[Zestaw] Lekkie rosyjskie łoże do AKS-74U - Black [5KU] + Taktyczna rosyjska nakładka na rurę gazową - Black [5KU] + 3-slotowa szyna Picatinny...

Przy montażu na CYMA.045 trzeba było lekko spiłować od środka żeby weszło na tą dolną blokadę. Łoże po złożeniu posiada luzy aczkolwiek dobrym sposobem na pozbycie się tego jest włożenie w puste przestrzenie o-ringów małych lub naklejenie kilku nakładek antypoślizgowych w wolne przestrzenie

3-slotowa szyna Picattiny pasuje do łoża idealnie, po dokręceniu nie ma luzów. Kolor zgadza się z innymi produktami 5ku (pokrywa, łoże), rogi są wykończone na gładko, co zapobiega uszkodzeniu ręki lub rękawiczek.

Solidna szyna z aluminium do łoża B-11U. Wszystko ok, ale nie rozumiem dziwnego rozwiązania w charakterze dwóch różnych blokad śrub.. Zamiast dać 1 typ kontry, to są 2 różne, z czego jeden jest dziwaczny i niepraktyczny wg. mnie. Patrząc, jakie ruscy mają rozwiązania nawet w takiej prostocie, to ja się nie dziwię, że nie mogą wygrać. :D

Tym razem przyszło bez oznaczeń Zenitco, ale wykonanie nadal 5/5. Spasowanie z repliką CM.045 idealne. Do wycięć pasują gadżety pod M-LOK. :) Szkoda, ze nie ma w ofercie, w innych barwach, np. Zielonym. Nie wiem, co jeszcze napisać, by wbiło te 200 znaków.

5 za wykonanie i dopasowanie w replice CM045, ale zawiodłem się względem poprzedniego zamówienia jednym detalem, tj. brakiem oznaczeń Zenitco, które miałem rok temu na tym B11U, jak i nakładce rury gazowej B19N. Niby nic, ale gryzie, bo kolby teleskopowe do AK od 5KU posiadają. Czemu ich teraz nie ma, nie wiem. Jeśli sklep wymieni na oznaczone egzemplarze, to pewnie trafił mi się błąd fabryczny.

Ta część także pasuje do prawdziwego AKM jest to świetne uzupełnienie, do łoża RiS B30, zero luzów.

Pasuje bez problemu do prawdziwej broni palnej, razem z łożem RiS B30

Brak

Precisely what I was looking for, for an AKS-74U build. A perfect compliment to the lower handguard and gas tube cover, it's easy to build a handguard that will match the exact requirements of each individual user.

Precisely what I was looking for, for an AKS-74U build. Combined with the matching gas tube cover and picatinny rail pieces of appropriate size, it's easy to build a handguard that will match the exact requirements of each individual user.

Jó minőség,

I fit this on my E&L AKS74U. In order to make it fit, I had to sand down both sides of the piece that fits in the receiver of the rifle itself. I also had to insert some foam between the front piece on the replica that clamps down and holds the handguard in place.

Aside from the above fitment issues(I wouldn't even call them issues), the handguard is of great quality aluminium, with a nice smooth finish. I have attached an RK-6 grip from 5KU also which fits great.

Only fits on E&L AKS74U if you file down the sides of the bracket that goes into the receiver and shim the front of the handguard so it firmly sits in place. Unlike other 5KU Zenitco repro furniture, mine did not come with markings (writing). The use of aluminium is nice, keeps it fairly lightweight but it's prone to scratching, which can make it shiny and reflective.

Filing it is a bit of a tedious process, but with a small file and patience you should be fine. Shimming is so easy a child could do it, I literally used blue masking tape that I tore with my fingers. Looks a bit shit but you can just use black tape instead.

In terms of ergonomics, it is fairly intuitive and nice to index your hand around it, and it feels comfortable and smooth even without gloves, despite the bottom pic rail. You can use a ladder-style rail protector if you really don't like it, but I find it unnecessary.

I bought this item a month ago and after a little modification with the back part, it works perfectly fine with my E&L AK. This handguard fits very well in my replica, there isn't any wobble and all the parts are fitting perfectly on it. The material is just as good as you would expect from 5KU, only the best quality aluminium parts made with CNC. They make the best and most life-like parts for AK-s you can use. Overall if you are thinking of buying a railed handguard for yor AKS-74U this is the best choice you can make, it woths every cent.

Sleds made with great precision and excellent materials. Easy to assemble and, once fixed, they remain in their seat perfectly. Excellent price quality. 5ku always quality products. Congratulations to the Shop with quality products at great prices

Great product that fit CYMA 74U with a little modification.

Would not fit as is, due to CYMA Gas Block, so filed it down a little and then it fit no problem.

Needed to be shimmed in the front, so I used some thinly cut beer can to do the job, but a great fit after those two issues.

Ottima qualità costruttiva e piacevolmente colpito per i loghi presenti. Buona la compatibilità con i vari marchi. Nel mio caso Cyma AK74U. Consigliato per chi come nel mio caso vuole ricreare un modello Zenitco.

Solid piece of kit. Fits well especially with 5ku Handguards. Good solid mounting for flashlights and flashlight switches. Gives it a more tactical look with the handguard.

Fits quite shit on the cyma aks74u. Had to chim it with steel wire in the back and tinfoil in the fron but now it's rock solid. Apart from the fittment it's nice and Gucci looking. Don't scratch easily. Light weight.

Great handguard!! Looks fabulous on the ak47u from cyma

Pros
Rail system amazing detainment
Low profile
Great looks
Sturdy
Adapters !! !!!
Zenitco replica!!!!!

Cons
Russian.......
Some play on cyma

Looks amazing and the markings look almost like the real ZenitCo ones. It's extremely light and it adds some space for attachments on your gun. I paired it with a 5KU-225 lower handguard on an Arcturus PP-19. This part is probably the most universal one which you'll buy since it doesn't require any modifications to fit.

Bought for my WE AKS74UN.

It comes with 2 adapters, ones too small and the other is too large, meaning theres 2 solutions.

Solution 1: Shim it, i filled out the compartment where the adapter is supposed to sit, and gave a light filling on the front plate, now it sits just as tight as the stock handguard.

Solution 2: File down the larger adapter, and shim the front plate, i haven't done this, but it might be a better long term solution.

Other than that, its a great handguard, i have a PK-6 on it and it feels great to maneuver around.
It's light, but the only real downside is if you need more rail space, you need to buy dedicated rails.

I bought this with a B-11 handguard, the intention was to attach it to a WE AKS74UN, but i changed this part out with the stock upper handguard, because this would make the whole front wobble, i guess you could shim it to fit, but the backplate on the gas tube will sit loose since there's nothing for it to sit on.

The build quality is really nice, and it sits very tight on a B-11 handguard.

PROS:
Very lightweight.
Well made, high quality perceived.
Fits well on CM045C, very little gaps to fix.

CONS:
On CM045C the part doesn't match with 5KU-272-BK. Need a little work with drill or file to shift the screw-holes and match the component stated above. Once adapted, fits perfectly.
Not really cheap, but the manufacture justify a bit the price.
Needs dedicated side rails

Even if it needs adjustments, I totally recommend the product, nice, sharp and solid.

Very good quality. Its a good combo with Tactical russian AK lower handguard. Works well with my Cyma AK. Great to mount cams and/or recticles.
Pros: Its not plastic, so its durable
Cons: Non that I can say, works as intended