[Zestaw] Licencjonowana Replika pistoletu STACCATO 2011 C2 (Upgrade Version) [EMG] + Magazynek na Green Gaz do R501/R603/R604 [Army Armament]
W skład zestawu wchodzą następujące produkty:
Dostępny
Nasza cena*:
$183.00
-
Formy dostawy
Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy
-
Dane techniczne
Aby zobaczyć dane techniczne produktu wchodzącego w zestaw kliknij w nazwę
Licencjonowana Replika pistoletu STACCATO 2011 C2 (Upgrade Version) [EMG]Magazynek na Green Gaz do R501/R603/R604 [Army Armament]EAN 5904420017011 Waga 900 g Model Repliki Replika Airsoft 2011 Kolor czarny Materiał metal, polimer Rodzaj ognia pojedynczy Materiał magazynka metal Typ magazynka green gas Okres gwarancji 12 miesięcy Blowback tak Hop up Regulowany Numer seryjny TAK Długość mm 210 Wysokość mm 145 Pojemność magazynka kulek 28 Długość lufy wewnętrznej mm 85 Energia wylotowa pocisku J 0.95 Prędkość wylotowa pocisku fps 320 FPS z kulkami 0.20g Średnica lufy wewnętrznej mm 6.03 Ilość w opakowaniu szt 1 EAN 5901698499464 Waga 380 g Kolor czarny Materiał metal Rodzaj magazynka low-cap Typ magazynka green gas Długość mm 145 Pojemność magazynka kulek 28 Pasuje do 2011 -
Recenzje
Dodaj opinię-
- 21.07.2026 napisał:Pistolet świetnie wykonany zewnątrz jak i wewnątrz ,bardzo dobrą celność z pudełka bez zmiany gumki ani komory przyjemnie się z niego strzela na plus stalowe elementy spustu odrazu w standardzie.
Nie wiem czy to problem w moim przypadku ale chcąc zamontować kolimator RMR do płytki w replice śruby montażowe od kolimatora mają za duży gwint warto to uwzględnić kupując kolimator -
- 16.06.2026 napisał:Jedna z pierwszych replik które strzelają świetnie zaraz po wyjęciu z pudełka. Zamontowałem kolimator, nabiłem gaz i załadowałem kulki 0.28g... wiecie co? Trafić w sylwetkę człowieka z odległości 40m to czysta przyjemność.
Wykonanie w tej cenie jest na świetnym pozniomie, zarówno zewnętrzne jak i wewnętrzne. Nie zamierzam robić żadnych modyfikacji więc naprawdę polecam.
Pudełko ładne a w środku zabezpieczone z klasą. Produkt z highend, dla mnie topka ;) -
- 04.03.2026 napisał:Replikę mam już przez kilka tygodni sprawuje się bardzo dobrze. Jest celna jak na krótki i średni dystans. Jedyne co mi się w niej nie podoba to jak szybko używa gaz. Chodzi płynnie, blowback jest przyjemny. Jeśli chcecie kupić wierną replikę oryginału to tą replikę bardzo polecam.
-
- 19.11.2025 napisał:Magazynek na Green Gaz do R501/R603/R604 [Army Armament]
Magazynki pasują idealnie do Staccato 2011 P. Kontakt ze sprzedawca bardzo dobry. Szybka dostawa towar zapakowany do wysyłki bardzo dobry.Polecam produkt i sprzedawce. -
- 28.09.2025 napisał:Magazynek jest szczelny i dobrze wykonany. Dodaje wagi replice co jest w moim odczuciu atutem. Przy maksymalnym nabiciu gaz starczy na ok 34 co również plusem. Po wielokrotnych testach nie mam zarzutów względem tego produktu.
-
- 16.03.2025 napisał:Pistolet rewelacja, magazynek również!! Dokładnie o to mi chodziło. Strzela i wygląda super!! Serwis spoko wszystko działa. Jestem zadowolony i polecam wszystkim. Ponadto byłem na próbnym strzelaniu w Airsoft Shooting Park Kraków gdzie otrzymałem fachową pomoc oraz widziałem wiele bilbordów oraz akcentów TAIWANGUN co uważam za super!!
-
- 13.12.2024 napisał:Magazynek został kupiony z przeznaczeniem do repliki pistoletu STACCATO 2011 P (licencja EMG - R611-3). Jest w pełni zgodny z oryginalnym magazynkiem, różni się nieznacznie jedynie stopką - nie ma to wpływu na jego funkcjonalność.
