[Zestaw] Replika karabinka Noveske 10.5" Gen III Shorty 300BLK - Black [EMG] + Magazynek LANCER L5 AWM 300 Blackout na 190 kulek do M4/AR15 [EMG]

Magi fajne ładnie podają struktura magazynka bardzo fajna posiadają oznaczenia oryginalnego naboju to napewno na plus, ale wygląd nabojów nie jest za fajny jak dla mnie może komuś będzie się bardziej podobało pasują bez problemu do repliki REPLIKA DANIEL DEFENSE DDM4 PDW SBR

Noveske to marka, która od lat kojarzona jest z niezwykłą jakością i precyzją w świecie broni palnej. Dzięki współpracy między producentami CYMA i EMG, możemy cieszyć się repliką modelu Noveske 10.5" Gen III Shorty, która bez wątpienia kontynuuje tę tradycję doskonałości.

Jako miłośnik airsoftu, jestem pod wrażeniem staranności, z jaką wykonano tę replikę. Karabin ten wiernie odzwierciedla oryginalny Noveske Shorty, który zyskał uznanie zarówno wśród elitarnych jednostek Sił Zbrojnych Stanów Zjednoczonych, jak i na polach bitew na całym świecie. Miłym zaskoczeniem jest pełne oznakowanie, nawet piny posiadają logo Noveske!
Zewnętrzna konstrukcja repliki Shorty imponuje swoją autentycznością i dbałością o detale.

Oznaczenia Noveske znajdujące się na komorze zamkowej oraz łożu NSR-9 nadają jej niezwykłego realizmu. Metalowa konstrukcja, w połączeniu z lufą o długości 10,5 cala, sprawiają, że karabin doskonale sprawdza się zarówno w warunkach CQB, jak i na otwartym terenie. W stocku do CQB jest ona wystarczająca na tyle, że nie musimy martwić się o tuning.

Dodatkowo, możliwość montażu akcesoriów dzięki systemowi M-LOCK oraz szyny Picatinny dają użytkownikowi szerokie możliwości dostosowania broni do swoich potrzeb.

Pod maską, karabin Noveske Shorty kryje zaawansowany mechanizm wewnętrzny, który zapewnia imponujące osiągi. Prędkość wylotowa około 360 FPS oraz częstotliwość strzałów na poziomie około 25 RPS to wynik nowej konfiguracji E-EDITION HIGH-SPEED, która wykorzystuje innowacyjne rozwiązania takie jak wzmocniony korpus gearboxa V2 czy tłok z poliwęglanu z pełnymi stalowymi zębami. Dodatkowo, MOSFET wraz z przewodami o niskim oporze i akumulatorem LiPo zapewniają nie tylko wydajność, ale także niezawodność działania.

Podsumowując, replika karabinka Noveske 10.5 Gen III Shorty to doskonały wybór dla wszystkich miłośników airsoftu, którzy cenią sobie wysoką jakość wykonania, precyzję oraz niezawodność działania. Dzięki starannemu odwzorowaniu oryginalnego modelu oraz zaawansowanemu mechanizmowi wewnętrznemu, ta replika z pewnością zadowoli nawet najbardziej wymagających graczy, którzy chcą aby ich replika była gotowa do rozgrywki po wyjęciu z pudełka d

Very mixed feeling.
First impression Great.
After few times use - bb retension plastic in exit hole is wearing very fast.
This issue happend to me first time - where i use, PTS gen1, PTS gen2, Battle Axe, G&G mags and Cyma.

Bought 5 mags, 2 shows malfunction after first training.

Replika świetna taka typu "kup I graj". Nic nie trzeba upgradować znakomita celność i skupienie. ROF na 11,1 powala z nóg. Pięknie złożona praktycznie zero luzów i wygląda też pięknie. Małym minusem jest komora HU która ciężko chodzi ja musiałem użyć śrubokrętu żeby ustawić hopka.

Awesome product,solid and good working!Seems compact and not much heavy.Is a good piece and the price is fantastic!Thank you and I buy again!I bought 4 of them for my replica Noveske N4 and works very well,feeding easy 120-150 bbs

Very nice magazines with nice touch with the painting of bullets.. .. it's also transparent, a detail that I love, and you can see the bb's when you are loading the magazine so you can't reach the maximum point and damage the spring inside.
Very light material.. solid construction

Great mid-cap, really. Looks wise at least.

Does give my poor ICS a severe midcap syndrome, so it’ll need some work to ease the spring and allow it to feed properly. On the other hand it fits snugly in the magwell and it looks stellar.

I did hope for proper sculpted dummy bullets, but it’s just a printed insert. But no one seems to notice.

Caricatori fatti bene, esteticamente poco accattivanti, pescano benissimo e si adattano a tutte le mie repliche pescando fino all'ultimo pallino, anche il prezzo è buono, la capienza dei pallini è di circa 190 bb che lo rendono un prodotto eccezionale.

