[Zestaw] CM.097 Upgraded Version [CYMA] + Magazynek LANCER L5 AWM 300 Blackout na 190 kulek do M4/AR15 [EMG]

Magi fajne ładnie podają struktura magazynka bardzo fajna posiadają oznaczenia oryginalnego naboju to napewno na plus, ale wygląd nabojów nie jest za fajny jak dla mnie może komuś będzie się bardziej podobało pasują bez problemu do repliki REPLIKA DANIEL DEFENSE DDM4 PDW SBR

Very mixed feeling.
First impression Great.
After few times use - bb retension plastic in exit hole is wearing very fast.
This issue happend to me first time - where i use, PTS gen1, PTS gen2, Battle Axe, G&G mags and Cyma.

Bought 5 mags, 2 shows malfunction after first training.

Awesome product,solid and good working!Seems compact and not much heavy.Is a good piece and the price is fantastic!Thank you and I buy again!I bought 4 of them for my replica Noveske N4 and works very well,feeding easy 120-150 bbs

Very nice magazines with nice touch with the painting of bullets.. .. it's also transparent, a detail that I love, and you can see the bb's when you are loading the magazine so you can't reach the maximum point and damage the spring inside.
Very light material.. solid construction

Great mid-cap, really. Looks wise at least.

Does give my poor ICS a severe midcap syndrome, so it’ll need some work to ease the spring and allow it to feed properly. On the other hand it fits snugly in the magwell and it looks stellar.

I did hope for proper sculpted dummy bullets, but it’s just a printed insert. But no one seems to notice.

Caricatori fatti bene, esteticamente poco accattivanti, pescano benissimo e si adattano a tutte le mie repliche pescando fino all'ultimo pallino, anche il prezzo è buono, la capienza dei pallini è di circa 190 bb che lo rendono un prodotto eccezionale.

The big plus for these mags is, that they are see through.
When full about 180 BB's fit. You don't see all but, in the front are first 30BB's, on the back side you see to about 70 and on top of mag (if it's not inserted into a replica) you're at about 90,100. Fits both my Cyma and Cyma platinum M4 well.

The CYMA gun is an outstanding airsoft gun that's sure to impress even the most seasoned players. With its exceptional performance, realistic design, it's perfect for those looking for a top-of-the-line airsoft experience. While the price may be steep for some, the value you get from this gun far outweighs the cost.

I highly recommend this airsoft gun to anyone looking to take their gameplay to the next level!

I wanted to buy the original mag for my lancer l15, but it was out of stock, so I got this one, and I can say I'ts decent, but inferior to the original mag that came with my L15 in almost every way, but this one has a transparent top where you can see the bb's. Not a bad mag, but if you can get the 220 rnd mag with the red top.

Fantastic magazine. also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

Fantastic magazine. Also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

I've been using the CYMA CM.097 upgraded version for several games and it has been outstanding. The external build is solid, featuring high-quality aluminum receivers and comfortable polymer grips and stock. Internally, the precision barrel and reliable gearbox ensure consistent performance. I recommend a few affordable upgrades, like the hop-up and nozzle, to really maximize its potential. This airsoft gun offers excellent value for both beginners and advanced players. Highly recommended for its performance and build quality.

With "RetroArms" Hop-Up Chamber this MAG doesn´t fit on Cyma Noveske. It´s imposible to use it, any bbs can´t up to chamber.
That´s the worst part, cause it´s look badass with the replica.

I would like to add more comprehensive review for this replica after more then 2 months of using it, because it really does deserve it. It really performs amazing and after just a few upgrades and tweaks I really cant wish for a better gun to play with.

A bit about the replica from my experience:

Externals:
Everything on this replica seems solid and well made. Both of the recievers are very high quality aluminium and feels great to touch and the finish quality can be even compared to the likes of Magpul. Polymer parts like the grip and stock have really good feel to them as well and everything just falls in place perfectly. Also the stock has large enough space for batteries up to 2500-3000 mAH.

Internals:
Barrel+Hop-up: Barrel is standard better quality brass barrel that shoots straight and really nothing wrong with it as a stock barrel, I did however changed it for better steel quality Maple leaf barrel to improve the accuracy. I would also recommend changing the hop-up bucking and nub as on most of the stock replicas, its 15 eur worth of upgrades but it really makes a huge difference. The metal rotary hop up unit on this replica is very decent and solid, can handle higher weight bbs too.

