CM.041H Upgraded Version [CYMA]

Porządna replika, super ROF, całkiem celna w stocku. Jedyne o co się martwię to układ MOSFET, dlatego moim zdaniem można go z czasem wymienić na coś lepszego. Idealna do CQB ze względu na swoją długość.

bardzo dobra replika za te pieniądze jakość wysoka po obejrzeniu kilku filmików w internecie zdecydowałem się na zakup i nie żałuję repliki byłem zadowolony można długo rozmawiać i lepiej widzieć Polecam.

Naprawdę świetna replika, z opinią wstrzymałem się do 1 strzelanki. Sprawia wrażenie solidnej, wytrzymałej i dobrze spasowanej. Mój egzemplarz strzela bardzo równo, kulki trafiają bardzo celnie. Dodatkowo ma szybką reakcję na spust i ROF w trybie auto (ok. 16/s) nawet używając LiPo 7.4V (w internecie można znaleźć ostrzeżenia, że na 11.1V styki MOSFETu się topiły).
Podczas gry replika była przyjemnie ciężka, ale nie przeszkadzała zbytnio swoim ciężarem, celność była naprawdę świetna. Pomimo niekorzystnych warunków (temp. -3°C, opady śniegu) udało mi się bez wymiany baterii (7.4V, 1100mAh) wystrzelić ok. 1500 kulek.
Z wad mógłbym wymienić nieco ciężko chodzący selektor ognia - momentami ciężko trafić w Semi, ale chwili używania nie miałem najmniejszego problemu z wybraniem odpowiedniego trybu ognia.
Definitywnie polecam replikę każdemu, kto szuka dobrej MP5.

Bardzo fajna replika już w stocku pod CQB zasieg w sgranicach 40m na kulkach 0.28 i przyzwoity rof i nie wiem czy ylko mój egzeplarz ma takie luzy na selektorze ognia czy po prostu ta replika już tak ma

Z czystym sumieniem, mogę polecić powyższą replikę wszystkim wymagającym, jak i początkującym graczą.
Spełnia ona wszystkie oczekiwania w rozgrywkach cqb jak i w lesie da sobie radę.
Replika jest nie wielkich rozmiarów, lekko masywna, ale wygodna i poręczna, na plus jest regulowana kolba, która pozwala na poprawę wygody użytkowania.
System m-lock pozwala na szeroki zakres modyfikacji dla fanów gadżetów i akcesoriów.
W tej cenie jest to doskonały wybór na replikę, która będzie służyć długi długi czas.
Każdy kto taką replikę zakupi się nie zawiedzie i będzie z niej zachwycony.

Super replika. Mocna, piękna i dokładna. Zarówno do CQB jak i do lasu na mniejsze odległości. Wali spokojnie na 50 metrów z dobrym kolimatorem. Polecam raczej kulki 23 a nie 25 bo gorzej latają te cięższe - a przynajmniej tak mi się wydaje. Jeśli ktoś chce dokupić tracer albo tłumik to max 10cm bo lufa jest krótka i za szybko podkręca kulkę.

Replika godna polecenia! Solidnie wykonana z dobrych materiałów i o fajnych właściwościach strzeleckich! Mimo drobnych wad kupił bym ponownie!

Szybkostrzelność, rozmiary, wykonanie

Waga- jak dla mnie trochę za ciężka.
Selektor trybu ognia - Zmiana położenia jest wyczuwalna, ale nie zawsze idzie trafić w odpowiedni tryb ognia

The handling of this gun is great. The weight distribution is perfect, the center of mass is right around the mag well.
One thing to keep in mind is that because of the AR style buffer tube, the iron sights are difficult to look through.

I bought this replica with my own money and i can honestly say it is one of the bether MP5 replicas out there . It has a few drawbacks like a hopup unit that needs ajusting often or the loose fire selector but other then that it is 100% wort the money. Build quality is preaty good and the gear box is honestly one of the best ones i had in a factory replica. On 11.1 lipo i am able to achive a realy nice triger response and 25rps. I woul recomend this replica to anyone who is looking for a budget MP5 style airsoft gun 4/5 stars.

