+48 123626134 [email protected]
Dostępny
Nasza cena*: $433.62

Wybierz prędkość wylotową FPS:

Standard

440

Medium

380

+$1.00
Low

340

+$1.00
  • Formy dostawy

    Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy

  • Dane techniczne

    Aby zobaczyć dane techniczne produktu wchodzącego w zestaw kliknij w nazwę

    EAN 5904420009603
    Waga 3320 g
    Model Repliki Replika Airsoft SVD / SVU
    Kolor czarny
    Materiał aluminium, drewno, stal
    Rodzaj magazynka hi-cap
    Rodzaj ognia pojedynczy
    Materiał magazynka stal
    Akumulator w zestawie NIE
    Rodzaj wtyku akumulatora T-connector
    Wersja gearboxa dedykowany
    Rodzaj łożysk stalowe kulowe
    Średnica łożysk 8 mm
    Okres gwarancji 12 miesięcy
    Hop up Regulowany
    Amunicja .28g, .30g, .32g
    Numer seryjny TAK
    Długość mm 1220
    Pojemność magazynka kulek 300
    Długość lufy wewnętrznej mm 590
    Energia wylotowa pocisku J 1.8
    Prędkość wylotowa pocisku fps 440 FPS z kulkami 0.20g
    Średnica lufy wewnętrznej mm 6.03
    Ilość magazynków w zestawie szt 1
    EAN 6976386120257
    Waga 335 g
    Kolor czarny
    Materiał aluminium
    Optyka szklana
    Przybliżenie płynne 1-4
    Długość mm 234
    Średnica zewnętrzna tubusu mm 25
    Średnica soczewki wejścia mm 20
    Średnica soczewki wyjścia mm 35
  • Recenzje

    • - 14.01.2026 napisał:
      Karabinek ładny dobrze wykonany , aczkolwiek mam zastrzeżenia do kolby, kiepsko wykonana jakieś ubytki , nieładnie polakierowana, dla mnie niedopracowana , może dostałem gorszą sztukę , karabinek strzela fajnie , ale strzelanie serią w karabinku wyborowym to obciach i nieporozumienie,, tu kitajca poniosła fantazja ! ale polecam .
      Ocena opinii: 0
    • - 26.04.2024 napisał:
      Replika SWD z body od kałacha z przełącznikiem na ogień ciągły!!! Wystarczyło kołek ogranicznika zamontować nie co wyżej i byłoby jak w oryginale. No i ta plastikowa muszka z urządzeniem wylotowym - to porażka. Magazynek również od razu do wymiany. Jak to strzela? W miarę poprawnie, ale wjedzie lufa precyzyjna i gumka. A po gwarancji pogrzebiemy więcej.
      Ocena opinii: 3
    • - 26.04.2024 napisał:
      Replika SWD z body od kałacha z przełącznikiem na ogień ciągły. Wystarczyło kołek ogranicznika zamontować nie co wyżej i byłoby jak w oryginale. No i ta plastikowa muszka z urządzeniem wylotowym - to porażka. Magazynek również od razu do wymiany. Jak to strzela?
      Ocena opinii: -1
    • - 03.08.2026 napisał:
      I am very happy with it. It has a accurate reticle (as fare as I can tell) and it feels solid. It does have a (bigger/further back) eye relief than what im used to.

      In conclusion, im very happy with my perches
      Ocena opinii: 0
    • - 22.03.2026 napisał:
      Sziasztok az a&k dragunov jó dmr platformnak bizonyult számomra. Van néhány kisebb probléma is mint például a 0.28as az lehet túl könnyű és mondjuk egy 0.30-0.36 os sokkal jobb jobb lő táv érdekében.Az alap hop up gumi ami benne van lehetséges hogy korán megadja magát ezt ajánlom cserélni a hop up elnyomó gumival együtt, az elő agyat tartó kis fém pöcök ami tartja a akkumulátor tartó fedelet lehet ha nem nyomjuk vissza erősen az ki eshet.Ezek ellenére én meg vagyok elégedve nagyon a fegyverrel kezdő dmr platformnak kiváló merem ajánlani kezdőnek haladónak.
      Ocena opinii: 1
    • - 02.03.2026 napisał:
      Jeg har lige købt en dragunov sniper m. Kikkertsigte.
      Kvaliteten af dragunoven er ikke rigtig god.
      Det minder om en billig udgave af de andre dragunov, som man kan købe andre steder.
      Jeg har købt et stort glas montre, til at udstille den i.
      Det kommer ikke til at ske, da dragunoven ikke er særlig godt lavet.
      Kikkertsigtet jeg købte til dragunoven er virkelig god og i en meget fin udgave.
      Men det er så ærgerligt med kvaliteten på dragunoven.
      Mvh Henry Olsen.

      Ocena opinii: 0
      Odpowiedź sklepu:
      Vi beklager meget, at den kopi, du købte, ikke levede op til dine forventninger. Vi vil meget gerne høre, hvad du specifikt ikke kunne lide. Hvis du kunne sende en e-mail til mturecki [at] taiwangun.com, kan vi videresende dine kommentarer til producenten.

