[Zestaw] Replika karabinka Noveske N4 MWS Gen3 GBBr - Tan [EMG] + Magazynek na Green Gaz do Karabinków Double Eagle MWS 35 kulek - Black [DE]

Good cheaper alternative for mws. Works good with DE replicas but rattle a bit in a magwell. Gas output is somewhat Ok, but it won't consistently shoot a second load of bbs on the same gas fill. After around 50bbs performance drops.

Bardzo porządny magazynek, nigdy nie miałem z nim żadnych problemów. Używam do DE Noveske N4, mam 3 sztuki, po roku używania trzech sztuk, tylko raz musiałem w jednym przesmarować uszczelkę, i od tamtego momentu zero issues. Musicie po prostu pamiętać aby przy przechowywaniu zostawić trochę gazu w magazynku. Polecam bardzo serdecznie.

Informacyjnie, przyszła mi wersja z magazynkiem stanag (praktycznie kopia od TM), kolba na przycisk nie na dźwignię. Replika przyjemna i jakoś wykonania na plus, jeszcze nie przetestowana w trudniejszych warunkach, ale póki co to na plus.

Jestem bardzo zadowolony z zakupu.
Wymieniłem na start tylko gumkę + dystanser.
Jeśli zastanawiasz się nad zakupem to niech to będzie dla Ciebie znak, żeby to zrobić.
Strzela bardzo celnie nawet na stockowej lufie. Dysza w zestawie daje jakieś 1.6J na 0.32g.
Wymieniłem już dyszę na GM 3.5 i dodałem do tego FEDA Npas, teraz nie problem między grami przejść z 1.9 J, do limitu CQB w 2 minuty.
Po dwóch miesiącach regularnej gry widać na ruchomych elementach lekkie zużycie, ale jest to standard w systmie MWS i niczym się nie przejmuję. Z magów używam Stanagów DE, PMAGów GM V3, i Lancera CGS. Wszystkie elegancko siedzą i nie ma nimi żadnych problemów. Wystarczy proste czyszczenie i smarowanie repliki po grze, które samo w sobie jest przyjemnością. Nie zastanawiajcie się tylko kupujcie. Let's go!

Wyjątkowo dobra kopia MWS'a, właściwie kropka w kropkę. Z różnic - magazynek jest mniej wydajny ( oczywiście zamienny z MWS czy CGS ), w DE jest więcej elementów stalowych zespołu spustu i wytrzymalsza sprężyna powrotna dyszy ( zgaduję że wynika to z różnic mocy na rynek zachodni a japoński ). Jakość wykonania godna licencji Noveske, nie dam sobie ręki uciąć ale raczej jest to jakaś biedna wersja cerakoty a nie lakier jak w większości budżetowych replik. Spasowanie idealne. Patrząc po ubiegłorocznych recenzjach - zmienili gumkę HU, może nie jest najlepsza ale nie jest tak tragiczna jak na recenzjach. Lufa jest "po sam gwizdek", nie 20cm jak w poprzednich wersjach. Ogólnie warty polecenia, cena mocno dziwi ( i to nawet jakby to był zwykły ar a nie N4 Noveske )

Jak na razie świetny stosunek ceny do jakości. Bardzo solidne i precyzyjne wykonanie. Duża moc w stocku. Jedyne 2 mankamenty w moim egzemplarzu to: słabo nasmarowana komora rygla, większość wnętrza oprócz zespołu spustu praktycznie sucha. Konieczne dokładne smarowanie bebechów na początek. Druga sprawa to słaba sprężyna powrotna rygla. Przydało by się wymienić na mocniejszą bo ta jest wolna i brzęczy trochę przy pracy. Gdyby nie te 2 rzeczy to praktycznie replika idealna w tej cenie. Ważne dla tych co chcą odkręcić flashihidder! Od spodu jest mała szpila imbusowa która trzyma gwint. Nie jest to wspomniane w instrukcji a ciężko ją zauważyć więc ważne żeby odkręcić zanim się przejdzie do rozwiązań siłowych ;)