Do not wait if you want to purchase from here! Faster and cheaper then any of the competitors. Very happy and do not regret. I told my whole team and now we have a new go to site for guns. The cyma works beautifully on a 7.4 and shoots a consistent 330 fps with .20s

Gun is great, feels solid, looks great. Gear box sounded great. Selector switch is a really poor
It works but it should be better. The box it came in was mangled with holes in it.
I would like to see some mlock rails incuded. like the flash hider
Trigger is snappy for a short barrel accurate. For me I like.25 .28. Whish it was a regular hop up.

Beautiful gun, very sturdy with enough space in the stock for a lot of batteries, it's just a shame theres a lack of mp5 hi-caps out there. Overall, love it, love the rail, love everything but the mags.

Shimming sounds great, the metal build feels durable in the hands, full auto is consistent, semi is snappy, only gripe is the etu, if you plan on running 11.1vs get a perun or a titan, overall I definitely recommend this gun to anyone looking at it

I was really impressed with this one. The wiring in the back is done wonderfully, you can hear the MOSFET load up when plugged in, the build quality on the externals are phenomenal. Very sturdy. Nothing wobbles, including the stock. All the upgrades I had put on my 15 year old MP5 are in this from the factory and the gear box is probably the smoothest I've heard out of any of the guns I own. Like absolutely perfect.. no gear noise, just the sound of the piston compressing air. Very impressed with this one

Honestly is one of the best airsoft replicas i have ever purchased.The construction of the gun is for most of it made of metal parts,and some plastic ones.It has a nice heft into it that i count as an positive.The only bad thing for me is the hop-up selector being very sensitive.But in generall is an very good gun.

Another excellent gun from Cyma!
This MP5 has a nice solid feel, and has a lot of customization options off the bat. The pre-installed picatinny/mlok rail allows for attachments as desired. The gearbox is flawless paired with Cyma's high speed motor. The charging handle also definitely feels like it cam be HK slapped for a while. It's amazing that I can get an amazing gun within ten days, to Hawaii from TaiwanGun, all while being packed together with other items very professionaly and tight. They are simply amazing, along with this gun.

So this way different over other mp5 models I've owned. Having owned many m4 models this by far simpler to take apart to service. When I say service I mean just that. OTB you must be careful how gun is put together from factory. The shimming is bad on the bevel so whenever you pull the trigger is gives off a whiney sound from the grip. Internals such as micro switch / gears 13.1 short stroked 4 teeth / compression components all are actually great components put together.
However... I did mention I owned many m4's so I have bins full of spare parts for a V2 gearbox.
First thing to see if gearbox was shimmed properly was I put in a 28 tpa motor. After semi and auto dry fries gears froze. I mean if you don't know what it sounds like to have gearbox shimmed just right. You are more than welcome to keep using it until gears destroy itself. Just don't expect nothing to happen when you change parts from what was originally in the gun from factory. Because truth is something is going to happen. The faster you try to make the gearbox go the stock parts won't handle to load.
Piston is a full metal rack. Not glued in the spots that tend to break. I changed entire thing. Cylinder ported on one side nozzle attached a had a good seal. Still it wasn't to my liking. So I replaced it all to something with better compression output.
Gears did have a few shims. Just was on the wrong spots. I had to add a few more. Oh factory grease had to go. Stuff is so sticky how do you expect gears to move freely if gears just stick together?
OEM mosfet had to goooooo. Being stuck with using a 11.1 with 20c only bat meant I couldn't span the trigger during those times you are giving cover fire for teammate to advance. So I changed it out to gate aster. If you are a good tec all these things I mentioned you know how fast I got this smg going...?
With stock spring fps went down to 294 / however rps went to 46. That's with mid cap mags. That's waaayy to fast for me so changed spring to m120 - fps went to 343 rps went to 36 which is comfortable for me. Oh forgot to mention I switched motor to a brushless 30k warhead black.

I really like the gun that I got. It shoots great and feels like the real thing. The only issue that I have with it is that some of the screws that hold the frame on were stripped out. I had to run a tap and tape through them in order to get it to hold. Other than that it runs great.

Je ne peux pas donner les 5 étoiles sur 5.