Gearbox: The amazing gearbox in this replica is really what you paying for and why this is a no-brainer for beginners and advanced players alike. All of the components are on very high level and really dont need almost any upgrades. What I did upgrade was a nozzle for one with o-rings on it, as the stock one doesnt have any. This is upgrade worth of 5 eur and greatly improves air seal and the FPS consistency. Otherwise all components are great and can perform equaly to guns with double of the price.
I have also put an ETU board(Leviathan) into mine just for extra settings, but the standard ETU is fine as well and can easily handle 11.1V batteries with very crisp trigger response, until you eventually upgrade the ETU.

To sum up: If you are a bit advanced player than deffinitely buy those 20 eur(hop-up + nozzle) worth of extra upgrades to make this replica the best performer for the money, you wont regret it!

There is also multiple options of CM.097 and you cant go wrong with either one. Pick the gun/barrel length that suits your gamestyle the most without compromising anything on the performance.

I would like to add more comprehensive review for this replica after more then 2 months of using it, because it really does deserve it. It really performs amazing and after just a few upgrades and tweaks I really cant wish for a better gun to play with.

A bit about the replica from my experience:

Externals:
Everything on this replica seems solid and well made. Both of the recievers are very high quality aluminium and feels great to touch and the finish quality can be even compared to the likes of Magpul. Polymer parts like the grip and stock have really good feel to them as well and everything just falls in place perfectly. Also the stock has large enough space for batteries up to 2500 mAH.

Internals:
Barrel+Hop-up: Barrel is standard better quality brass barrel that shoots straight and really nothing wrong with it as a stock barrel, I did however changed it for better steel quality Maple leaf barrel to improve the accuracy. I would also recommend changing the hop-up bucking and nub as on most of the stock replicas, its 15 eur worth of upgrades but it really makes a huge difference. The metal rotary hop up unit on this replica is very decent and solid, can handle higher weight bbs too.

Gearbox: The amazing gearbox in this replica is really what you paying for and why this is a no-brainer for beginners and advanced players alike. All of the components are on very high level and really dont need almost any upgrades. What I did upgrade was a nozzle for one with o-rings on it, as the stock one doesnt have any. This is upgrade worth of 5 eur and greatly improves air seal and the FPS consistency. Otherwise all components are great and can perform equaly to guns with double of the price.
I have also put an ETU board(Leviathan) into mine just for extra settings, but the standard ETU is fine as well and can easily handle 11.1V batteries with very crisp trigger response and fast semi and even full auto, until you eventually upgrade the ETU.

To sum up: If you are a bit advanced player than deffinitely buy those 20 eur(hop-up + nozzle) worth of extra upgrades to make this replica the best performer for the money, you wont regret it!

There is also multiple options of CM.097 and you cant go wrong with either one. Pick the gun/barrel length that suits your gamestyle the most without compromising anything on the performance.

100% perfect fit for my EMG noveske N4(with APS gearbox). Had some problems with specna arms mags for my replica but These feed without any problems they look and feel amazing and really complete my Noveske build idea. Definitely works for EMG, APS and Cyma can work for other brands but haven't tested yet.

Amazing gun with amazing build quality! The full metal body feels great and has very well done finish, comparable to aftermarket body parts. Internally the gun is extremly well made too. Only change needeed was in the hop-up bucking and the nub (as in every stock gun) and a nozzle with an o-ring(as in every stock gun). Otherwise it shoots amazingly ootb. The trigger response is great and shoots pretty quickly on semi with 11.1V battery. No ETU problems whatsoever so far.

Definitely TOP gun to buy in this or +100 eur price range.

This is my first polymer m4 mags, they feel amazing!

Solid and firm. No wobble on them. The lancer markings are excellent, and the fake bullets! Oh my, they look freaking awesome :D Really realistic.

My only problem is there is no option to buy black bottom plate ver of the mags!!! But some spray paint can fix that.

They feed great! I've had zero issues with feeding, Loading the is also really easy if you have a speed loader!

Please also read the description of the mags on taiwangun. Midcaps should be treated right :)

Overall the gun performs perfectly so far but I did have an issue with the wire on the Deans connector where it came off and I had to re-solder it. The stock is also near impossible to adjust. The Website doesnt list it but It does have a Deans connector. I would recommend a 7.4-volt lipo to avoid burning out the MOSFET.