+48 123626134 [email protected]
Zmień język na angielski Zmień język na polski Zmień język na francuski Zmień język na hiszpański Zmień język na niemiecki
Press Corner
Zaloguj | Zarejestruj
0 0

[Zestaw] Replika subkarabinka FN SCAR-SC z 25RPS, ESHOOTER ETU [Cybergun] + Magazynek LANCER L5 AWM 300 Blackout na 190 kulek do M4/AR15 [EMG]

W skład zestawu wchodzą następujące produkty:

Chwilowy brak
Ten produkt jest aktualnie niedostępny
Powiadom o dostępności produktu

  • Formy dostawy

    Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy

  • Dane techniczne

    Aby zobaczyć dane techniczne produktu wchodzącego w zestaw kliknij w nazwę

    EAN 5904420018391
    Waga 3280 g
    Model Repliki Replika Airsoft SCAR
    Kolor czarny
    Materiał aluminium, polimer
    Rodzaj magazynka hi-cap
    Rodzaj ognia ciągły, pojedynczy
    Materiał magazynka stal
    Akumulator w zestawie NIE
    Rodzaj wtyku akumulatora T-connector
    Wersja gearboxa v.2
    Rodzaj łożysk stalowe ślizgowe
    Średnica łożysk 8 mm
    Okres gwarancji 12 miesięcy
    Rodzaj gwintu lufy lewoskrętny
    Amunicja .23g, .25g
    Numer seryjny TAK
    Długość mm 535
    Pojemność magazynka kulek 400
    Długość lufy wewnętrznej mm 200
    Energia wylotowa pocisku J 1.14
    Prędkość wylotowa pocisku fps 350 FPS z kulkami 0.20g
    Średnica gwintu lufy mm 14
    Średnica lufy wewnętrznej mm 6.04
    Ilość magazynków w zestawie szt 2
    ETU MOSFET TAK
    EAN 5904420004486
    Waga 220 g
    Kolor czarny
    Materiał polimer
    Rodzaj magazynka mid-cap
    Kamuflaż Tan
    Grupa kolor 10023
    Długość mm 160
    Pojemność magazynka kulek 190
    Pasuje do AR15 / M4 / M16
    Ilość w opakowaniu szt 1

  • Recenzje

    • - 06.01.2026 napisał:
      Replika ASG SCAR SC zachwyca jakością wykonania i spasowaniem. Jest celna, niezawodna i dobrze leży w dłoniach. Świetny wybór do CQB oraz gry w terenie. Sprawdza się w każdej rozgrywce i daje dużą satysfakcję z użytkowania
      Ocena opinii: 0
    • - 04.06.2024 napisał:
      Magi fajne ładnie podają struktura magazynka bardzo fajna posiadają oznaczenia oryginalnego naboju to napewno na plus, ale wygląd nabojów nie jest za fajny jak dla mnie może komuś będzie się bardziej podobało pasują bez problemu do repliki REPLIKA DANIEL DEFENSE DDM4 PDW SBR
      Ocena opinii: 0
    • - 30.08.2023 napisał:
      Very mixed feeling.
      First impression Great.
      After few times use - bb retension plastic in exit hole is wearing very fast.
      This issue happend to me first time - where i use, PTS gen1, PTS gen2, Battle Axe, G&G mags and Cyma.

      Bought 5 mags, 2 shows malfunction after first training.
      Ocena opinii: 0
      Odpowiedź sklepu:
      Please use a little silicone oil and check that the magazine is not rubbing against anything. This may solve the problem.
    • - 21.05.2026 napisał:
      Awesome product,solid and good working!Seems compact and not much heavy.Is a good piece and the price is fantastic!Thank you and I buy again!I bought 4 of them for my replica Noveske N4 and works very well,feeding easy 120-150 bbs
      Ocena opinii: 0
    • - 01.12.2025 napisał:
      Very nice magazines with nice touch with the painting of bullets.. .. it's also transparent, a detail that I love, and you can see the bb's when you are loading the magazine so you can't reach the maximum point and damage the spring inside.
      Very light material.. solid construction
      Ocena opinii: 0
    • - 18.11.2025 napisał:
      Great mid-cap, really. Looks wise at least.

      Does give my poor ICS a severe midcap syndrome, so it’ll need some work to ease the spring and allow it to feed properly. On the other hand it fits snugly in the magwell and it looks stellar.

      I did hope for proper sculpted dummy bullets, but it’s just a printed insert. But no one seems to notice.
      Ocena opinii: 0
    • - 24.07.2025 napisał:
      Light and compact little gun. Programmable mosfet is nice as undoubtedly can set up 3 round burst very easily. Overall a very nice carbine.

      Only downsides I've found is that the battery space is a bit cramped and stops you using the charging handle when a battery is in the gun.
      Ocena opinii: 0
    • - 30.04.2025 napisał:
      First, Thanks for the service Gun.

