[Zestaw] AT-AK12U Mosfet Enhanced [Arcturus] + Replika Rosyjskiego Celownika Optycznego 1P87 Do AK/AK12/AKSU [JJ Airsoft]

Kolimator kupiłem kilka miesięcy temu. Po rozegraniu kilku gier i sprawdzeniu go w 'warunkach bojowych' musze stwierdzić, że to jeden z lepszych kolimatorów na rynku do replik AK. Bardzo solidnie wykonany. Jedynie osłonę musiałem wykonać samodzielnie, bo zabezpieczenie jej jest problematyczne z uwagi na sam rozmiar kolimatora. Celowanie bardzo przyjemne, 12-stopniowa regulacja jasności celownika, duże okno naprawdę ułatwia celowanie do przeciwnika. Dodatkowy plus to szybkie odparowywanie. POLECAM

Kolimator idealnie pasuje do replik typu AK-12.Jest dość uproszczony i o to chodzi.Posiada pokrętło,które stopniuje intensywność naświetlania punktu celowania.Replika posiada znacznik celowania tylko w kolorze czerwonym i tak naprawdę jakoś mi to nie przeszkadza.Najlepsze jest zastosowanie zasilania w tym kolimatorze.Jedna zwykła bateria typu "paluszek" AA i replika kolimatora działa .Polecam każdemu kto chce mieć moim zdaniem ciekawy sprzęt,dobrze działający i fajnie wyglądający zwłaszcza na replikach typu AK-12

Celownik zakupiony świeżo po pojawieniu się na stronie, zewnętrznie wykonany bardzo dobrze, oznaczenia bardzo ładnie zrobione i ogólnie z zewnątrz super. Jednak jeśli chodzi o punkt celowniczy to niestety występuje efekt "widmo"nie jest to w sumie problem bo jedynie wystarczy ustawić odpowiednie ustawienie jasności. Co do ustawiania jasności kropki to pokrętło po kilkunastu obrotach zaczęło się blokować. Generalnie celownik działa i spełnia swoją funkcję lecz nie jest wart tej ceny.

Great red dot very expensive but ive managed to build with it an 540€ gear for start and it fell like 4 times in my room and there wasnt even 1 scratch realistic also looks great with an ak12 (ive got an we09) and i love it

Impossible to mount on both LCT and Arcturus rail. Looks like the tail is to thick. The sight leans to the right and isn't angled. However fits like a glove on a ICS M4. Big disappointment since I can't use it on my AK12. Other then that looks like good quality

Ottimo prodotto, simile all'originale, tutto in alluminio. La croce led è molto visibile e soprattutto la possibilità di usare una semplice batteria AAA lo rende economico e flessibile anche direttamente in campo, durante il suo utilizzo

Nice looking red dot , fits great on my Cyma platinum AK . A little bit big , but not so heavy . I was a little bit worried about that .
I liked It also bicause it uses a standard AA battery that you can find almost anywhere. The dot is actually composed of 4 paralel lines which make a nice aiming crosshair . You can also adjust different intensity , so that is nice , but only red color

Things are ok with this red dot.
I have a complete Zenit AKM and this red dot completes it.

The zeroing mechanism works as it should be.
It even holds 7.62x39mm; tested it out on civilian AK.

Thanks for the service!

This sight is an absolute banger it has 12 settings for brightness during the day and 3 mods during the night it looks and feels very realistic. If you are looking for a good sight definetly buy this one

Works well in direct and indirect fire shatters morale of the enemies quite fast. It is high quality. I bought it with 2 extra granades tho it requires maintainance. For the interior use silicone spray as otherwhise it may start to leak.

worked as it should and has a great choosing of light levels.
it was very easy to mount it to my ak-12 and fits nicely.
the only gripe I have is that no retailer makes protection for this sight so you'll have to make your own.

Easily on of the best sights I used. It has a very sleek and robust design and it feels very sturdy. The reticle is a very nice one that is miles better than a simple dot and makes targeting anything a fair bit easier on the eyes. Even the reflections are kept at a minimum and can be used even in rather bright environments with no issues unlike other sights I have.

