[Zestaw] CM.108 Spike's Rare Breed Spartan Carbine [EMG] + Magazynek LANCER L5 AWM 300 Blackout na 190 kulek do M4/AR15 [EMG]

Replikę będę oceniał przez pryzmat jej ceny regularnej. Muszę zacząć od minusów bo mimo, że jest ich niewiele to są poważne. Po pierwsze konstrukcja selektorów ognia, lewy, główny selektor przykręcony jest na śrubę wewnętrzną, generuje to mnóstwo problemów w przypadku gdy się zwyczajnie odkręci, ponieważ by zamocować go trzeba wyjąć gearbox z obudowy a nie każdy umie to zrobić nieinwazyjnie. Drugi poważniejszy minus - konstrukcja prowadnicy sprężyny głównej. Rozwiązanie zastosowane w tej replice swoje lata świetności ma już dawno za sobą, a wiele innych producentów z niego zrezygnowało, mianowicie: kolba, prowadnica kolby, śruba mocująca i prowadnica sprężyny trzyma się na wypustce z tyłu body o grubości ścianek 1,5mm. Rewelacyjne spasowanie repliki sprawia co prawda, że konstrukcja radzi sobie z obciążeniami jednak jedna niewinna wywrotka może definitywnie zakończyć żywot repliki. Muszę jednak wspomnieć o plusach bo również są i to bardzo przekonujące. Kolejna generacja gearboxa na bazie konstrukcji 40x, bardzo wytrzymały i podatny na tuningi w połączeniu z mosfetem czyni z repliki istną kosiarkę. Przy zastosowaniu baterii 11.1V naładowanej na 12.4 daje szybkostrzelność 26.5 rpm. Jakość wykonania i spasowania leży na wzorowo wysokim poziomie jak na aluminiowe body przystało. Body to odlew z innego gatunku aluminium a front bardzo precyzyjnie wykonany za pomocą obrabiarki CNC, ogólnie ciężko się do czegoś przyczepić, ewentualnie prowadnica kolby wykonana najprawdopodobniej ze stopu cynku i aluminium nie przeszkadza w użytkowaniu ale należy pamiętać, że to znacznie gorszej jakości stop metali. Podsumowując ciężko jednoznacznie polecić lub nie polecić tę replikę, na pewno polecił bym ją komuś kto się zna i potrafi czasami pobawić się w serwisanta nie uszkadzając sprzętu, natomiast osoba początkująca będzie irytować się gdy w ciągu miesiąca będzie musiała 3 razy odsyłać towar z powodu selektora ognia. Uśredniając, polecił bym replikę dla kogoś kto już w świecie ASG chwilę siedzi, zna zalety i wady replik i w razie w ma gdzieś niedaleko znajomego serwisanta, niemniej jednak replika potrafi dać dużo frajdy, gearbox jest wytrzymały, jakość wykonania na wysokim poziomie a nawet gdyby naprawa była rozległa to serwis Taiwangun pełna profeska.

Karabinek zrobiony jak to przystało na serię Platinum. Wszystko jakościowo i porządnie, nie ma żadnych luzów czy nawetniejszych problemów z dopasowaniem. Części wewnętrzne również trzymają poziom, replika może i nie powala osiągami ale strzela celnie i daleko, i z minimum do wymiany (dystanser, gumka i może nozzle) będzie miała naprawdę porządne osiągi. ROF to jest osobna bajka, już z pudełka w trybie full auto strzela jak A10))
Z minusów zdążyłem odnaleźć tylko rzadką i słabej jakości śrubkę od przyciski zwalniania magazynku (można ją odkręcić tylko bardzo małym kluczem torx w kształcie gwiazdki, chyba T8 i mimo tego że klucz pasuje i tak śrubka jest bardzo miękka i podatna na uszkodzenia.), również przez specyficzną ozdobę gniazda magazynku nie pasuje tu obustronny mechanizm zwalniania magazynku.

Magi fajne ładnie podają struktura magazynka bardzo fajna posiadają oznaczenia oryginalnego naboju to napewno na plus, ale wygląd nabojów nie jest za fajny jak dla mnie może komuś będzie się bardziej podobało pasują bez problemu do repliki REPLIKA DANIEL DEFENSE DDM4 PDW SBR

Very mixed feeling.
First impression Great.
After few times use - bb retension plastic in exit hole is wearing very fast.
This issue happend to me first time - where i use, PTS gen1, PTS gen2, Battle Axe, G&G mags and Cyma.

Bought 5 mags, 2 shows malfunction after first training.

Awesome product,solid and good working!Seems compact and not much heavy.Is a good piece and the price is fantastic!Thank you and I buy again!I bought 4 of them for my replica Noveske N4 and works very well,feeding easy 120-150 bbs

Very nice magazines with nice touch with the painting of bullets.. .. it's also transparent, a detail that I love, and you can see the bb's when you are loading the magazine so you can't reach the maximum point and damage the spring inside.
Very light material.. solid construction

Great mid-cap, really. Looks wise at least.

Does give my poor ICS a severe midcap syndrome, so it’ll need some work to ease the spring and allow it to feed properly. On the other hand it fits snugly in the magwell and it looks stellar.

I did hope for proper sculpted dummy bullets, but it’s just a printed insert. But no one seems to notice.