      I have the FN Scar-Sc for abouth 2 weeks now and love the looks and handeling of it.
      Adjustment of the hop upp is a bit tricky because when the battery is in the slider wil not open upp.
      I took the back end of and let my battery hang out.
      Got a 1000,1100 c20 and 1200 c25 mha battery in it .
      The 1200 while take some patience because its a very tight fit.
      I ordered a Maple Leave 6.2 inner barrel and a hop upp to make it shoots just that more accurate on longer distance's.
      Overal its a very nice weapon for a good price.
      Ocena opinii: 0
    • - 30.04.2025 napisał:
      I have the FN Scar-Sc a few weeks now and jused it in a Skirm last weekend.
      Do like the looks and performance of it
      But one of the first things i noticed was that you cannot aces the hop upp adjustment when the battery is in it.
      If you take the back of and let the battery hang out it opens upp.
      I got 1000 ,1100 and 1200mha battery for it.
      The 1200mha while fit, but takes some patience to get the wires al in.
      It shoots fine but stil ordered a Marple Leave 6,2 barrel and hop upp rubber for it to make it perfect on longer distance's .
      Al in al a good buy at the right place.
      Tanks Taiwan gun for your service.

      Ocena opinii: 0
    • - 18.03.2025 napisał:
      Very good replice fires very straight, even though it is short, perfect for CQB games.
      I am giving 4 stars because:
      - the space for battery is small, the recommended battery in the description (Gens Ace 25C 1200mAh 3S1P 11.1V Airsoft LiPo Battery T-Plug) fits very tighlty and also after installing even installing a smaller battery (1cm shorter) fitting the cables seemed like forcing them, they wouldn't stay in naturally or easily
      - for a short version (SC) compared to SCAR-L (same brand) it is waaay heavier. I would expected it to be ligher

      NOTE to taiwangun team: It would be good, if Cyma/Cybergun, makes spare parts so when people want to convert their SC into L or L into SC to have the right parts
      Ocena opinii: 4
    • - 10.03.2025 napisał:
      Caricatori fatti bene, esteticamente poco accattivanti, pescano benissimo e si adattano a tutte le mie repliche pescando fino all'ultimo pallino, anche il prezzo è buono, la capienza dei pallini è di circa 190 bb che lo rendono un prodotto eccezionale.
      Ocena opinii: 0
    • - 01.09.2024 napisał:
      The big plus for these mags is, that they are see through.
      When full about 180 BB's fit. You don't see all but, in the front are first 30BB's, on the back side you see to about 70 and on top of mag (if it's not inserted into a replica) you're at about 90,100. Fits both my Cyma and Cyma platinum M4 well.
      Ocena opinii: 0
    • - 25.06.2024 napisał:
      I wanted to buy the original mag for my lancer l15, but it was out of stock, so I got this one, and I can say I'ts decent, but inferior to the original mag that came with my L15 in almost every way, but this one has a transparent top where you can see the bb's. Not a bad mag, but if you can get the 220 rnd mag with the red top.
      Ocena opinii: 1
    • - 18.06.2024 napisał:
      Fantastic magazine. also on an aesthetic level, with excellent finishes and really well made fake bullets.
      They also work perfectly with VFC and G&G.
      Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
      super recommended
      Ocena opinii: 0
    • - 18.06.2024 napisał:
      Fantastic magazine. Also on an aesthetic level, with excellent finishes and really well made fake bullets.
      They also work perfectly with VFC and G&G.
      Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
      super recommended
      Ocena opinii: 0
    • - 18.01.2024 napisał:
      With "RetroArms" Hop-Up Chamber this MAG doesn´t fit on Cyma Noveske. It´s imposible to use it, any bbs can´t up to chamber.
      That´s the worst part, cause it´s look badass with the replica.
      Ocena opinii: -1
      Odpowiedź sklepu:
      We're sorry you're dealing with parts incompatibility. Unfortunately, not all parts want to cooperate with each other. We remind you about the possibility of withdrawing from the contract and our service support.
    • - 06.10.2023 napisał:
      100% perfect fit for my EMG noveske N4(with APS gearbox). Had some problems with specna arms mags for my replica but These feed without any problems they look and feel amazing and really complete my Noveske build idea. Definitely works for EMG, APS and Cyma can work for other brands but haven't tested yet.
      Ocena opinii: 0
    • - 23.08.2023 napisał:
      This is my first polymer m4 mags, they feel amazing!

      Solid and firm. No wobble on them. The lancer markings are excellent, and the fake bullets! Oh my, they look freaking awesome :D Really realistic.

      My only problem is there is no option to buy black bottom plate ver of the mags!!! But some spray paint can fix that.

      They feed great! I've had zero issues with feeding, Loading the is also really easy if you have a speed loader!

      Please also read the description of the mags on taiwangun. Midcaps should be treated right :)
      Ocena opinii: 0
    Dodaj opinię


Bezpieczne i świadome użycie

Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.
SKU: · EAN: - · [Zestaw] Replika subkarabinka FN SCAR-SC z 25RPS, ESHOOTER ETU [Cybergun] + Magazynek LANCER L5 AWM 300 Blackout na 190 kulek do M4/AR15 [EMG] ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent

REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH

Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail [email protected]
* Ceny z podatkiem VAT, bez kosztów transportu