetőséget beszerezni több darabot.
      Ocena opinii: 0
    • - 03.10.2024 napisał:
      I Need the mags for Marui P90tr: great price buy really great quality.
      Perfect fit on AEG and no bb Lost during use: very similar with originale One, solid and reliable.
      Maybe 68 bb capacity is quite low and at least 5 mags are necessary for games.
      Service and item 5 stars
      Ocena opinii: 0
    • - 23.04.2024 napisał:
      Simply perfect, feeds to the las BB a CYMA P90 airsoft replica. Never bothered to find out how many BB's is holding in, I just stop using BB loader when reloading tension becomes a bit uncomfortable to carry on further. Actually I have difficulties to find out which one is the original magazine who came with the replica, and which is the new one.
      Ocena opinii: 0
    • - 07.11.2023 napisał:
      I bought as a spare for BY-810GS, but in the end it does not feed. I dont know if the problem is the mag, or the gun replica. The gun feeds with the original hi-cap magazine, but does not feed with the CYMA lowcap magazine. Could be either different tolerances and the off-brand mag does not fit, or the mag could be defective. Hard to blame. The design and fit and finish looks good anyways, and CYMA is known for decent goods, so I expect it just does not fit into BY-810GS
      Ocena opinii: 0
      Odpowiedź sklepu:
      Magazines from different manufacturers may require a slight adjustment. This is an unavoidable situation.
      Please feel free to contact our service department, we will be happy to help you.
    • - 08.10.2023 napisał:
      The mags are good, they feed well. The disasembly process is somewhat made more dificult by the dummy rounds, but if handled carefully, it can be fully disassembled for cleaning and troubleshooting,

      A tip from a redditor - if the mag isn't interfacing with the gun (like with the Double Bell BY-810/810GS) open it up to get acess to the BB release latch and put a piece of plastic from an old gift/credit card under the latch's leg. That will lift the latch enough to interface with the replica and feed BBs flawlessly.
      Ocena opinii: 1
    • - 26.07.2023 napisał:
      Ainda não tive oportunidade de experimentar pelo que não posso comentar de momento, contudo e aparentemente parece de qualidade aceitável.
      Ocena opinii: 0
    • - 20.07.2023 napisał:
      The only way you should feed a P90 with.
      There are also 150rd options, but these work the best, they are sturdy and despite their lenght and being plastic, they dont creak or flex in your pouches.
      I've run the first ones i bought in at least 100 games and I never had a single misfeed, and these are the same. Very nice mags
      Ocena opinii: 0
    • - 07.03.2023 napisał:
      I bought it together with my FN Herstal P90 Cybergun/Cyma.
      And it works great.
      Ones you get used to the new motion of switching the mags of a P90 you can change them without problem. (In contrast to the Fuxing mag which gets stuck in the gun.)
      The mag looks nice and is easy to fill.
      Overall would recommend.
      Ocena opinii: 0
    • - 24.11.2022 napisał:
      I had my problems with the mags. While they fit the by810gs, the mags themselves tend to jam, even though I use only g&g bbs and loaded them up roughly halfways to break them in. Taking them apart and polish the bb channels a bit seems to have solved the issue, but honestly I was expecting a bit more from CYMA mags. Granted, they are not TM mags, but still... Never had the problem with CYMA mags for M4 or AK
      Ocena opinii: 0
    • - 20.10.2022 napisał:
      Not truly compatible out of the box with the Bell P90 BY-810, it had feeding issues. it needed to press harder against the replica and the latch was too short. Easy to fix, but and I said, it didn't work straight away.
      Ocena opinii: 0
    • - 01.06.2022 napisał:
      These P90 midcaps fit perfectly on my Cybergun licensed P90. I compared my original P90 midcap with these and they both look exactly the same. Same color and number engravings. As for feeding, they work very well and there were no jamming problems, even on full auto. Buy these midcaps!
      Ocena opinii: 8
    • - 03.01.2022 napisał:
      The loaders are of very good quality, it recharges with a bb loader and the balls inside do not make any noise. It is compatible with the P90 type models. Very light and very practical to use. The decorations inside are very realistic. The model contains 68 balls for a low price.
      Ocena opinii: 0
    Dodaj opinię


Bezpieczne i świadome użycie

Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.
SKU: · EAN: - · [Zestaw] Replika PM FN P90 z celownikiem [CYBERGUN] + Magazynek Low-Cap na 68 kulek do CM.060 [CYMA] ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent
Osoba odpowiedzialna za wprowadzenie produktu na teren UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · shop@taiwangun.com
Producent:

REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH

Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail shop@taiwangun.com
* Ceny z podatkiem VAT, bez kosztów transportu