[Zestaw] AT-AK12-PE z trybem 2-strzałowym [Arcturus] + Replika rosyjskiego celownika kolimatorowego typu DK-9 do AK [JJ Airsoft] + Urządzenie wyl...

Świetny kolimator do replik AK, polecam szczególnie do replik na las i do trochę dłuższych, ze względu na jego rozmiar który jest trochę większy i fajnie komponuje się to z całą repliką. Ten kolimator dodaje koszerności do Twojej repliki AK. Duże szkiełko więc dużo widać przez niego. Naprawdę świetny kolimator.

Świetnie wykonany, metalowy tłumik. Dobrze komponujący się z repliką serii AK. Kulki efektywnie podświetlane, dodatkowy efekt 'błysk' ognia z lufy, przy zastosowaniu zwykłych kulek. Obsługa szybka i nie skomplikowana. Po testach w walce, mogę śmiało polecić!

Bardzo ładny, pancerny tłumik z tracerem w środku. Bardzo ale to bardzo potężne lampki led w środku świecą bardzo jasnym światłem które było widać na drzewie w czasie strzelania, i tworzy zabawny i przyjemny dla oka efekt ognia wylotowego. Obecnie założony na moim cm.113b, i osobiście uważam że to wygląda świetnie i działa bardzo dobrze. Osobiście polecam

Wygląda bardzo zacnie, solidnie wykonany, wkręcana w okular osłona z siatki solidna , na replice prezentuje się bardzo dobrze, zakres regulacji duży , punkt świetlny nieco rozmazany, mimo to celuje się bardzo dobrze nawet w słoneczne dni

Bardzo fajny kolimator. Kropka jest dobrze widoczna nie rozmazuje się. Kolimator jest przejrzysty, patrząc przez niego widzimy doskonale obraz przed nami. Jego konstrukcja jest monolityczna. Optyka jest ciężka sprawia wrażenie dobrze wykonanej repliki kolimatora. W moim egzemplażu bateria była w zestawie. Polecam :)

Replika pod względem wykonania super. Czuć że arcturus się postarał w spasowaniu, prawie żaden element nie lata poza kolbą ale to są minimalne luzy które są do zaakceptowania. Replika pracuje wyśmienicie na lipo 11.1v i na kulkach bls 0.32 ma zasięg 60 m celnego ostrzału (nie próbowałem na większych dystansach jak jest z celnością) ale wydaje mi się że do max 70 będzie znośna celność co w replice która wyciągasz z pudełka i jest gotowa do zabawy jest super wynikiem. Myślę że za taką cenę dostajemy jeden z lepszych karabinów ASG a na pewno z serii AK. Jedynym z niewielu mankamentem to że nie każde magazynki pasują do niego i fajnie jak by producent podał listę magów które są kompatybilne z ich replikami. Ja osobiście nie zawiodłem się na nim i myślę że nie zawiodę. Każdemu fanowi ruskiego szpeju polecam go.

Perfect addition for my PP-19-1.This is the second tracer from this manufacturer - I also have the Tactical SF 9x19 SPITFIRE Tracer Flash Hider [5KU]. Since they have an identical core, this gives me double the reliability.

This DK-9 style red dot really performs well in airsoft! It’s easy to mount, stays steady, and gives you a clear view of the target. The lens protector is a handy addition, and the battery lasts longer than you’d expect. If you’ve got an AK replica, it’s definitely worth trying out – a lot of people praise it, and for good reason.

It's sturdy enough, being built out of metal and quite heavy, but:
- dot intensity is quite low. During day time I have to set it to penultimate or even ultimate position;
- dot can't be adjusted too much. For example, horizontally I maxed it out to right, but it's still off by a few meters from target center;
- drains battery really fast. During winter time, a battery lasts 2-3 game days.

Looks great on my Cyma RPK. Installation was a non-issue. Standard 14mm ccw.

No issues at all with charging or anything. It just works.

I have put about 4000 bbs through it as of yet and it illuminates the tracer bbs without issue.

It is very good replica strong and durable material and the handguards are just perfect. Also the opurtunnity to programme yourself a binary fire etc. is also perfect the 2burst mode comes programmed in the beggining so you dont need to have any skills with perun mosfet. And i also like the fast spring change system.

This was a great purchase, it arrived in a very fast manner and was in amazing condition. Even the paint they put on the muzzle break is so high quality I am leaving it on! I am pleased from these guys and would order again. That being said this product is nice enough I will probably be good for a while.

Sturdy build with a included killflash makes this a great addition no matter your loadout.
The dot is clear and helps aiming with no major adjustment needed right out of the box. It flips clock-wise between different brightnesses but can also flip to full brightness from "OFF" instantly if you flip it counter-clockwise. Helpful for those tight situations where you don't want to fidget with the settings.
Beware that it will not fit properly on uneven RIS such as the CYMA AK-mount (FBP0372) due to it being fastened with two screws. Make sure it is even 22mm.

+ looks great
+ Can use a rechargeable AA battery
+ Comes with a kill flash
+ Very sturdy build, with the metal construction

- bit on the heavy side

Note that was a little bit bigger than I expected

Ist great gun out of box. All materials are really solid and stiff.. Perun etu doing great job. Hop up unit is easy to adjust. Rof is really insane and it's is 1,47j out of box and ist constantly from 1,46 to 1,47j. I easy hit targets 30x30 from 50+ meters with 0.28bb. Great job Arcturus

This is my first Ak and im just blown away by the overall build quality of the Arcturus Ak12 PE. This Version comes with an Perun Mosfet which gives you many options like active breaking; Precocking; two round Burst; Binary Trigger; LiPo Warner; adjustable Trigger Sensivity and a diagnostic system just in case something doesnt work properly. The 13:1 gear ratio combined with an 11.1 Lipo provides a pretty high ROF. Dont think twice if you dropped an eye on this Replica as you cant go wrong.

