[Zestaw] AT-PPK20-PE z optycznym mosfetem PERUN, szybkostrzelność 25 strz./sek. [Arcturus] + Replika rosyjskiego celownika kolimatorowego typu VZ...
W skład zestawu wchodzą następujące produkty:
Chwilowy brak
Ten produkt jest aktualnie niedostępny
Powiadom o dostępności produktu
-
Formy dostawy
Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy
-
Dane techniczne
Aby zobaczyć dane techniczne produktu wchodzącego w zestaw kliknij w nazwę
AT-PPK20-PE z optycznym mosfetem PERUN, szybkostrzelność 25 strz./sek. [Arcturus]Replika rosyjskiego celownika kolimatorowego typu VZ-1 [JJ Airsoft]EAN 810127360099 Waga 2950 g Model Repliki Replika Airsoft PP-19 Vityaz / PPK-20 Kolor czarny Materiał aluminium, polimer, stal Rodzaj ognia ciągły, pojedynczy Materiał magazynka nylon Akumulator w zestawie NIE Rodzaj wtyku akumulatora T-connector Wersja gearboxa dedykowany Średnica łożysk 8 mm Okres gwarancji 12 miesięcy Amunicja .23g, .25g Numer seryjny TAK Długość mm 660 Pojemność magazynka kulek 95 Długość lufy wewnętrznej mm 320 Energia wylotowa pocisku J 1.27 Prędkość wylotowa pocisku fps 390 FPS z kulkami 0.20g Średnica lufy wewnętrznej mm 6.01 Ilość magazynków w zestawie szt 2 ETU MOSFET TAK EAN 5904420008040 Waga 425 g Zasilanie AAA Kolor czarny Materiał aluminium, polimer Optyka szklana Przyrząd celowniczy punkt Kolor podświetlenia czerwony Długość mm 71 Szerokość mm 54 Wysokość mm 41.6 Średnica soczewki wejścia mm 20 Średnica soczewki wyjścia mm 20 -
Recenzje
Dodaj opinię-
- 11.04.2026 napisał:Kolimator ten dodaje koszerności do Twojej repliki AK. Naprawdę świetnie wygląda całość. Duża przejrzystość przez niego. Do replik AK do CQB naprawdę robi świetną robotę. Całości świetnie wygląda i dobrze się z nim gra, więc to idealny wybór.
-
- 26.11.2024 napisał:Porządna replika, dobrze wykonana, niezawodna i prosta w obsłudze.
Dostajemy pełną instrukcje więc i zawarty w niej szczegółowy opis jak wszytsko robić. Na 11.1V sieje pogrom w cqb. Polecam dla każdego. -
- 18.04.2024 napisał:Fantastyczne replika dla każdego, kto lubi rosyjski sprzęt. Arcturus naprawdę się popisał. Już na starcie w pudełku otrzymujemy 2 magazynki, naklejki Arcturus(a), naszywkę, i przejściówkę, co czyni cały pakiet bardzo atrakcyjnym. Dalej jest jeszcze lepiej.
Plusy:
+ Wygląda fantastycznie
+ Sztywny korpus, który wszystko trzyma solidnie w jednym miejscu. Brak luzów i i ogólne wrażenie solidnej konstrukcji.
+ Obrotowy, wygodny w obsłudze Hop-up.
+ Pomimo dużej ilości stali, replika waży optymalnie, ani za dużo ani za mało.
+ Selektor działa idealnie, ma dodatkową blokadę nad spustem, dzięki czemu nie wyskoczy poza zakres ruchu (jak w AK-12)
+ Doskonale działające i niezawodne bebechy wraz z PERUN(em) funkcjonują idealnie
+ System wymiany sprężyny, prec lufa 6,01 w zestawie, dobry hop-up czyni replikę kompletną i nie wymagającą modyfikacji
+ PERUN czyni replikę bardzo wszechstronną.
Kilka problemów, które dostrzegłem.
Minusy:
- Lekkie luzy przy wysuwanej kolbie (standard przy takich kolbach)
- Przycisk składania kolby jest twardy także należy włożyć troch e siły przy rozkładaniu
- Magwell jest zbyt luźny, polecam dokleić dwustronną taśmą lub klejem. -
- 16.04.2024 napisał:Stawiam 5 z dużym plusem swietna replika kolimatora typu za wschodniej granicy.
Zamontowałem na skosnej szynie pod cqb na asku Arcturusa płynie mogę przechodzić z vz 1 na lunete celowniczą tej samej firmy jj airsoft kiedy czyszczę pomieszczenie.
Solidna kostrukcja i przycisk umożliwijacący szybki przeskok różnej wielkośći kropki celowniczej pierwsza klas kiedy liczy precyzja oraz czas .
Przy zakupię nie patrzę się na cenę ponieważ jak dany produkt ma służyć i się podoba nie żałuje ani grosza.
TG na plus pozdrawiam . -
- 08.04.2024 napisał:Wykonanie na bardzo wysokim poziomie, brak jakichkolwiek luzów. Komora rotacyjna, ala tdc jak w combat union i stalowa, dobrej jakości lufa. W tym przedziale cenowym nie ma sobie równych, piszę to jako właściciel marujców, vipertechów i kilku topowych elektryków.
-
- 19.02.2026 napisał:A great solid red dot for your russian style airsoft replica.
Also props to the service team of taiwangun for the great support.