Il y a des défauts qu'on ne peut pas passer à côté, ils sont réglables/fixables mais pour un néophyte vaut mieux pas s'y aventurier.

Les défauts :

*Le poids pour certains
*Le réglage HopUp qui ne reste pas (trop de jeux)
*Le sélecteur de tire (dure a rester sur le demie)

C'est les seuls "problèmes" qu'il y a. Pour l'instant après 2 partie (CQB et externe).

Le reste n'est que plus plaisir !
La réplique inspire confiance, la solidité à toute épreuve, et un design qui fera ses envies sur les terrains !

Tu cherches une réplique qui a une cadence de fou ? ✅
Tu cherches une réplique qui a de la gueule?✅
Tu aimes du compacte pour du CQB mais qui rivalise aussi en externe ? ✅

Alors fonce ! Et mets y une 11.1 et fait leur mordre la poussière

Great airsoft replica full metal construction is really durable and feels great also the trigger feels super snappy right out of the box. The M-lok rails also make it super customizable I personally have already replaced the handle for a fancier look.

The gun is heavy and the fire selector is mushy, but those are my only two issues. The fire selector I can easily fix and the weight just means it is quality. This is the best gun I own. The stock has enough room for a 3000mha cylinder battery, which will last you all day.

Excellent rof,excellent trigger response on a 7v and even better with a 11v (make sure your c rating is 20 or 15 so you dont burn your etu). best upgrade you can do imo is bucking nub and eut swap *when it breaks*. Only grip i have is that the hopup adjustment level moves when you fire ootb so best thing to do is put a o ring or spacer/washer in between the hopup arm screw and the hopup chamber itself.problem solved,hav etwo might get another soon (: totally recommended!

One of the most reliable and pleasing looking mp5's I have ever owned. Ready to play out of the box airsofts are always the best kind and this gun can certainly give you that. Fast, reliable and accurate, this gun has it all. The amazing design of this gun is not the only amazing design which it has. The gearbox is just soo well built and designed that it's fantasic. Changing the spring on weapons can be such a hassle, but luckily all the platinum versions of this mp5 have a quick switch mechanism. I would definitely recommend this to anyone who loves simple but well designed guns.

This gun is heavy.....duty. It's a lot heavier than I thought it would be. No it so heavy to make it a pain, but I don't think the externals are going to break any time soon. The stock on this gun is nice. I really like the mini crane stock it comes with. It looks good. However, there is NO way you will fit a 9.6 in it, which is fine with me. I run lipos anyway. It fits my 1200mah stick 11.1 and 1200mah 7.4 batteries. Basically if it fits a buffer tube, this gun will fit it. I only run a 7.4 though. The muzzle is pretty slick to on this gun. The quick detach muzzle is a breeze to take on and off. Under the quick detach is the 14mm negative threads that have an orange painted thread protector on it. That's the part that is painted. The quick detach muzzle device is black. It came in the box, not attached to the gun when it arrived.

Without opening the gun up, it shoots really smooth out of the box. I did NOT get the re-lube and shim from Taiwan Gun. I should have, but didn't realize it was an option (first order from this website). The trigger is my favorite thing about this gun. The reset on it is so light it's nuts. It's a little hard to get used to, but with time I think I'll be able to really put rounds down range. I have other guns with electronic trigger groups, but this one seems the smoothest, and shortest reset for sure. The gun sounds good when shooting. No gear grinding or anything like that.

The mag that came with the gun is nice. Other people on here say they feel cheap, but I think they feel good. Not steel by any means, but really nice. Like they could be dropped at least a few times and not break. However, I wouldn't drop them a bunch. They have fed flawlessly for me so far. Only a few games in.

I live in southern Utah, United States. The gun got to my door in exactly a week. Evike takes about that plus or minus a day to ship to my small town. So quite impressive if you ask me. Roughly the same shipping time for me half a world away as more "local" shops.

The price on this bad boy was incredible. I paid $260 shipped for this. It's currently $320 on evike shipped. Saved me $60 to get it from Taiwan Gun. The price freed me up to purchase 5 addition mags and some .28 bbs for the same price as the gun only elsewhere.