Jestem zadowolony z zakupu. Ten MWS w wykonaniu Double Eagle oferuje nie tylko doskonałą jakość, ale także świetny stosunek ceny co sprawia, że moim zdaniem jest to idealna opcja dla każdego aby zacząć przygodę z replikami gazowymi i nie tylko. Pierwsze wrażenie, jakie odniosłem po wyjęciu repliki z pudełka, było naprawdę pozytywne. Wykonanie bardzo solidne, brak jakichkolwiek luzów i dobra jakość malowania daje poczucie wysokiej jakości tego co trzymamy w rękach. W trakcie testów użytkowych w temperaturze pokojowej replika trzymała zadeklarowane parametry na chrono przy używaniu zalecanego gazu czyli u mnie około 320fps i 0,9J na kulkach 0.2 przy 21 stopniach. Sam wygląd zewnętrzny repliki jest kwestią gustu i mi osobiście bardzo się podoba i nie możemy pominąć tutaj dbałości o detale jak np. spasowanie elementów, świetnie odwzorowane oznaczenia na korpusie, lufie czy klapce wyrzutnika łusek. Minusem tej repliki jest na pewno gumka hop up, którą dostajemy w standardzie i działa fatalnie - w przypadku mojej repliki poza słabym podkręcaniem powodowała znoszenie kulek w lewą stronę przy każdym strzale. Jest to jednak bardzo łatwa do poprawy usterka i po wymianie na gumkę od Maple Leaf dedykowaną do replik gazowych znacząco podniósł się zasięg oraz kulki przestały skręcać. Decydując się na „MWS’a” musimy również przygotować się na kosztowny zakup magazynków co akurat jest domeną wszystkich replik zasilanych gazowo ale warto o tym wspomnieć – ten dołączony do repliki wydaje się być solidny i nie ma problemów ze szczelnością. Podsumowując, Noveske N4 Double Eagle jest ładną i solidną repliką, która spełniła moje oczekiwania. Z czystym sumieniem mogę polecić każdemu kto chce spróbować z replikami gazowymi bo dają napradę sporo fajdy

Replika Noveske N4 to solidny sprzęt o wysokiej jakości wykonania. Wygoda, lekkość i przystępność cenowa sprawia, że jest to dobra opcja zarówno dla doświadczonych graczy, jak i początkujących.

+jakość wykonania (brak luzów czy niedociągnięć)
+wytrzymały magazynek green gas
+estetyka
+cena
-wymaga nasmarowania zużywających się części wewnętrznych

One the best choices I’ve made was to purchase these mags since they are compatible with multiple GBBR for example my MTR16 and my Noveske.

2 stage valve makes it even better since they’re is no overfilling and much higher volume of gas reservoir than other gbbr mags.

Will be getting more in the days to come, now I have 5 and I am more than happy. To anyone that looks for fully MWS compatible and MWS platform gas mags, this is the No.1 option.

Thanks again to Taiwangun for their expertise and support in keeping these mags in stock for a long time now.

Best mws magazine with great gas efficiency thanks to 2stage valve out of the box. Thanks to Taiwangun's fast delivery, i recieved the package in 3 days to Croatia.
Will buy more for my ghetto blaster

Great magazines! Using them on my salvo rattler Lt with great consistency. No actual on used difference from the TM ones.

Great finish and fit in the magwell.

Recommended as a alternative to the TMs!

I bought extra magazines for my Double Eagle Ghetto Blaster.

Apart from the gas valve leak, which was fixed with some silicone grease, everything is fine. The magazines feed properly and there are no other issues.
The regular price is a bit high, but there are lots of discounts on the site.

Fast shipping and excellent value for an MWS replica. It offers one of the lowest prices on the market without compromising on quality or service. The packaging is carefully done and well protected, ensuring the product arrives without any damage. Highly recommended.

Great gas efficiency and super lightweight, which really improves handling and overall feel. They perform better than DE P-Mags in consistency and reliability.

