AT-NY06 Sword SBR LITE Mosfet Enhanced [Arcturus]

Bardzo fajna replika , kupiłem ją na początek swojej przygody, lekka i dobrze wykonana.
Celna na około 40-50m , w przyszłości planuje jakiś tuning jednak replika prosto z pudełka nadaje się na strzelanki.
Zdecydowanie polecam, tym bardziej w promocyjnej cenie.

Jakość wykonania repliki jest dużo lepsza niż się spodziewałem, mega lekka, dobrze leży w ręce bardzo dobre wnętrze jak na stockowy karabin w tej cenie.
Jeżeli chodzi o samą wydajność to replika jest całkiem celna oraz ma całkiem dobra szybkostrzelność

From an exterior standpoint the replica is very sturdy, the front part and the buffer tube is made from metal and the main body is polymer, even though is plastic is very sturdy. The trigger feels nice thanks to the microswitch but is has the trigger travel a bit more than i would like, when you put it in semi the trigger gets blocked mechanically and when you put in in semi you have a bit of tracer before you get to tge switch, it doesn't have the travel adjustment that you have with the FE version that has an etu but with a rubber band can make it feel like a hair trigger almost.

The buffer tube is standard, its good a thing that doesn't say on the website is how to take it out, when you press the latch a tiny pin comes down, with something pointy you need to grab it and pull it down so you can take it of completely, from there is a screw cap to unscrew and then you get to the battery contact, the battery space is a little small in the buffer tube (25c 1100mh battery fits snugly) if you have a slimmer battery it can fit in the stock if not only in the buffer tube, be careful how you chose the battery.

Performance wise is very good the rof is 16 bb/s a little small for my liking but paired with the torque motor in semi auto is very snappy. At my fild is semi auto most of the times so i don't find it a problem.

The mosfet is a very basic one no other functions is there just to make you contacts last longer. You camd upgrade it with and etu because of the gearbox shell is custom to fit the micro switch if toy need a new etu/mosfet only a inline one (like perun ab++) that fits in the buffer tube.

Internals are amazing great compression and sturdy materials so it can be upgraded power wise no problem.

It happened only once but still happened, in semi it double shot, on normal gameplay it didn't do it only in spawn where I tested a a bit.

An other thing is that my bbs curve a little to the left it might be a problem with my replica maybe an over screwed barrel or hop up, i need to test it more to find out, but besides this problems i love it.
I would recoamd a lipo alarm just so you don't damage the battery
The magazine is very good feeds with no problem, its a little lose for my liking but it won't fall out or something.
For beginners i recommend to prepare you mid caps when they are brand new, i mean to put 30bbs and then take it out then 60 then 90 and so on so the spring is prepared only need to make it once, my process took very little time because the spring was very smooth.

Hop up is very precise and has a working blot catch for easy adjustment.

When switching form safe to semi is not that smooth because of the mecanic blocking of the trigger but between semi and full auto is snaps in place.

Mine shot 370 out of the box not 360 how it said on the site and gets 1.2 - 1.3 joules with 0.25g bls bbs.

Besides the problems I mentioned the replica is very good the fact that bbs curve a little to the left is must be just mine because i didn't see people say anything about this i might try to repare it a little, if toy buy this replica i don't think that you will have this problem.

Exterior:

I bought an Arcturus AT-NY06 Sword SBR LITE Mosfet Enchanced gun recently and I would like to give my opinion about it. The body of the gun itself is plastic which is very durable and it’s not noisy like the cheaper plastic guns. It also has a few metal components which fit very good to the plastic. Every button, lever and every other piece works perfectly (I have a Specna Arms M4 on which one of the buttons don’t work as it should. I was afraid that it will be the same with this gun, but luckily it’s works.) The battery placement in the weapon's stock is a bit tight like on other weapons with this placement! A bigger sized battery can’t fit in there for example. I’d recommend longer and narrower batteries for the gun so that it fits perfectly into the stock. You can easily open the stock with a smart mechanism that beats every other brand.