-
- 06.03.2024 napisał:Dobrze wykonany magazynek, jedno nabicie starcza na 2-3 magazynki, Idealny do AA R501, jedyny minus to nigdy nie wiadomo kiedy jest w pełni nabity więc radzę dodać +/- 15s aby upewnić się, że jest w pełni nabity i gotowy do strzelania
-
- 06.03.2024 napisał:Magazynek bardzo fajny, ale troszkę większy od tego stockowego (nie jest to problem, ale warto o tym wspomnieć). Według opisu pasuje idealnie do repliki R-504 i tak rzeczywiście jest. Mój model ładnie trzyma gaz i jestem bardzo zadowolony z zakupu. Na pewno kupię takich jeszcze kilka :)
-
- 12.06.2023 napisał:Magazynek solidnie wykonany, brak jakichkolwiek luzów czy przecieków na zaworach. Pasuje idealnie do mojego boczniaka (R615 Sand Viper). Nie ma do czego się doczepić konstrukcyjnie. W moim przypadku tylko był zbyt mocno nasmarowany. Paczka przeciekła olejem
Polecanko -
- 05.04.2023 napisał:Bardzo dobry magazynek jedno nabicie gazem pozwala na wystrzelenie 2 magów kulek farba schodzi po dłuższym czasie użytkowania ale dzieję się to w większości magazynków do hi capy na plus jeszcze rozmontowywalny górny zawór bardzo dobre magazynki posiadam już 3
-
- 08.03.2023 napisał:Sprawia wrażenie lepiej wykonanego niż dołączony magazynek do repliki, inna stopka niż fabrycznie i wydaje się bardziej szczelny niż dołączony do repliki. Kulki podaje poprawnie w dwóch rzędach. Delikatne szczęki, trzeba na nie uważać
-
- 27.01.2023 napisał:Magazynki bardzo dobrej jakości. Kulki 0.25 podają znakomicie. W R501 lepiej siedzi jak oryginał. Nie ma do czego przyczepić się. Cena oczywiście mogła by być troszkę niższa. CZEKAM NA PROMOCJĘ
POLECAM W 100%
-
- 14.05.2022 napisał:Magazynek dużo lepszej jakości niż załączony do repliki.
Różni się nieco konstrukcją w miejscu szczęk, nie wiem czy to jest nowszy model magazynku czy starszy ale przy tej konstrukcji będzie mniejsze prawdopodobieństwo uszkodzenia szczęk. -
- 30.11.2021 napisał:Magazynek przychodzi dobrze zapokowany z odrobiną oleju wiec dbałość o dobry stan podczas wysyłki jest na plus.
Jako dodatkowy magazynek bardzo dobrze pasuje do repliki R604
Magazynek ma mocą sprężynę
Jest solidnie wykonany
Gorąco polecam!
-
- 19.10.2021 napisał:Jak ktoś kupi broń r501 to od razu polecam dokupić kilka takich magazynków. Dają niezwykłą frajdę z użytkowania. Pasują idealnie, mieszczą dużo amunicji, a zarazem wyglądają bosko. Ja na pewno dokupię jeszcze więcej takich
-
- 27.07.2026 napisał:Excellent spare magazine for the R501. It fits perfectly with no wobble, feeds BBs consistently, and locks the slide back every time the magazine is empty. I've had no gas leaks, and the valves seal well even after multiple refills.
The metal construction feels durable and gives the magazine a realistic weight, making reloads feel great during games. Gas efficiency is also impressive—I can easily get through multiple loads of BBs on a single fill under normal temperatures.
If you own an Army Armament R501, R603, or R604, this is definitely worth picking up. Having an extra magazine makes a huge difference during skirmishes, and this one performs just as well as the original that comes with the pistol. -
- 21.04.2026 napisał:Excelent build, accuracy ootb and overall premium feel for the money. Hop was already set up.
The pistol required a little more lubrication.
Very good gas efficiency of more than 50 bb's. A mag holds about 27 -
- 09.04.2026 napisał:Odpowiedź sklepu:Very good quality. No womble. Wonderful click clacks also good weight like a real steel.
My only problem is does not work with 3 different type of magazine. Neither with the stock mag. Do we have any solution? I can't find the reason. They seem identical but only one mag works so farCould you please contact our techs at [email protected] regarding issues with the magazines? Probably we will be able to help you :) -
- 31.03.2026 napisał:This replica is so unique in its look and because of the T8 parts it also shoots so well!! If you have big hands you might be better of taking the Staccato P. For my a clear recommendation if it suits you!
-
- 16.01.2026 napisał:Very nice look and feel, good kick, agressive stippling which is awesome.
Rmr mount works perfect with vector optics frenzy.
One star removed because it is not lubricated or greased AT ALL, like completely dry. I had to dismount it almost entirely to dare shoot with it.