The 1P87 sight is an absolute standout in terms of durability and apperance. My friend's optic, mounted on a rifle, actually fell straight onto this sight while leaning it against a car and the only result was a small dent on the external housing.
One of the standout features is the night mode (N1, N2, N3). It’s perfect for night games, as it preserves your natural night vision far better than other optics I’ve used. This is actually the first holographic sight I’ve owned that includes this feature, and it makes a big difference during low-light operations.
I hven't noticed major parallax error while using it on field. Quick target acquisition from various angles works flawlessly.
Another huge plus is that it runs on a standard AA battery. That’s a small but practical detail that makes field use easier and more convenient.
All in all, it’s an impressive piece of kit. Now, I just hope that one day JJ Airsoft brings out a 1P78 replica too.
In my opinion, it’s a must-have for anyone building a modern Russian loadout.

The 1P87 sight is an absolute standout in terms of durability and apperance. My friend's optic, mounted on a rifle, actually fell straight onto this sight while leaning it against a car and the only result was a small dent on the external housing.
One of the standout features is the night mode (N1, N2, N3). It’s perfect for night games, as it preserves your natural night vision far better than other optics I’ve used. This is actually the first holographic sight I’ve owned that includes this feature, and it makes a big difference during low-light operations.
I hven't noticed major parallax error while using it on field. Quick target acquisition from various angles works flawlessly.
Another huge plus is that it runs on a standard AA battery. That’s a small but practical detail that makes field use easier and more convenient.
All in all, it’s an impressive piece of kit. Now, I just hope that one day JJ Airsoft brings out a 1P78 replica too.
In my opinion, it’s a must-have for anyone building a modern Russian loadout.

Very well built red dot, it seems it was made in alluminium.
The regulation is easy but you need a tool( which is in the box)
12 levels of intensity for the day
3 levels of intensity for the night
The selector wheel clicks smoothly but it's a bit loose ( nothing to worry about it)
Super easy to mount and dismount.
The only downside is that there is not a suitable protection for the lens so you have to be a little creative with the plexiglass

The 1P87 of holosight is a very beautiful and easy-to-use reproduction, it can be finely and quickly adjusted, and the brightness has many levels (and with nightvision).
Only the inscriptions are thicker than on the sharp version, as well as a figure is missing, otherwise I can only recommend it

It's an amazing optic if you are a Russian forces enthusiast. The reticle is the same as the original one.

It has 12 levels of brightness and 3 levels that are pretty dim for nighttime. And best of all, it uses 1 AA battery, so you don't have to buy a very specific battery for it.

Great sight, allot bigger than I thought it would be. Got it for my LCT akmsu but was waaay to big. Ended up putting it on another rifle.
Build quality is really good, and the dot is very nice.
Would recommend this sight to anyone looking for a Russian style sight.

Upon unboxing, I was pretty pleased with this optic. My only gripe was that there was a second reticle that appeared at the top of the window at higher brightness levels. Unfortunately, my device also ended up having the power knob get stuck. I was able to turn it off, but needed to break out the channel locks to get it done. I hate to have to leave a less than positive review, but that power knob is a real let down.

It's a definitely a great 1p87 replica and the military reticle is fantastic, but I've stumbled upon the same problem as the other person mentioned - the brightness control knob has stuck in one position (in my case it's 6) and couldn't be turned in whichever direction.

I love everything about this optic, except...

it broke on the day i got it. The on-off/brightness dial got stuck and is permanently locked on the NV1 setting. I have tried turning it so hard i got blisters on my fingers.

Haven't seen many reviews or posts about this optic, so i hope there is an easy fix.