The big plus for these mags is, that they are see through.
When full about 180 BB's fit. You don't see all but, in the front are first 30BB's, on the back side you see to about 70 and on top of mag (if it's not inserted into a replica) you're at about 90,100. Fits both my Cyma and Cyma platinum M4 well.

I took it straight from the box, adjusted the hopup to get down to 1,2j with ,32 BB's and went to the field.

It worked amazing out of the box, SA S-Mags worked like a charm without any issues and the quality is solid. The black reciever does feel like polymer but its metal, so its most likely the coating that makes it feel like polymer.

I could not feel any wobble and the quick spring system works great. The ring to the buttstock was extremely tight but i managed to loosen it so i could access the quick spring area. The only downside from the release i got was that the stock is a plain crane stock and not as depicted on the promo pictures. That stock seems to be from earlier waves ofthe replica.

The iron sights works good but i put an RDS on it and it worked wonders. For the price and without any upgrades out of the box its by far one of the most accurate airsofts i ever got.

10/10 would buy again!

I wanted to buy the original mag for my lancer l15, but it was out of stock, so I got this one, and I can say I'ts decent, but inferior to the original mag that came with my L15 in almost every way, but this one has a transparent top where you can see the bb's. Not a bad mag, but if you can get the 220 rnd mag with the red top.

Fantastic magazine. also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

Fantastic magazine. Also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

With "RetroArms" Hop-Up Chamber this MAG doesn´t fit on Cyma Noveske. It´s imposible to use it, any bbs can´t up to chamber.
That´s the worst part, cause it´s look badass with the replica.

100% perfect fit for my EMG noveske N4(with APS gearbox). Had some problems with specna arms mags for my replica but These feed without any problems they look and feel amazing and really complete my Noveske build idea. Definitely works for EMG, APS and Cyma can work for other brands but haven't tested yet.

Amazing out of the box ! Really great style !
Very robust, no moving parts, something that is so important for me.
For those who have been feeling like Noveske has been missing a little something, these new cyma ones are insane! Trigger feels so nice it has that sort of "click" when pressing the trigger wich is just out of this world for an AEG.
Very precise, Very consistent with 20g bbs the fps is between 376 and 373.
All in one this gun is top tier for its price and I haven't shot any gun in that price range that shoots that good.

This is my first polymer m4 mags, they feel amazing!

Solid and firm. No wobble on them. The lancer markings are excellent, and the fake bullets! Oh my, they look freaking awesome :D Really realistic.

My only problem is there is no option to buy black bottom plate ver of the mags!!! But some spray paint can fix that.

They feed great! I've had zero issues with feeding, Loading the is also really easy if you have a speed loader!

Please also read the description of the mags on taiwangun. Midcaps should be treated right :)

(I got mine with the re-shimming service, plus extra Lancer mag, for some reason they don't have a black bottom plate ver of the mag. only tan ver... strange)


Minimal and light, great feeling, smooth handguard. The magazines feel very solid.
The metal body has a distinctive feeling, you can tell it's not the most "''high''" quality metal, BUT it feels more than okay, especially when you compare it with something like a double bell.
Every pin, screw is tight on this body, no wiggle room, no nothing.
I was afraid that the barrel would wobble, but it's rock solid, nice job.
Please remember to be careful with unscrewing the grub screw from the 3-prong flash hider, My cyma ak74s grub screw sadly broke in half, I can still mount on the 24ccw but I can't get to the 14ccw... So please, be careful, there was no issue with the noveske n4, but still... Be careful!!!

Iron sights are polymer, that's fine, will replace them with some scalar works replicas.

Im kind of sad that you can't mount something on the 45-degree angle on the M-LOK handguard... But I guess that's for more strength in the hand guard.

The grip you get is noveske markings. A pleasant surprise. But I will replace it with a BCM vfc aeg mod3 grip. More grippy.

The stock is great, I put this battery in it:
https://www.taiwangun.com/lipo-11-1v/battery-li-po-1300mah-11-1v-15-30c-t-connector-8fields

And it sounds great, I'm sure without the re-shimming service it would sound good, but I would highly recommend the re-shimming service. And of course, you can always ask taiwangun anything, and they will reply very fast :)

I sadly haven't shot it outside(only inside), I hope I can edit this review, So I can add more info on this. From what I can tell, it shoots VERY straight, very powerful.

I have ordered a lot of stuff for this rifle, I can't wait for all the stuff to arrive.

I live in Denmark, and taiwangun usually takes only 2-3 days to get here, but since I got the re-shimming service, it took 5 days.

Anyway, I don't think have much more to say, it's amazing, and props to EMG (and Cyma) I look forward to this project. I will prob be doing a video on this rifle. There aren't any reviews that I could find(at least a video review) So I think this is the first :D But yea buy this if you want a noveske n4 aeg :)


AGIAN I wish I could upload photos!!!!! taiwangun make it happen!