All that being said, there is one thing I don't care for on the gun:
The fire selector switch. It's kind of janky on my gun. If I move it just a little to hard it goes to full auto, even though it is closer to semi on the switch. And visa versa. It's a little rough, and hard to switch. I can easily look past it for the price however.

The only other issue I have is with Taiwan Gun itself. Why didn't I know about you sooner? I have bought 7-8 bigger guns in the last year, as well as 3 pistols and I would have definitely considered you guys for most of them. I know it's on me for not researching better of course.

Last thing, I was sceptical of ordering from Taiwan Gun seeing as how the gun is coming from another country. BUT, I would do it again without any hesitation. No matter what platform you are on researching guns if Taiwan Gun is brought up, they have a rep there to answer questions directly or to get info from you to better answer. I really liked that. Most all comments regarding them are positive. Don't hesitate to buy from them if you are from the U.S. they are reputable and fair in price. I don't know about a tual customer service for issues on purchased items, seeing as how I haven't had an issue, but I imagine they will be good.

Amazing weapon at close/mid range, comfortable to hold and to carry. Love the design and the speed of shooting, 24-26 bb's/second, but because of this, needs a lot of magazines. Has a bit of a problem with hop-up, after adjusting and shooting couple bb's it gets down, but it can be fixed with rubber spacer, just make sure you don't tighten the screw without spacer, it can broke the part. Had one game with it, looking forward to many more, highly recomend.

I love it. I just took from from the box charged a battery for it and everything was perfect.
The RoF and the accuracy better as I expected.
The price and it's performance is perfectly balanced.
Very good deal.

I love this gun! The performance out of the box is outstanding, the gun looks great, there is plenty of space to mount whatever you need(optics, flashlights, etc.) and the polymer mid cap it comes with feeds great. I would definitely recommend this gun.

Gun shipped fast, arrived well package, and performs just as I hoped. Solid build quality, strong feeling internals, and functions flawlessly. With the short supply in the States, this gun was cheaper through Taiwangun.com by $50 even with the shipping...and it got here in less than a week! Very impressive. I've already added a red dot and ordered extra magazines. However, the mags I purchased were hi-cap, and I would not recommend those. Just stick with the mid-cap or get a drum mag. The hi-caps might hold more, but the need to constantly wind them makes them rather inefficient in my opinion.

This replica is outstanding. The look and feel of it are robust, and authentic to it's real life counterpart. CYMA currently offers in my opinion the best all around package straight out of the box for this style of replica. Offerings from other companies with trademarks need serious work, and cannot compare. The standard V2 gearbox layout also allows for plentiful upgrade potential. It shoots flat and consistent with stock internals, and has a wonderful RPS. I was easily reaching out to 150 feet with some slight adjustments to the hop-up. Cheers!

Najboljša replika kar sem jih kdaj kupil. Ob prejemu sem bil presenečen, ker je bila dosti težja kot sem mislil, da bo, ampak sem se zelo hitro privadil. Replika deluje kot mora, sicer sem dodelal na njej marsikaj in je res božanska! Replika brez problema podpira SP 130 vzmet.

This is my favorite mp5. Very snappy, sturdy build and packs a punch. Already tested in a skirm. It has a good range and is very accurate, i love this replica. With Cyma platinum you get the most out of a replica for an even better price!

Perfect replica, shoots accurate and every shot is exactly 1.04j without fail. Love the sound and sesitivity of the trigger.

Only thing that is not perfect is the full plastic mag that comes with the model, in comparison with the replica it feels flimsy. Not that it matters much because you can get a high cap.

So far, only fired a few mags through with an 11.1, trigger is snappy, extended mag release is awesome, whole gun is solid no wobbles, only realization is that the stock is absolutely tiny. But other than that amazing gun

I mean what can I say that hasn't already been said! It's a Cyma platinum, it's a powerhouse of an Aeg for under 300. This thing runs like a $600 custom gun, it's trigger pull is smooth as butter and it's so snappy it's unreal. Absolutely reccomend

My third ever MP5. Definitely the best one yet. It is solid, snappy and accurate. The telescopic stock was a really good addition, giving us a rear wired gearbox AND adjustable stock. As compared to older models where you either had rearwired and a fixed length stock, or adjustable stock and front wired gearbox.

