[Zestaw] REPLIKA FN SCAR-L METAL [CYBERGUN] + Magazynek LANCER L5 AWM 300 Blackout na 190 kulek do M4/AR15 [EMG]

Magi fajne ładnie podają struktura magazynka bardzo fajna posiadają oznaczenia oryginalnego naboju to napewno na plus, ale wygląd nabojów nie jest za fajny jak dla mnie może komuś będzie się bardziej podobało pasują bez problemu do repliki REPLIKA DANIEL DEFENSE DDM4 PDW SBR

Replika bardzo dobrze zapakowana. Od razu po otwarciu pudełka rzuca się w oczy instrukcja, która za wiele nam nie powie (całkowity standard) oraz karta z testem repliki i pieczątką TG. Replika bardzo starannie wykonana, bardzo dobrze spasowane wszystkie elementy ze sobą. Na duże uznanie zasługują oryginalne oznaczenia licencjonowane plus oznaczenia CYMY.
Plusy:
1. Perfekcyjne wykonanie, najlepsze jakie spotkałem na rynku DB się umywa, nie ma porównania
2. Oryginalne bicia
3. U mnie całkowicie działający BoltCatch
4. Wtyk T-conect zamiast Tamiya
5. Świetna praca kolby, chodzi gładko bez zacinania
6. Każdy element metalowy jest dopracowany bez żadnych nadlewek czy uszczerbków
7. Elementy plastikowe również są mega dopracowane, bez ostrych krawędzi.
8. GB w standardzie CYMA Platinum z mikro stykiem-robi robotę
9. Dodatkowo do repliki chwyt w zestawie na szynę RIS-dosyć porządny
10. Bardzo ciasne gniazdo magazynków- testowane na prawie wszystkich magazynkach M4, wszystkie siedzą ciasno i nie ma problemu z wymianą, perfekcja.
11. Dużo lepsze odwzorowanie kolorów repliki niż DB
12. Świetna szybkostrzelność repliki, trzyma stałe FPS-y pomimo niedoszczelnionej dyszy
13. Dobrze działająca rączka przeładowania
Minusy:
1. Zwykła komora HopUp
2. Niedoszczelniona dysza układu-przy serii Platinum można było pokusić się już o aluminiową dysze doszczelnioną zamiast ładować zwykłą dyszę plastikową niebieską bez żadnego doszczelnienia.
3. Selektor zmiany rodzaju ognia u mnie niestety chodzi nieregularnie, jeden raz zaskakuje , drugi już nie, nie działa płynnie po obu stronach.
4. W zestawie magazynek HiCAP........
5. brak wycioru w zestawie
6. Lufa standardowa żadna rewelacja.
7. Rozkładanie niestety nie należy do najszybszych.
8. Przewody mogły by być odrobine lepszej jakości.
Replika godna uwagi. Fantastyczny stosunek ceny do jakości. Za takie pieniążki warto kupić.

Szczerze? Moim zdaniem jest to najlepszy budżetowy SCAR-L dostępny na polskim rynku!

Plusy:
-Dobrze działający z obu stron selektor ognia
-Dobrze siedzące w gnieździe magazynki (W ogóle się nie ruszają)
-Mosfet i niskooporowe okablowanie wraz z wtykiem T-Connect / Deans
-Zrobiony z dobrej jakości, wytrzymałych materiałów
-Prawie identyczne oznaczenia jak na palnym odpowiedniku

Minusy:
-Brak działającego bolt-catch'a (Musimy trzymać rączkę przeładowania, aby dostać się do układu Hop-Up; Sama nie zostaje w tyle, a przycisk do zrzutu zamka nie działa i jest tylko dla wyglądu)
-Dosyć nie pasujący do prawdziwej broni kolor górnego, metalowego body jak na licencjonowaną replikę (I tak lepiej niż replikach SCAR'ów od Double Bell)
-Komora Hop-Up nie jest rotacyjna, ale na szczęście na rynku dostępna jest metalowa, tym razem rotacyjna wersja od Begadi

Very mixed feeling.
First impression Great.
After few times use - bb retension plastic in exit hole is wearing very fast.
This issue happend to me first time - where i use, PTS gen1, PTS gen2, Battle Axe, G&G mags and Cyma.

Bought 5 mags, 2 shows malfunction after first training.

Awesome product,solid and good working!Seems compact and not much heavy.Is a good piece and the price is fantastic!Thank you and I buy again!I bought 4 of them for my replica Noveske N4 and works very well,feeding easy 120-150 bbs

Very nice magazines with nice touch with the painting of bullets.. .. it's also transparent, a detail that I love, and you can see the bb's when you are loading the magazine so you can't reach the maximum point and damage the spring inside.
Very light material.. solid construction

Great mid-cap, really. Looks wise at least.

