[Zestaw] EC-202 replika ciężkiego karabinu szturmowego - Black [E&C] + Luneta Biegowa S4 1.5-6X28 VICTOPTICS [Vector Optics]

Luneta biegowa od Victoptic czyli spółki matki Vector Optics. Idealna do ASG, dobre parametry, w zestawie montaż dwuczęściowy. Możliwość ustawienia lunety pod wadę wzroku, jasna, ostrość na 100m bardzo dobra. Gruby tubus 30mm. Polecam zakupy na TajwanGun.

sprawdziłem dwukrotnie, świetna luneta zarówno do karabinków asg ( SWD 550 fps ) jak i wiatrówek ( Snowpeak 1200 S), polecam, dostrojenie bez problemów, pole widzenia czyste. pozdrawiam Leszek Szczecin

Bardzo dobra luneta. Idealny zakres regulacji 1.5 - 6x daje możliwość starcia na bliskim i średnim dystansie. Idealna optyka do szturmu w lesie i do cqb też się sprawdzi. Świetna i staranna jakość wykonania, czysty i klarowny obraz. Polecam

Wszystko co kupuję w waszym sklepie jest ok.
Dostawa ekspresowa .towar dobrej jakości bardzo dobrze zapakowane, jesteście godni polecenia .
Szczęśliwego Nowego Roku i ogrom kupujących życzy stały klient

Mega wygodna luneta , tak jak do działania w lesie tak i w budynkach , nie zmieniłbym jej za nic , cena i jakość wykonania na świetnym poziomie. Jak to Franek Dolas mówił : "Brać kupować i niczego nie żałować"

Replika fajna, bardzo dobra podstawa pod tuning, typu wywalic wszystko wstawic nowe. Silnik mega slaby ledwo ciagnie stocka. Szkoda tylko ze moja przyjechała z uszkodzeniem wewnetrznym w korpusie gornego body na laczeniu przy kolbie i musze jeszcze poczekac by sie nia pobawic ;c. Oby reklamacja udala sie jak najszybciej :)

Mega fajna luneta w tej cenie podświetlenie krzyża fajna opcja na noc bo na dzień nie jest bardzo potrzebna. Powiększenie jest mega jak na lunetkę biegową. W lunecie jest system dostosowania wady wzroku który działa bo testowałem. jedyny minus lunety tej lunety to stała paralaksa. A takto oceniam lunete takie 5/5

This is my first scope. I was wondering how should I mount it to the weapon at first to be perfectly accurate. First it didn't work but then I got the feeling. One thing that surprised me is the lights in the scope. You can switch to red and green and it is a cool feature. However, it is hard to zoom with it because how stiff to turn the parts. Must be because it is new but I find it weird. At first and I had to figure out how to turn the buttons on the top and on the right side of the scope too but then there was no problem.

I use this LPVO on my airsoft replica, and it’s really solid for that purpose. At 1.5× it’s fast enough for close encounters, while 4–6× gives a nice advantage at medium ranges. The illuminated reticle (red/green) is useful in bright sunlight or shaded areas.
The glass is clear for this price range, the zero holds well, and mounting is simple. Of course, it’s not a high‑end optic and the parallax is fixed, but for airsoft it’s more than enough.
Recommended for anyone who wants an LPVO without spending too much.

It's so nice straight out of the box and it's even better if you order tune-up!!
The lubing and shimming is at pro level
Thanks for it

Very good product for the price. Shoots very accurate but the trigger response is not as snappy as I would. So I improved it whit a high speed motor which made it a lot nicer to shoot.
I received this replica with a little damage ( the front sight was completely broken) but the people of Taiwangun mad a good solution to solve my problem.

Just tested the E&C HK417 and the replica is perfect.
Great build quality and very good performance out of the box.
Got the extra magazines that work very well. They need some brake in because the spring is very stiff when you start using them.
FPS are very constant and the trigger response is great with a 11.1 lipo.

Very solid built full metal shoots fairly accurate out of the box a chronos perfect. Very consistent can reach out to roughly 225ft on a human size target with about 4/5 shots hitting with .32. I also recommend only using .32g bbs at the lightest

External:
The whole replica is really solid, every part fixed together greatly. The looking is very similar to the real one. There are just two parts which is a disapointment: stock and dust cover. These are made of low budget polymer, looks very cheap.

Internal:
Hopup/inner barrel: Basic parts, with some shimming and fine adjustment it can be good for a closer combat, but for sniping every part has to be replaced with tuning parts.

Gearbox:
Standard V2 long gearbox with a little addition on the top externally. This addition is just for the bolt imitation holder, if it would be cut off it is just a standard gearbox.
The gearbox has good quality parts: ball bearings, good gears, full metal sprocket piston with bearing, aluminium piston head, type 0 stainless steel cylinder, brass cylinder head with thick paddig, double o-ring nozzle, spring guide with bearing. The main spring is about M130-140.
The only problem is that nothing is adjusted correctly in the gearbox, so a full tune process is necessary.

Electronics:
Standard V2 switch with external MOSFET, T-deans connector and a standard motor. This motor is a bit weak for DMR setup, for me it was only acceptable with 11,1V, but just barely.

Overall, I gave 4 stars because of the external quality and some of the internal parts quality.

For DMR setup there are a lot of work has to be carried out.

I was looking for 417 replica and the only available were the TM which is super expensive also considering the upgrades and the second alternative was the VFC with nice externals but v2.2 is a pain to work with . So E&C with nice externals and a v2.5 gearbox is the replica to go for DMR as you have shifter volume cylinder and takes mostly v2 parts for upgrades

The only thing missing are the Hk markings

So, simply put, this replica is EPIC!
I recieved it just short of a week ago. Still have to field test it, but I am a tech guy, so it will get some upgrades straight away.
But, to put it onto the table. All this model needs, when buying it, is a shimjob. Other then that, it is brilliant! Feels great, looks awesome and the mags are epic too! Internally, everything is high quality and not loaded with grease. Only there where needed. Airseal on mine, is spot on. I reshimmed the gears, they were very minimally shimmed. And adjusted the motorheight. But, I do this to every new AEG I buy, from whatever brand it is.
I have not range-tested it, so I can't say anything aboub that. And I am upgrading those parts(barrel, bucking +nub) anyway.
BUT, this is defenatly a high-quality product for a very good price!
Ow, also gotta mention, this chaper version DOES have a Deans connector, even though the pictures say it is Tamiya. Another big positive thing!
If you like this, buy it! They also sell 1 with a build in, programmable mosfet!