Trigger is a bit hard even after lubrication. -
- 30.12.2025 napisał:Great stacatto replica for the price you pay. With all the steel parts and performance out of the box this replica is a very user friendly pistol for any one new or veteran in the airsoft world. Very easy slide removal for maintenance and hop adjustment en enough option for optics with the optic ready system already placed on top of the slide. Not gonna run a optic, no worries there's a stock iron rear sight in the package to install. The only minor I find is the slide to frame fitment which has a little wobble in it. Not like the TM but let's say it's better for not jamming so quick when it would have been to tight. At the end, I really recommend this replica to anyone new or familiar in airsoft. Would definitely buy one or a similar one again.
-
- 19.11.2025 napisał:Pretty longer than that comes with staccato but are fitting very well. Well sealed, no misfeeds, consistent. I bought two and one is not coming out without a little help but there's no problem.
Good purchase! -
- 19.11.2025 napisał:Sturdy! Very well made with great a look and feel, consistency and kick. There is no need to change the recoil spring as I saw many reviewers recomend.
The only upgrades I made are a red-dot, a flashlight and a hopup bucking. I should change the inner barrel with a smaller one because the tip in front it come loose from time to time and without it it sticks out by 1 cm.
Good purchase. -
- 22.01.2025 napisał:Odpowiedź sklepu:I decided to wait with my review until I have fully tested out this gun, and now that I have disassembled it a million times and shot over a thousand BBs through it, I have a lot of criticism and some praise to say.
First the good things. The body is super nice, absolutely no wobble anywhere, it has some hefty weight into it, the slide feels chunky, it really feels like a real gun. Very good externals. The T8 upgrades are nice aswell, steel hammer etc., very handy. The pistol has also absolutely no problems working at low tempretures. With red gas at -3°C without warming up the mags, it easily empties the entire mag and cycles perfectly. The stock bucking is shit, but putting in a Flamingo 60° or 70° is easy and cheap, so do that.
Now the slightly bad stuff. The AA mags (recommended here in the description) started leaking gas LIKE CRAZY after a month. Every single one of my 4 did. The valves are barely tightened at all by the factory, and the o-rings are dry as sahara. All of them. There is absolutely no lube on them. You MUST disassemble them and properly lube (I used superlube) and tighten (I kept tightening both valves and the bottom screw until they stopped hissing) these mags. Even if they arrive OK, they will eventually give out and leak gas. EVERY SINGLE ONE OF THEM.
Now the really bad stuff. The stock hop chamber is simply dogshit. It's a split design held by two screws on the bottom, so it has a tendency to curve BBs to the side near the end, and the gun cannot lift heavier BBs than 0.25g, even at max setting.
I bought the TTI hop chamber (which apparently should be compatible with the Staccato and many claim to use it), but it DOES NOT FIT. Even installing it, it's too tight and you gotta force it into its place to even assemble the gun. Once you assemble it, it's no good because the chamber sits too far and it doesn't lift BBs at all with the TTI. Not even .20, not even on max setting, because the chamber simply does not fit. And I cannot move it forwards or backwards, then the gun is impossible to assemble because you cannot insert the frame lock bar into its hole.
Now the question is, do you want to experiment with hop chambers? Do you want to burn your money, trying to figure out which one fits, which one does not?
If you're fine only running 0.25g BBs and don't mind fixing leaky mags and don't expect to use this at longer range, go ahead and buy it. It's okay for that and it looks pretty. It's reliable internally, works well in the cold and it probably won't break.Dear Sir,
issues with the mags can be caused by the type of gas you are using, we are testing the mags before sending it out to clients to make sure they are properly lubed and tightened.
Hop-up chambers are screwed only at the bottom but in this replica design there is no other possibility and the chambers in the staccato series are well fitted, the problem may be caused by the incorrectly bent pressure of the HU rubber, this is a known ailment in Army replicas. As for the TTI chamber, we cannot confirm his information, we have not tested these HU chambers.
In this case, we strongly recommend contacting our techs if you are not satisfied with your replica. We will definitely be able to help you.
-
- 15.01.2025 napisał:Good solid
High cappa for a nice price.
It’s snappy and you can see it
Already has some good upgrades.
The only thing if you want to take it apart for maintenance. Is be careful the the screws are not that great and wil strip easily.
Also Take into consideration that the extra magazine deal wil give you standard mags and not the same upgraded magazine that comes whit it.
They wil work just fine but are a little less efficient gas wise
But it’s a very nice little side
That’s smooth as butter I love it
-
- 13.12.2024 napisał:I have the R604 pistol and another magazine was a must. This is the same as the one which came in the box and works great. I can have 2 full rounds of BB's with 1 gas fill and there is no leakage present.