Love the orange "flame" effect. Might even run just that mode, with no tracers at night fights, will see :) I like the simple design the only con is that there is no button for on/off/mode on the outside. But with the standby function that does not seem like a problem.

When I was buying a tracer unit, I tried to go as cheap as possible, but the quality I got really surprised me.

It is a very sturdy design with very solid aluminium outer shell that really feels bombproof when holding it in hand. The outer shell has 2 caps on both ends which can be disassembled. On the one end, the cap has a standard M14x1 left-hand thread that mounts on the gun, with the cap itself having a left-hand thread which prevents it from loosening while mounting it on the gun. On the other end, the cap has a normal right-hand thread. The unit weights 240g as advertised and the external dimensions are Ø44x106mm (diameter x length).

Inside the aluminium shell, the tracer unit itself is held in place by a spring. The dimensions of the actual tracer unit are Ø31,5x50mm (useful information if you want to put it inside your suppressor). For charging, it uses Micro USB port.

Beside Illuminating the BBs (green tracer only), the tracer unit also has a muzzle flash imitation that works really well. The BB illumination and the muzzle flash can be turned on simultaneously or individually (only BB illumination or only muzzle flash). The BBs are illuminated from 2 sides (LEDs are placed on 2 opposite sides of the tube through which the BBs pass) that ensures optimal illumination of the BB. It is rated to 35 rounds per second and the battery lasts up to 30000 rounds. I can not confirm the advertised numbers, but I can confirm that it works on my gun with rate of fire around 25 RPS, and after about 6000 rounds the battery was still running fine. The unit has an LED battery status indicator that will warn you when the capacity is low or empty. Without firing for 5 min, the unit goes in a standby mode, and it automatically turns on when fired.

I used this tracer unit on 2 of my guns without any issue so far. This is an excellent tracer unit, probably a best buy, and I can definitely recommend it.

It is incredible bulky. Make sure you read the dimensions carefully. Also, the button to select the type of effect you want is super small. Turning the tracer on and off is also a but of a challenge because first you have to open it up, and then after pressing the button, the Blink signal showing that it is off is very small. There are better tracers on this site.

I'll give it 5 stars because this is probably the best out of the box AK12 currently on the market, although that doesn't mean it's perfect.
Out of the box the gearbox works perfectly. It is adequately greased, the shimming and the compression are good and the gears make music to my ears while using 11,1V batteries. Perun MOSFET works flawlessly.
You have an option to mechanically adjust the stroke of the trigger but mine was just right out of the box.
It has the best Hop-Up chamber available for an AK that I came across, although adjustment lever needs to be modified if upgrading to Flat-Hop or R-Hop.
The inner barrel is 6,01mm steel precison barrel that is actually 450mm long (not 425mm as advertised). Outter barrel ends with standard M14x1 left-hand thread.
Buttstock is a bit wobbly but that is the case with most AEGs I came across. It's an easy fix so I don't really consider it as a flaw.
Gearbox wiring could be better. The insulation is very soft (silicone) and you have to be EXTREMELY careful not to pinch it while removing or installing the gearbox. Please be VERY careful while doing this.
As with all AKs the battery space is a bit restricted but stick batteries work fine. Batteries that I know will fit:
• Gens Ace 11,1 LiPo – 1350mAh/ 25C/50C
• iPower 11,1V LiPo – 1200mAh/20C
• Matrix High Performance 11,1V LiPo – 1100mAh/25C
• iPower 7,4V LiPo – 1200mAh/20C
• 8Fields 7,4V LiPo - 1300mAh/ 25C/40C
• Intellect iPower 7,4v LiPo – 1000mAh/20C

Magazines that are included are a perfect match, there is no wobble present at all. Magazines that I know will fit:
• D-Day DMAG AK12/AK74 30/130RDS Variable
• CYMA AK74 130RDS
• Arcturus ENHANCED POLYMER VARIABLE MAGAZINE 30/130 BBS FOR AK
• BattleAxe 150RD MID-CAP POLYMER MAGAZINE FOR AK74

Only AK mag that I tried and it didn't fit was from G&G.
BB's that I would recommend are 0,3g with Stock Hop or 0,32g with Flat-Hop or R-Hop
The rifle works very good out of the box and with a minor upgrade such as Flat-Hop or R-Hop it becomes a beast with great precision and range. It is definitely worth the price.

Suggestion to manufacturer:
The Hop-Up chamber can easily be redesigned for adjustment lever to make pressure on the bucking by a linear motion, which is much more ideal than a circular motion as in the present chamber.

https://i.imgur.com/PG1h18c.jpg
https://i.imgur.com/TlyCswm.jpg

I tested the design and it works much better for all types of Hop (Stock Hop, Flat-Hop and R-Hop)
Also, the two screws on the side of the Hop-Up chamber should not be countersunk screws rather flange head screws or screw with washer combination because overtightening the countersunk screws could damage the eyelets on the chamber.

Estupendo! Me vale perfecto para el MP5 A5 de recoil dé Marui, posiblemente lo ponga también en el AKM de gas de Marui cuando consiga un cañó más corto. El trazador funciona muy bien y es el tamaño Justo para un silenciador y si lo sé no escribo ningún comentario de doscientos caracteres