      Husk desuden, at du kan returnere et produkt, der ikke lever op til dine forventninger. Du kan finde alle nødvendige oplysninger her, desværre på engelsk: https://www.taiwangun.com/withdrawal-from-the-agreement.html
    • - 18.04.2025 napisał:
      Out of the box- replica would not feed, scope mount was too thick and I had to file it down so it could fit the PSO scope. Wobly wooden stock.

      Changed barrel and hop up rubber- missfeeds and 2 BB shot at once, but still managed to get some shots out.

      Stock broke- turns out screws tore thru the edge of the stock and that is why it could not be tightened down and in the end stock just fell off.
      I think I will not be buying A&K replicas with wooden parts...

      Replica all in all looks cool, however, the wood parts fell "hollow" and weak, and performance was plain bad, but that could be fixed with some cheap upgrades.

      I'll just glue it back and keep it as a wall decoration, nothing else.
      Ocena opinii: 0
      Odpowiedź sklepu:
      We just want to answer the first sentence. If your replica doesn't work properly out of the box, the first thing you should do is contact the seller to make it work. And that should be done in the first place. Giving us a chance to repair you could possibly avoid all the next steps that we are simply not responsible for.
    • - 11.12.2024 napisał:
      The scope is very solid and durable, the reticle is clear. I found the zeroing easy and you can actually zero it unlike other scopes that cant reach the target. i advise to check if it is compatible with your replica of choice sice there are different mounts. I mounted mine on a LCT VSS and it attaches very sturdely after tuning the lever.
      One issue i have is that the scope is not centered with the replica but slightly left and makes aiming a litte akward but that is with pretty much all soviet scopes on airsoft replicas.
      Ocena opinii: -1
    • - 10.06.2024 napisał:
      Seems to work well so far! It feels really sturdy. I use it on my acevd gbbr, and so far I havent noticed any shift of zero from the recoil either. The recticle is offset to the right just like on the original. The light doesnt light up your face but lights up the recticle good.

      I cant find any downsides. Its a great Pso-1!
      Ocena opinii: 0
    • - 23.05.2024 napisał:
      A beautiful gun, at a very good price, unfortunately the metal parts are a significant alloy cast and aluminum, apart from that you can only find steel.
      The workmanship is good, the components of the gas return casting are cast together, with other manufacturers these move separately, although their function is not there either.
      The gun itself is a clone of the old King Arms, it has a motor at the back, a quality cast gearbox, with quality parts, and a finely adjustable rotary hop-up chamber.
      The wood parts are visual porn!
      Ocena opinii: 2
    • - 15.03.2024 napisał:
      Very impressive and beautiful gun. I wouldn't say that it is the very most high quality version of this rifle available, but it is a great gun for this price. Battery compartment is a little hard to access, but not too difficult. Very high FPS. Absolutely fantastic as a collector's item and very realistic looking.
      Ocena opinii: 4
    • - 19.01.2024 napisał:
      I bought this PSO-1 replica after experiencing trouble with another one (other brand and make) with my SVD from Cyma. When unboxing it became appearant quickly that the higher price does get reflected in what you are getting. This optic fits very well on my SVD. Also there is a clear difference in quality when you look through the optic. When you look through this optic it immediately becomes clear that this is the higher-quality optic. The view you get is crystal clear and the reticle is very well defined. The two options for reticle illumination are a very nice extra touch. This scope is also much easier adjust when it comes to the clamps down there. Instead of having to lift up a strong spring with the cheap model, you can change the height of the bottom clamp much easier and accurately with hex key found inside the box. Don't cheap out on PSO-1 optics as the cheap ones always have issues. Don't make the mistake I made and instead directly go for a more expensive but higher-quality one.
      Ocena opinii: 2
    Dodaj opinię
  • Zapytaj o produkt

    Administratorem Państwa danych osobowych jest \Krakman P.Kiepura, K.Michalik Sp. k. a z siedzibą w Krakowie, ul. Półłanki 18, 30-740 Kraków, NIP: 6793082897, REGON: 122593008. Dane osobowe przetwarzane będą wyłącznie w celu nawiązania z Państwem kontaktu oraz w prawnie usprawiedliwionych celach administratora danych. Podanie Państwa danych osobowych przez jest dobrowolne ale też niezbędne do nawiązania z Państwem kontaktu. Szczegółowe informacje na temat przetwarzania Państwa danych osobowych możecie Państwo znaleźć w naszej Polityce prywatności na temat zasad przetwarzania danych osobowych. Pola oznaczone (*) są wymagane


Bezpieczne i świadome użycie

Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.
SKU: · EAN: - · [Zestaw] Replika elektryczna karabinu wyborowego SWD - Real Wood [A&K] + Luneta Vector Optics SVD 4X24 FFP [Vector Optics] ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent
Osoba odpowiedzialna za wprowadzenie produktu na teren UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
Producent:

REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH

Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail [email protected]
* Ceny z podatkiem VAT, bez kosztów transportu