For the price, they’re a solid choice and definitely worth picking up. Highly recommended for any loadout.

Great gas efficiency and super lightweight, which really improves handling and overall feel. They perform better than DE P-Mags in consistency and reliability.

For the price, they’re a solid choice and definitely worth picking up. Highly recommended for any loadout.

Got this with the Double Eagle Noveske N4 in the same deal. Do check the deals! Fits perfect in MWS GBB compatible replicas and have solid seals. Easy to fill and feels very solid. No leakage, good spring inside, so far as I can see very durable. 35 rounds capability. Gas is about 3,5 x 35 BB fillings. Fill it up and you are ready for some action on the field and have fun.

Reliable 35-round green gas magazine for the Double Eagle MWS. Feeds smoothly, holds gas well, and feels durable. Easy to load and fits perfectly in the rifle. Great spare mag for skirmishes. Simply perfect magazine.

Double eagle stanag is a very good copy of the traditional Tokyo Marui stanags. To my pleasant surprise they work quite well even in colder weather around 5°C. I think it is a very nice alternative to Tokyo Marui, or guns modify.

Great performance out of the box, without the rather hefty price tag of a Marui system. Build quality is decent, the markings are proper, not painted, and the gun feels solid overall. Drawbacks are the stock lubrication, but you can find great maintenance guides. Recommended for newcomers to the field of GBBRs.

It works very well in live situations, it is easy to handle and you can move around very well with it, both in CQB and in milsim games.

A perfect little replica for its quality, a little heavy when assembled but bearable. It is also equipped with very high quality parts inside and is compatible with parts from many other manufacturers. It has a nice shooting pattern with 0.28 0.30g BBs.

Very good replica, price-performance ratio is absolutely good for beginners as well as advanced players

This replica is the best.

Hello

It works very well in live situations, it is easy to handle and you can move around very well with it, both in CQB and in milsim games.

A perfect little replica for its quality, a little heavy when assembled but bearable. It is also equipped with very high quality parts inside and is compatible with parts from many other manufacturers. It has a nice shooting pattern with 0.28 0.30g BBs.

Very good replica, price-performance ratio is absolutely good for beginners as well as advanced players

This is a very good replika, my favourite.

Hello! I really like these metal magazines. Unfortunately, they run out of stock pretty quickly, but as soon as they became available, I quickly bought two of them. I use them with Green gas, with 0.32 BBs. Average FPS: 290-330, Joule: 1.47. This result was produced at a temperature of around 19-22 C°. However, in a warmer environment (27-34 C°) I measured a higher Joule value. Here the average value was around 1.8 Joule. The magazines are reliable, they do not double-feed the ammunition and do not leak gas. I strongly recommend them to everyone! See you soon!

Using it with N4 MWS Gen3, compared to the polymer version it is much heavier, especially if you have 4-6 mag with you, but much more gas efficient and blowback kicks bigger
1 fully field mag 2 * 32 rounds and hard kick back.
I prefer this performance over weight.

Pros:
+Heavy duty
+Excellent gas efficiency
+Powerful kick back
+No feeding issue

Cons:
-Heavier
-Always out of stock you need to be fast to order it when you get the notification mail

Work perfectly in my Double Eagle Noveske , outperform guns modify pmag (less coldown, higher fps and better gas’s efficiency) . After couple games I only can recommend this magazines I don’t see any difference between this and TM one.

A truly beautiful airsoft gun, with excellent paintwork, beautiful durability, lightweight, and well-balanced. The magazines fit perfectly, firm, and precise. No gas leaks. In Italy, it requires an adjustable NPAS to reach its full potential. Recommended.

Feed lips were loose stock, causing double feeds constantly, even releasing all BBs in the mag when pressing lightly on the top BB.

Maybe after wearing in the mag spring would have solved the issue, but I ended up switching out the feed lips for aftermarket ones and they now work fine, but one of them was a bit hard to install. No gas leaks.

The perfect starter GBBR and for those who already have one (or more), the perfect addition.
It handles amazingly well, but it is not perfect OOTB.