Game experiences:

Now onto its performance in games. The size of the gun is perfect for both styles of games. For CQB it’s not too big, you can easily maneuver in narrow corridors. It’s also great for MILSIM games because it’s not that short that it would influence the bb's route towards the target. I chronoed it with 0.20 bbs and the results were more than satisfying. The fps was around 350-365 with the 0.20 bbs. I also chronoed it with 0.28 bbs with which I easily shot the torso area from around 45-50 meters. Of course if someone is not satisfied with the power of the weapon they can easily change the spring thanks to the quick change spring mechanism, although I think the default is spring is perfect. There’s a very fast gearbox in the weapon which I was skeptical about when I read the description of the gun. I wasn’t sure that it would really make a big difference, but after trying it everyone in my friend group was surprised by how fast it is! The trigger feels very good, it’s very snappy. I use a 11.1 volt battery and it works perfectly with the gun, it doesn’t overheat thanks to mosfet.

Negatives:

I can’t really find negative things about the gun. If I have to be nitpicky I’d only have about two minor things. First of all the gearbox is quite loud, louder than my Cyma M14 and Specna Arms M4 which isn’t a problem at all, I just noticed it. The other thing is the magazine, it’s pretty loose when inserted into the gun. There were multiple instances where it would fall out of the gun after a bit of running, so you have to insert the magazine pretty firmly so that it doesn’t fall out.

Overall I think this gun is a very good choice, I think everyone would be satisfied with its performance. The price is very reasonable and good for how durable and how well it’s put together. I wish everyone good games

Exterior:

I bought an Arcturus AT-NY06 Sword SBR LITE Mosfet Enchanced gun recently and I would like to give my opinion about it. The body of the gun itself is plastic which is very durable and it’s not noisy like the cheaper plastic guns. It also has a few metal components which fit very good to the plastic. Every button, lever and every other piece works perfectly (I have a Specna Arms M4 on which one of the buttons don’t work as it should. I was afraid that it will be the same with this gun, but luckily it’s works.) The battery placement in the weapon's stock is a bit tight like on other weapons with this placement! A bigger sized battery can’t fit in there for example. I’d recommend longer and narrower batteries for the gun so that it fits perfectly into the stock. You can easily open the stock with a smart mechanism that beats every other brand.

Game experiences:

Now onto its performance in games. The size of the gun is perfect for both styles of games. For CQB it’s not too big, you can easily maneuver in narrow corridors. It’s also great for MILSIM games because it’s not that short that it would influence the bb's route towards the target. I chronoed it with 0.20 bbs and the results were more than satisfying. The fps was around 350-365 with the 0.20 bbs. I also chronoed it with 0.28 bbs with which I easily shot the torso area from around 45-50 meters. Of course if someone is not satisfied with the power of the weapon they can easily change the spring thanks to the quick change spring mechanism, although I think the default is spring is perfect. There’s a very fast gearbox in the weapon which I was skeptical about when I read the description of the gun. I wasn’t sure that it would really make a big difference, but after trying it everyone in my friend group was surprised by how fast it is! The trigger feels very good, it’s very snappy. I use a 11.1 volt battery and it works perfectly with the gun, it doesn’t overheat thanks to mosfet.

Negatives:

I can’t really find negative things about the gun. If I have to be nitpicky I’d only have about two minor things. First of all the gearbox is quite loud, louder than my Cyma M14 and Specna Arms M4 which isn’t a problem at all, I just noticed it. The other thing is the magazine, it’s pretty loose when inserted into the gun. There were multiple instances where it would fall out of the gun after a bit of running, so you have to insert the magazine pretty firmly so that it doesn’t fall out.

Overall I think this gun is a very good choice, I think everyone would be satisfied with its performance. The price is very reasonable and good for how durable and how well it’s put together. I wish everyone good games

This thing is so accurate! Absolutely love it! Build quality is descent, trigger response time is very good, mag is good, overall very happy with it. Haven't done full range test yet, but with 0.25 I can hit A4 at 40m. Somewhere in the rail is bit of wobble and mag wobbles too. 1100mAh 11.1 LiPo fits perfectly inside. Overall, it's easily 5 out of 5. Recommend it to everyone.

this is my first assault rifle that i bought and i am very impressed what you get for not even 200 euro.
straight out of the box i could compete with every other airsofter with any gun.
the build qualty is also very impressive nice a light but still feels strong would recommend this gun to everyone