I received a defect on arrival red dot and they coverd all the shipping costs and deliverd me a replacement one. -
- 03.04.2025 napisał:This replica is awesome.
I already have 1 replica like this, but when I saw the sale, I just couldn't resist buying 1 more -
- 04.03.2025 napisał:Fast and effecient delivery, great gun and all as promised. Excellent quality, rate of fire great and the perun mosfet does it's job well. Great trigger responds. For the price this is a killer deal!.
-
- 03.03.2025 napisał:Did not know when i ordered but this is a limited piece, would be nice to have rails on the left side on the handle because as a left handed birdperson i cant put the light on the preferred side. The stock wobbles a bit as standard but mine after a day of touchy touch it became so loose i tought i broke someting but its only the main screw that loosen up. A drop of thread locker fix the problem. Besides the stock that happens often as i read on the forums the pewpew is really good and I can recommend for anyone!
-
- 10.12.2024 napisał:Vero nice replica….one of the out of the box in my opinion…arrive with 2 mid cap magazine.. deans cable and gadgets…replica is very solid and similar to the real steel…fast shipping …arcturus is a vert goood surprise
-
- 11.11.2024 napisał:Out of the box the replica appears very solid, it is extremely ergonomic and light, so much so that it could be held with just one hand. The polymer stock was shaking a little but just removing a pin and tightening a screw fixes the problem, it is now solid and doesn't move a millimetre. The mechanics are excellent, the trigger is extremely responsive and the rof is high. The quick spring release is also very convenient. I give it four stars because of the front sight which is solid but slightly inclined to the left, so when aiming the replica shoots very far to the right. I didn't expect such a flaw from a replica with such refined exteriors. From the beginning I had intended to use a red dot so the problem is not that serious, but in fact this defect took away my possibility of choice. Other than that, the replica is wonderful, I recommend it.
-
- 05.11.2024 napisał:This is a solid red-dot made out of aluminium and clear glass. It's got enought brightness to be seen during the day. You can zero it in, and it'll hold zero just fine. Perfect for two eye shooting and staying true to your Russian bias larp. The sight comes mounted on a high mount so you can still use the AK iron-sights. But you can also remove the stilts inbetween for a low mount. It might be a little hard to aim the MOA2 size dot, but you'll learn to aim with it.
(If the red-dot blinks before turning off, your battery is dead.) -
- 21.05.2024 napisał:This optic is solid and very durable. It has several additional parts just like honey comb kill flash and protective caps with different styles.
The brightness of the red dot is visible even during daylight and it is easy to adjust it's brightness with the buttons.
It has a weight but you receive an aluminium mad red dot which in this case is a guarantee of quality. 10/10 -
- 06.03.2024 napisał:Bought 2 of this in pair. One working just fine other one had some problems with plus and minus buttons. But support from taiwangun was good and they responded in time. Other one works fine and holds zero after 2 games of active playstyle. Worth it in my opinion quality is very good and using aaa batteries which are very common.
-
- 12.01.2024 napisał:
Beautiful replica! Well made and sturdy. Just a little bit of wobble on the stock but nothing too annoying. Performance on top out of the box. The only thing I would check is the bucking because with the hop up completely down it doesn't feed the bb's but I guess it's normal for a rotatory style hop up. -
- 13.12.2023 napisał:the product is wonderful from all points of view!!! Very compact and comfortable to hold, very precise shot and the control unit responds perfectly. the single-stack magazines engage without movement.
-
- 08.12.2023 napisał:Nicely made, sturdy replica, much better than the cheap Chinese T1 copies, it comes with a raiser, killflash, clear lens protector and standard lens protector. The only downside is the missing instructions, it is not obvious which button does what. It seems it can be switched off by pressing the + and - buttons together.
-
- 17.11.2023 napisał:Sturdy build and overall good quality but I don't like how attaching the honeycomb is permanent. Wish there was a way to remove it without damaging the ring. I also don't like that it relies on the 60 minute turn off instead of also having a normal off button.
-
- 30.09.2023 napisał:Had really fun with this testing in my yard and In two indoors games, And for now I can't find anything to complain about, weapon is very solid build, absolutely zero wobble and it feels very good in hands. Weight is nice not too heavy or too light. Accuracy is very good, finally i got some head shots. trigger response even in factory settings is very good and even you can change setting like trigger response fire modes but i personally like more basic factory settings. gears inside this are top notch and personally cant find any reason to replace any of them so i think this very stress free replica to choose but only if you maintenance it occasionally. spring change is super easy, just open top cover and remove one screw, rotate, pull spring out and change, for me this makes this replica beginner friendly. 5/5 recommend.
-
- 03.09.2023 napisał:Wonderful compact red dot!
The dot is sharp, no problem with outdoor playing.
Almost too many settings.
The QD mount did not fit my lct rail. So had to modify the rail a bit.
Works great on my AKMSU now after the rail is modified.
Comes with many accessories.
Would buy again!
-
Bezpieczne i świadome użycie
Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.SKU: · EAN: - · [Zestaw] AT-PPK20-PE z optycznym mosfetem PERUN, szybkostrzelność 25 strz./sek. [Arcturus] + Replika rosyjskiego celownika kolimatorowego typu VZ-1 [JJ Airsoft] ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent 

Osoba odpowiedzialna za wprowadzenie produktu na teren UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
Producent:
REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH
Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail [email protected]
* Ceny z podatkiem VAT, bez kosztów transportu