Does give my poor ICS a severe midcap syndrome, so it’ll need some work to ease the spring and allow it to feed properly. On the other hand it fits snugly in the magwell and it looks stellar.

I did hope for proper sculpted dummy bullets, but it’s just a printed insert. But no one seems to notice.

Caricatori fatti bene, esteticamente poco accattivanti, pescano benissimo e si adattano a tutte le mie repliche pescando fino all'ultimo pallino, anche il prezzo è buono, la capienza dei pallini è di circa 190 bb che lo rendono un prodotto eccezionale.

The big plus for these mags is, that they are see through.
When full about 180 BB's fit. You don't see all but, in the front are first 30BB's, on the back side you see to about 70 and on top of mag (if it's not inserted into a replica) you're at about 90,100. Fits both my Cyma and Cyma platinum M4 well.

I wanted to buy the original mag for my lancer l15, but it was out of stock, so I got this one, and I can say I'ts decent, but inferior to the original mag that came with my L15 in almost every way, but this one has a transparent top where you can see the bb's. Not a bad mag, but if you can get the 220 rnd mag with the red top.

Fantastic magazine. also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

Fantastic magazine. Also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

With "RetroArms" Hop-Up Chamber this MAG doesn´t fit on Cyma Noveske. It´s imposible to use it, any bbs can´t up to chamber.
That´s the worst part, cause it´s look badass with the replica.

Amazing replica!

TLDR; The platinum internals make this the no brainer best Out-of-the-box Scar available right now and for the price it’s a crazy good value.

I have Not “field tested” this yet but I’m very pleased with my home tests. Contrary to some reviews I’ve seen and some worries I had before - the externals look and feel excellent to me nothing loose/wobbly or cheap feeling and the weight is very well balanced. I love the amount of battery space too. The internals somehow seem to perform even better than my other cyma Platinum replicas. Also, maybe a pro or con for you but I unboxed this in front of my wife and she said it was “pretty” when she saw it.

This replica is a very good Airsoftgun. Cyma have made a fine product. No wobble or other strange things. Gearbox sounds very good en shoots great and fast. Taiwangun have sold me again a great Airsoftgun and will bring me losts of fun! As always the service from Taiwangun is very good en the delivery super fast, thanks you all!
I say, buy this great Airsoftgun it's fun and the price is superb!!!

I received my replica couple of days ago, very happy with the build quality but i also have the stock issue like the other user in his review stated.
I pulled out my stock for the second time and i've heard something small bounce away on the floor. Weird, i thought then i noticed the stock won't lock into place.
I assume a locking pin of some sort broke off or something. Currently looking for a solution.

This inconvenience aside its a really solid gun and can recommend.

This is a very cool gun! I love the weight, albeit a little heavy, the style and the feel of it. Shoots decent at about 60 feet/20 meters, but the hop curves it a bit too hard to shoot farther or accurately past that range. I haven't replaced any parts yet, but after a few more play sessions with it, I will.

The two main reasons this is 4 stars is the muzzle and the build quality. For Americans, CYBERGUN uses a steel rolled pin to lock the muzzle in place, and if you get an aluminum/steel muzzle, good luck getting it off. I was hoping they'd give us a plastic one to destroy, as I've seen other people have it with their order, but mines came with a metal one. It doesn't look bad, though. Just obviously orange.

Second reason, build quality. The first time I used it, it was a 4 hour play session. I don't play rough, but apparently rough enough that the stock won't lock in place anymore. Not having the knowledge to fix it, I'm gonna have to jerry rig something, but it's alright. I just wasn't expecting it in the first use.

Other than that, no other big complaints. The pistol grip is small. I have a medium (US) sized hand and slightly short fingers, but the trigger goes past the end of my finger in a full grip I'm going to have to buy a new grip, and if you have a hand bigger than small glove size, I'd suggest you think about it as well.

excellent gun perfect and fast delivery excellent price, I advise anyone who has the idea of ​​buying a gun I advise Tawaingun to start airsoft sport they have all the material at very affordable prices.
thank you tawaingun.

100% perfect fit for my EMG noveske N4(with APS gearbox). Had some problems with specna arms mags for my replica but These feed without any problems they look and feel amazing and really complete my Noveske build idea. Definitely works for EMG, APS and Cyma can work for other brands but haven't tested yet.

This is my first polymer m4 mags, they feel amazing!

Solid and firm. No wobble on them. The lancer markings are excellent, and the fake bullets! Oh my, they look freaking awesome :D Really realistic.

My only problem is there is no option to buy black bottom plate ver of the mags!!! But some spray paint can fix that.

They feed great! I've had zero issues with feeding, Loading the is also really easy if you have a speed loader!

Please also read the description of the mags on taiwangun. Midcaps should be treated right :)