Change the hop rubber and nub (~€20 upgrades) and you're golden. The rifle may need an NPAS to achieve field limits, but other than that it's plug-and-play.

In terms of mags: DE stanags are absolutely fine. They sit well, feed well and are basically a 1:1 copy of the famous TM stanags.
TM stanags are fine too but the magwell might need some shimming.
Guns Modify pmags are fine too, but if you use both GM Pmags and TM stanags, the TM stanags will be a tight fit.

BB's: BLS BB's are my go to - I'm glad to see their bb's work flawless. I would recommend 0.30g at minimum.

To conclude: a perfect rifle for any situation, really. It's short enough to be solid in CQB and with a bucking and nub upgrade, it can handle further ranges too.
4/5 because of the hop rubber and nub, otherwise I have no absolutely no complaints.

For YouTube guides: Taiwangun, Jaeger Precision and Explosive Enterprises have in depth videos on maintenance, upgrades and tech.

10/10 would recommend

Solid choice, but I would suggest trying to get your hands on some Guns Modify PMAGs, as their offer a bit better gas efficiency. Bought a set of these STANAG-style magazines as the PMAGs are out of stock everywhere I look. Used them with Double Eagle Noveske N4 and they work good. Was able to shoot around 50 rounds using green gas at around 12-15c outside. Would rate the mags 4.5/5.

They just work and the buil quality is very good fits my guns modify scar very well gas efficiency wise they are a little les than a original mws mag from tm very pleased with these mags need to get a couple more just in case is run out of mags on the field

Good rifle out of the box. Could easily hop .32g BBs and is compatible with my MWS pistol grip and nozzle. It did have some problems with a standard TM magazine, but after a nozzle change it works perfectly. Good build quality, nice finish, and performs well after minor tuning. Overall a great replica for the price!

I recently picked up the Double Eagle Noveske N4, fully licensed by EMG, from Taiwangun.com, and I’ve got to say—this thing is an absolute game-changer! As someone who’s been itching to get into gas blowback rifles (GBBRs) for that realistic kick and feel, this replica caught my eye with its sleek design, Noveske branding, and wallet-friendly price point. After putting it through its paces, I’m beyond impressed with what Double Eagle and Taiwangun have delivered here.

First off, the build quality is phenomenal for the price. The metal upper and lower receivers feel solid in hand, and the deep-engraved Noveske markings are a nice touch of authenticity—on the receiver, handguard, charging handle, even under the dust cover! It’s clear this isn’t some generic knockoff; the EMG licensing shines through. The 10.5" barrel and M-LOK-compatible NSR handguard give it a compact, tactical vibe that’s perfect for CQB games, and the flat-top receiver makes it a breeze to mount optics (I slapped on a red dot, and it looks mean).

Performance-wise, this GBBR runs on the Tokyo Marui MWS system, and it’s as reliable as I’d hoped. The recoil is crisp and satisfying—way more immersive than any AEG I’ve owned. Out of the box, it chronoed around 320 FPS with 0.20g BBs (using green gas), which is spot-on for most fields. The gas efficiency is surprisingly good too; I got through a full mag and then some on a single fill. The ambidextrous controls—like the mag release and bolt catch—are a huge plus for usability, and the adjustable PDW stock feels sturdy despite its compact size.

Shipping from Taiwangun.com was a breeze. It arrived in about a week (I’m in the EU), packaged securely in a foam-lined box with Noveske markings—honestly, unboxing it felt like a treat. Included were the rifle, a 35-round magazine, iron sights (which are actually decent!), and the usual accessories like an unjamming rod. Taiwangun’s pricing was unbeatable —top-notch experience all around.

If I had to nitpick, the stock hop-up rubber could use an upgrade for better range and consistency, but that’s a minor tweak on an otherwise stellar platform. With the MWS compatibility, there’s a ton of aftermarket potential to make this your N4. For anyone eyeing their first GBBR or just wanting a high-quality, licensed replica without breaking the bank, the Double Eagle Noveske N4 from Taiwangun is a no-brainer. I’m already daydreaming about my next skirmish—and maybe winning that contest prize to snag more gear from Taiwangun! 10/10, would recommend.