I can say its one of best replica out of box. Excellent performance, great quality and also resistant materials. I icked 340 fps version becouse i m usin it for CQB. I had paper with qc from taiwangun with numbers from chrono and comparing to our chrono it was accurate so i can also say they will controll it 100% so you to t need to be scared order from there bur back to rifle: it have +-1J with 0.28 which is around 340fps, accuracy and range are excelent, trigger response is excellent and it have great performace. Lot of people complaining about place for battery. I m usin 7.4V 1200 and have no problems. Battery fits excellent. ME have 4 positions on fire selector… burst position will ahot on full auto and for semi you have to put sellector all the way down like on real ak-12… it fits perfectly in hand, Magazines feeds perfectly, other brands of magazines fits and feeds well too. Replica have no wobble if i don t mind telescopic stock but since its telescopic stock, on this place is little space for mooving allowed

Where do I begin? This replica is more than just amazing. When I bought it, I also purchased the suggested batteries and a charger, as recommended in the product description by the team at Taiwangun. It's important to follow these suggestions if you want to maintain your warranty and keep your replica in good working order! :)

This model (U) features a larger trigger guard and a different stock, both of which I am fond of. The stock on this model is extendable, offering up to 6 different positions.

Inserting the battery taught me that a rubber hammer is quite handy with AKs; it helps in disassembling the necessary parts. Don't hesitate to apply some force when disassembling, but be sure to watch a step-by-step YouTube tutorial first for guidance. Reassembling can be tricky, especially aligning the dust cover and inserting the lever that holds it together. I used a rubber hammer for both removing and reinserting this lever.

Regarding red dots, it's best not to go too high and to be mindful of the height over bore.

This replica DOES HAVE a 14mm ccw thread. Although it's quite short, it still accommodates muzzle attachments. To access the thread, remove a pin from the AK-style brake, twist it, and unscrew.

There's a front loop for a sling and a hole on the stock for a QD sling insert.

Magazine-wise, I opted for the Arcturus AK12 mags (real-mid cap), which fit perfectly. These mags have a small pin at the lip that needs to be pushed out for capacity adjustment. I've heard that non-U versions can use LCT mags, but I haven’t tested them with this replica.

This replica comes with both a mid-real cap magazine and a high cap magazine.

The weight of the replica is noticeable, especially with added armaments.

As a first-time AK replica owner, I couldn't be happier with my purchase.

Now, the biggest question: Should you buy the PE version? If you have the budget, go for it. However, as someone relatively new to this sport, I found this version to be more than satisfactory in every aspect needed.

Remember to be mindful of your local field rules! You can choose from 3 FPS options when purchasing, and this replica has a strong Joule output!

I got this baby. 1.42 Jouls from the box. No need to do anything with it - just unbox and play. Eat well 0.3g balls, works fine with some cyma/LCT mags for AK. !!!NO 2 ROUNDS BURST!!! - safe/burst/single only, switch have position and mark for 2round burst but it act as full auto actually.

As an Ak lover, externally the rifle is solid and sturdy, it feels great to handle. The only thing that wobbles a tiny bit is the stock but it is to be expected on folding stocks, other than that I really like it especially the rubber on the back.

It has a new type of rear iron sight which I really dig, but be aware of the fact that you will need to hammer it in place. Just put something soft between the hammer and the sight so you dont scratch it.

The fire selector is really hard at first but it softens with use. (it doesnt have a 2 round burst like the PE version but honestly i dont need it at all)

The trigger is straighter than traditional Ak triggers and I prefer it. It has a spring release near it which is definitely a plus. It also has a really easy to use spring change system.

The new dust cover is sturdy and doesnt move unlike older types of Aks but it takes a bit more time to disasseble and riassemble. The battery space under it is very tight and I strongly reccomend stick type batteries which fit perfectly.

It has a new rotary hop-up chamber that is WAY better than the old slide hop-up chambers that Ak's have. It's very easy to take a shot and precisely adjust the hop-up as you like.
It's compatible with all of the ak mags I have tried and they all feed the bbs well.
I have only tried it with 7.4V lipos and it has a good trigger response and a slow fire rate around 12bbs a second.
The rifle is fairly precise at 40 meters with 0.25 bbs and 320fps. Certainly not dissappointed.
Overall I really love this rifle and I definitely reccomend it you want a great Ak12 replica.