-
- 12.01.2024 napisał:large capacity of bb about 25 bb and gas in the magazines, they do not suffer much from cooldown, 10-15 degrees Celsius, the base with the state of Texas could be a little better but it is just aesthetics, they go well with the 5xx series and 6xx
-
- 29.05.2023 napisał:I am really impressed with this mag. It feels pretty well built and has held up to me dropping it a few times on the floor without any noticeable damage.
It fits super snugly in my R501, no play whatsoever, which is a huge plus for me. I'm also quite impressed with it's gas capacity. It easily shoots over 100 times on one gas fill. This is super convenient for longer skirmishes.
Now comes the only thing I dislike about it; its base-plate. Don't get me wrong, it looks good, but the fact that it doesn't have a hole in it is quite annoying. But it's no big deal, a drill fixed that pretty easily. What I however dislike is the fact that the base-plate is pretty easily removable which has led to me accidentally removing the base-plate on the field and as a result losing it.
You can however buy a new base-plate, but that's still annoying. I would have liked the base-plate to have a better locking mechanism. -
- 24.03.2023 napisał:Magazine is of good quality. Fits and feeds without any problems on my Army Armament R501. Does not leak and has a good spring in it. Overall it is of very good quality and I recommend to buy it for compatible pistols!
-
- 15.02.2023 napisał:The magazines are made of full steel. Feels like to real one. The sealngs are fine, o-ring doesn’t release gas. I always store them under pressure. Perfectly fit into my pistol. I own three magazines for cqb fight, it’s enough for one game because the capacity.
-
- 07.02.2023 napisał:I have heard that Army Armament magazines are not the best but this seems good to me. Holds the gas nicely and feeds good. I have this in my R601 Combat Master. Fitment is not 100% but the magazine works. Combat Masters own mag is a litte longer or the bottom cap is different.
-
- 19.10.2022 napisał:Pros
-Very stiff metal construction
-No leaking gas
-High capacity magazines
-Great quality
Cons
-Weight
Size (It doesnt fit in some tactical vests)
In general a very good maagzine for the money that you give. -
- 14.08.2022 napisał:I guess Army Armament has really fixed its magazines. These perform well and are cheap. The magazines that I got were leaking but it was because of the rubbers being dried out inside the magazine. I only had to apply some silicon oil on the rubbers to fix the leaking issue and other than that these perform very well.
-
- 03.05.2022 napisał:I had to say that army armament surprised me with those new GBB guns, they are made with great quality, precise and strong. And this is how are magazines also done. They are build with good quality, very strong, not expensive. There is no gas leaking, fits very well, no gaps between gun and magazine. Absolutely recommend.
-
- 20.04.2022 napisał:Magazine are well made, its metal and also valves are tough and strong. After I tested in my pistol I could say that it works as expected. It is green gas so you have to count with that lower degrees gun could not works properly, but this is not the problem of this magazine. Quality of build is very good. Fits great.
-
- 28.03.2022 napisał:Great price for solid performing mags
These are heavy, gas efficient and look great. They also fit my R609 without any issues (looks even better than the one that came with it). Will definitely be picking up more of these -
- 01.02.2022 napisał:Amazing product, it has a durable metal finish and I never had any problem with it.
Dropped it multiple times during games and had no problem with it whatsoever. The feeding lips seemed a little weak but you can buy those separately too in case if they ever break. It really feels like a quality product in the hands. Would recommend, and I will buy more soon. -
- 15.12.2021 napisał:Extremely well priced pistol. Excellent build-quality, very high gas efficiency, great ouf of the box accuracy and one of the snappiest recoil systems i have had the pleasure of using. Highly recommend to anyone!
-
- 09.12.2021 napisał:The magazine is mainly constructed of metal with a plastic slide on the bottom, so it has some weight to it. The build quality is great and it's a solid, sturdy magazine. The valves also seem to have a very good air seal. I have used these a couple times in a game and so far they have worked perfectly with no misfeeds. 5/5
-
-
Zapytaj o produkt
Bezpieczne i świadome użycie
Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.SKU: · EAN: - · [Zestaw] Licencjonowana Replika pistoletu STACCATO 2011 C2 (Upgrade Version) [EMG] + Magazynek na Green Gaz do R501/R603/R604 [Army Armament] ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent 

Osoba odpowiedzialna za wprowadzenie produktu na teren UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
Producent:
REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH
Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail [email protected]
* Ceny z podatkiem VAT, bez kosztów transportu
