+48 123626134 [email protected]
Chwilowy brak
Ten produkt jest aktualnie niedostępny
Powiadom o dostępności produktu
  • Formy dostawy

    Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy

  • Dane techniczne

    Aby zobaczyć dane techniczne produktu wchodzącego w zestaw kliknij w nazwę

    EAN 5901698402471
    Waga 3900 g
    Model Repliki Replika Airsoft AUG
    Kolor czarny
    Materiał ABS, aluminium
    Rodzaj magazynka hi-cap
    Rodzaj ognia ciągły, pojedynczy
    Materiał magazynka ABS
    Akumulator w zestawie NIE
    Rodzaj wtyku akumulatora mała Tamiya
    Wersja gearboxa v.3
    Rodzaj łożysk plastikowe ślizgowe
    Średnica łożysk 7 mm
    Okres gwarancji 12 miesięcy
    Blowback nie
    Amunicja .20g, .23g
    Długość mm 780
    Pojemność magazynka kulek 330
    Długość lufy wewnętrznej mm 490
    Energia wylotowa pocisku J 1.07
    Prędkość wylotowa pocisku fps 340 FPS z kulkami 0.20g
    Średnica lufy wewnętrznej mm 6.08
    EAN 5901698497842
    Waga 720 g
    Kolor przeźroczysty
    Materiał polimer
    Rodzaj magazynka mid-cap
    Długość mm 165
    Pojemność magazynka kulek 170
    Pasuje do AUG
    Ilość w opakowaniu szt 4
  • Recenzje

    • - 11.03.2024 napisał:
      Kupione na potrzeby repliki AUG A3 od JG. Podczas wpinania blokują się minimalnie, i wymaga to użycia ciut więcej siły i ustawienia po odpowiednim kątem, ale podają bez zarzutu! Sam wygląd jest przyzwoity - wytłoczony "wafel" zapewnia solidny chwyt i brak poślizgu w dłoni.
      Ocena opinii: 0
    • - 08.06.2025 napisał:
      So the gun was fantastic, but the 1st game i played, the magazine that came with the gun just broke, and i couldn’t play. It was a bit disappointing, because the gun felt so great. I don’t know if I can even get a refund for this part.
      Ocena opinii: 1
    • - 22.03.2024 napisał:
      TWG is my Favorit shop to order
      Ocena opinii: 0
    • - 03.01.2024 napisał:
      These are really nice quality mags. I got tem for my AA R901 and they work great with it. They fit tightly (maybe a bit too tight), there is zero mag whobbling, and they feed perfectly. The spring is pretty strong, you will need to gradually load them over and over again to reach their full capacity. For this reason I recommend numbering them so you can use them evenly. They are transculent so you can easily see how many bbs you have left. They are made out of good quality and thick plastic, so they are pretty sturdy and nice to touch. On a side note you can insert them in a way that they will lock into place but they wont feed (at least on my replica) but you can see this as the top waffle line will be misaligned with the body.
      Ocena opinii: 1
    • - 16.10.2023 napisał:
      This is my first weapon, it is a really good starter for me. The guns build is sturdy, it self is reliable. The battery space is a bit smaller than expectet but still fine. I really enjoy the extra rail space. All in all i think its a good choice for its prise if you like the aug's
      Ocena opinii: 0
    • - 05.04.2023 napisał:
      Looks and feels great nice weight and the rail is all metal and no rattles. Like the one I had when serving.
      Shoots bang on 1J
      Only downside is the front sling swivel comes off too easily. and the outer barrel fell off last night so must have a look as to what caused that.
      Ocena opinii: 1
    • - 05.04.2023 napisał:
      Looks and feels great nice weight and the rail is all metal and no rattles. Like the one I had when serving.
      Shoots bang on 1J
      Only downside is the front sling swivel comes off too easily. and the outer barrel fell off last night so must have a look as to what caused that.
      Ocena opinii: -1
    • - 19.05.2022 napisał:
      Nice magazines, do fit the R906 from AA, only have to push some harder to get them in the replica. After a couple draws this gets better and hold the tight fitment.
      Cheap and good box of mags, do recommend using these.
      Ocena opinii: 0
    • - 06.05.2022 napisał:
      Everything holds thight. No creeks. Sits and feeds perfectly in a JG AUG. The plastic is tough.

      The spring is very hard out of the box and I had to get it moving by filling it up and emptying repeatedly for a long time. Not a bad thing, just to note.

      Visually fits any AUG too. I was afraid the mag body would be of a more vibrant colour, but it looks great regardless of your AUG being black or green.
      Ocena opinii: 1
    • - 18.10.2021 napisał:
      Solid midcaps!

      These are the single best AUG midcaps I ever used.
      They feed awesomely!
      They have a realistic weight, also the polymer isn't cheap, so they won't break the first time you accidentally drop them.
      The translucent nature of them allows you to see how many bbs you have left (or you can put a dummy round sticker into it to make it look even more realistic)

      Pros:
      - excellent feeding
      - translucent
      - realistic weight
      - thick, high-quality polymer

      Cons:
      - on the Army Armament AUG models, they are very hard to remove/insert at first, this either beds down over time or you can file the inside of the magwell down if you are impacient

      Ocena opinii: 5
    Dodaj opinię


Bezpieczne i świadome użycie

Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.
SKU: · EAN: - · [Zestaw] JG0447A AU-4G [J.G.Works] + Magazynek na 170 kulek do AUG (4 szt. w zestawie) ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent
Osoba odpowiedzialna za wprowadzenie produktu na teren UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
Producent:

REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH

Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail [email protected]
* Ceny z podatkiem VAT, bez kosztów transportu