Amazing gbbr! Sounds and weighs less than my Lonex ebb, but kicks harder. Great addition to my collection and looks beautiful all kitted, thanks TaiwanGun! :-)

My order arrived in superb condition and really well packaged, like... really, really well. Also arrived superfast. Will definately buy more from TaiwanGun in the future.

I bought the noveske n4 and I have to say that it is really excellent, the only thing that arrived was over joule by a little, maybe it was the gas that I used that increased it, in Italy the limit is 1J, my n4 shot at 1.4/1.5J, I repeat that I do not know the cause of this so it could be my fault, however top shipping arrived early, works and packaged well, very satisfied

Absolutely brilliant replica. The MWS copy is quite well made.

No manufacturing defects.

At 8 degrees on red gas it yields 1.3J on 0.32.

After swapping the bucking to the concave type it can easily hop 0.43g with 3 inch groupings on 45m . Simply amazing. Only downside is that mags are not easily accesible. Stay with DE/ Tm stanags.

Very well made new mags, exact TM copy. Two stage valve working and doing its job perfectly, won't let you overfill you mags,which may result in gun spiting gas in first few rounds. Fits DE MWS platform no shimming needed. Work fine even in winter temperatures with proper gas used. sturdy built quality. Will buy more :)

Very nice quality, this gun are the best. Nice material and the color are very beautiful! My first gbb and i’m happy with noveske, very tankefull! The magazine are great too, the oldest mags arn’t not so good

I just wanted a budget gbbr with good part compatibility. I think i find the right one. Honestly, i just need a new bucking and its super fine for the first game. Later ofc you can upgrade with more stuff but after and AEG, the first game with this is amazing.

Excellent replica, fast shipping!
Everything works!

Just one issue, screw that holds the hopup adjustment mechanism (not sure of the name) the screw head was rounded and the mechanism was so tightly screwed in, that I could not move the wheel, after an hour of trying dozen types of bits in the rounded head I manage to lose it just enough to loosen the mechanism to be able to move the hopup! But I guess this issue lays on the manufacturer and not Taiwangun!

4/5 cuz of this issue, would be 5/5 otherwise

Excellent replica. Only downside is the plastic buffer (can easily be upgraded) and the bolt window on the upper is too big making it look like the bolt is not fully closed.

Internals are steel.

All in all a very good mws clone! Its hard not to buy another one, great value!

The overall quality of the product is good but the one I recieved had dirty inner barrel and the hop-up doesn't work well. With some love it will be very good rifle. Magazines are well made and they fit without much wobble however filling them with bbs without the speedloader adaptor (included with the rifle) it is very hard to fill them.

Extremely good price for the quality of the rifle, usual Taiwangun fast services!
Marui based, excellent externals, ok internals, very good shooting and hopping. Just add some details externally and boom, rifle is done!
Kinda expensive mags but thats to be expected from a gbbr rifle thats Marui compatible. Also kinda finicky hop up adjuster.

I hunted an MWS for a long time...
Then this Novesne N4 came and i was like "meh, what could i lose, let's test it..."

When it arrived i was genuinely surprised about the build quality. As a qualified sport shooter both live and airsoft my standards are high: this rifle felt naturally good in my hands. After some equipping this little beast became the worst nightmare on our CQB field. Extremely accurate, 1.5J with WE Green gas, super gas-efficient.
Not to mention ALL Marui MWS parts are good there, so if you want to build a real horror - go ahead!
Also, i ran this one on an official Action Air Multigun competition and swept the floor with the others.
Recommended? Of course!!!!

Best value for money gbb out there right now. Exact copy of mws system and 1:1 compatibility to parts with small differences on magazine port size (bit bigger) and a small gap between bolt and receiver at the bullet port. Great results with green gas and .28 bbs at around 1.1 joules