Unbelievable quality for the price! I absolutely love this gun. I’m running it with a Li-ion Titan 7.4V 3000mAh battery and it performs flawlessly. The CM.108 Rare Breed Spartan model not only looks incredible with its unique design, but also feels solid and reliable in the field—definitely a rare find at this price point.

A Cyma platinum. Great internals, very good ROF (on 7.4V battery comes to 17-18, 1.3J, Standard spring) briefly tested on 11.1V and it came to 28!

I personally prefer 7.4V as performance is already great. Less stress on the motor and internals means this will work for a long time.

The only downside really is the magazine well. Looks great but due to the internal shape, not every magazine for m4 fits. Cyma Platinum mags fit, and also shorter ones (usualy for 150BB). Larger 200BB usualy don't fit at all. So be carefull when buying mags

I’m new to airsoft, but this is sweet! The weight feels right, details are beautiful, firing mechanism seems solid, and paint is great. Honestly if it weren’t for the orange tip (US customer), I wouldn’t be able to tell it was airsoft without physically inspecting it, visually it’s no different. As I said, the weight even feels perfectly matched to the real deal. I would definitely recommend.

Caricatori fatti bene, esteticamente poco accattivanti, pescano benissimo e si adattano a tutte le mie repliche pescando fino all'ultimo pallino, anche il prezzo è buono, la capienza dei pallini è di circa 190 bb che lo rendono un prodotto eccezionale.

Absolutely fantastic gun. Got it on sale, so if the mosfet dies I will install the Perun with house money. Fit and finish is excellent. Even on the 7.4v lipo, this thing is great. This was my first gun, but I got several for my family and I am really pleased with the purchases. CYMA 220rd midcap mags fit really well and have minimal mag-well wiggle. Several friends saw the guns and are getting themselves one.

Even better then expacted.
Really worth its money.
It fires further then i thought.
Placed the Maple leaf bucking and nub and it even got better.
I really recoomend this replica for every one who start air soft.

The big plus for these mags is, that they are see through.
When full about 180 BB's fit. You don't see all but, in the front are first 30BB's, on the back side you see to about 70 and on top of mag (if it's not inserted into a replica) you're at about 90,100. Fits both my Cyma and Cyma platinum M4 well.

I wanted to buy the original mag for my lancer l15, but it was out of stock, so I got this one, and I can say I'ts decent, but inferior to the original mag that came with my L15 in almost every way, but this one has a transparent top where you can see the bb's. Not a bad mag, but if you can get the 220 rnd mag with the red top.

Fantastic magazine. also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

Fantastic magazine. Also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

With "RetroArms" Hop-Up Chamber this MAG doesn´t fit on Cyma Noveske. It´s imposible to use it, any bbs can´t up to chamber.
That´s the worst part, cause it´s look badass with the replica.

This AR looks awesome and it has a very realistic feel to it (it's heavy due to it's metallic body).
It has the same internal setup as an M4 so you can use many parts to upgrade or change your build.
I have used it in several games and it has not let me down so far. Please remember to take care of your gun after the game by cleaning it, unhooking the batterie and emptying the magazine.
Enjoy your games with this exotic, yet fearsome looking gun.

First gun, was originally going to buy the CM.097A, but saw this on discount($199) so couldn't resist.

First impressions are great, high quality aluminum receiver and handguard, Picatinny on top and MLock rails on the sides and bottom of the handguard.

** From what I know of, the internals and the stock are identical to the more popular CM.097, but never owned it so I wouldn't know for sure.

Pros:
- High quality aluminum externals, looks way better IRL than in the pictures
- Cool handguard will draw eyes on the field
- Functional bolt catch
- Decent iron sights
- MLock!!!
- Deans/T-connector!!!
- Comes with a short MLock to Picatinny adapter installed on the bottom(you can see it in the picture), haven't tried to take it off yet but should be relatively easy.
- Famously good internals of the CM.097, with quick change spring system.
- Shipped to the US, orange muzzle break is metal and looks good. Paint scratches off quite easily though

Cons(all very minor):
- Special design of the magwell causes a lot of mags to not fit so well. Both the mag that came with it(CYMA metal Mid-cap) and the ones I bought separately(BattleAxe polymer Mid-cap) had quite a bit of wobble, but they fed well anyhow.
- I'm having trouble taking the orange tip off by hand, but it looks fine with it so I'm not worried.
- Literally nothing else


Haven't taken it to a game yet, but from the plinking I've done in my backyard, I can tell it shoots great. I'm using a Titan 7.4v 3000mah Li-ion.

100% perfect fit for my EMG noveske N4(with APS gearbox). Had some problems with specna arms mags for my replica but These feed without any problems they look and feel amazing and really complete my Noveske build idea. Definitely works for EMG, APS and Cyma can work for other brands but haven't tested yet.

This is my first polymer m4 mags, they feel amazing!

Solid and firm. No wobble on them. The lancer markings are excellent, and the fake bullets! Oh my, they look freaking awesome :D Really realistic.

My only problem is there is no option to buy black bottom plate ver of the mags!!! But some spray paint can fix that.

They feed great! I've had zero issues with feeding, Loading the is also really easy if you have a speed loader!

Please also read the description of the mags on taiwangun. Midcaps should be treated right :)