Great fun when accompanied with an underbarrel grenadelauncher, a tracer unit and a drum mag.

This review will be more technical than just "Oh fantastico, buy It!".
Let's start with the pros :

EXTERNAL

-external materials 9/10 , very good polymer and solid metal (even though It scratches easily, thats why it's not a 10)
-tolerances 10/10 , nothing to say, Just perfect
-mags 10/10 , accepts drum mags (g&g) WITHOUT modifications
-battery 10/10 , supports 7.4 and 11.1 without problems

INTERNAL

-very good torque motor (nothing special)
-12.1 gears with -4 ss (they are very similar to shs)
-8mm bearings (good ones)
-brass barrel
-stock deans
-good ariseal (bore-up stile pistone head/cilinderhead)
-QSC (Quick spring change)

Cons :

EXTERNAL

-no logos (although i like It more without)
-plastic Seat of the screws (motor grip)

INTERNAL

-grease it's made of glue (?) It's hard top remove It, too dense
-must redo shimming
-tappet plate too elastic and deformable (after a few shots it's already deformed)
-piston too heavy
-one of the worst hopups i've ever seen , the regulation isn't precise, the regulation rod it's very slack (can be fixed, but i don't know how much it can last, would be fantastic having an aftermarket piece well done)
-you Need to change INSTANTLY the mosfet because It will break after a few mags (i had/opened 3 and a of them had this problem), sad because It was a wonderful idea

How to custom it :

Change the tappet plate (V2 One) with a good one (get rid of the delayer and cut the tappet) , clean, reshim and relubricate. Put an m100 (mine was a guarder) to stay under the joule (around 0.9j). Put a titan in it , and, of all done, correctly you should have a replica that sounds like an hpa , shoots really well.

Final considerations :

Really good asg for the price , you get what you're paying for.
Stock with 11.1 you get 25bbs, After the custom you can get like 30/31bbs..get one of these instead of some fancy overpriced brand.
Recommended.

This gun shot so well out the box, I was very impressed. I got to take it out this past weekend for it's first time and it shot so straight and accurate. Zero complaints and highly recommended. The stock magazine is the best MP5 magazine I have ever used. Fed consistent and holds 130 rounds. For the price you cannot beat it.

Great quality replica for the price. Nice and heafty feeling full metal mp5 with a mosfet that gives it a nice quick rpm. Would recommend to people whos looking for a well made mp5 replica. And one more thing. Its cheapest here in taiwangun webstore. All the other stores that ive seen it being selled at are a lot more expensive. If you are considering buying it, then you do it here.

Great build quality, on the heavy side. Stock and mag wobble. Came with the manual for old version. It shoots very accurately and fast using 11.1v. But mine it keeps shooting to the left although the grouping is very tight

I have a old MP5 from JG and this is a must upgrade.
The metal body and external acessories makes it realisticly heavy, the trigger and the selector are great and with good travel.
The buffer tube gives you more space that you could have with a PDW and lets you chose other stocks, BUT the stock came snug on the buffertube with litle to no woble and the rubber shoulder pad its great. I did it help to make the gun heavy since it looks like the plate where the buffer tube is tighten is the base for the PDW one since it has holes for the sliding rods.
The hopup needs a bit of tunning and shimming since i can see it losing the adjustment over time with the use.
Didnt opend the gun (yet) but the sound out of the box was a bit noisy and i needed to adjust a bit the motor set screw.
The mag it cames with it very good and I will get more, they have been feeding good with no problems as recommended for all mid caps.
The top rail helps alot to mount sights and acessories along with the mlock rail.

Gave it 5 but the things i saw wrong can be from my gun and not the others.

Extra: The manuals it came with... They are old, stock from older models, and 50% dosent work for this model. There was no indications for mosfet behavior (the sounds and LED colors)

I like it over the pdw stock because you can put any stock you want over the buffer tube. Also heavier than I thought with the metal rails/handguard. Performs great but one issue I found is that the hopup gradually resets to 0 when I fire (a common issue on AK/MP5 hopups). Adding a O-ring to the screw helped a little, but in the end I had to add a metal tie to keep the hopup in place.