+48 123626134 [email protected]
Zmień język na angielski Zmień język na polski Zmień język na francuski Zmień język na hiszpański Zmień język na niemiecki
Press Corner
Zaloguj | Zarejestruj
0 0

[Zestaw] CM.057S [CYMA] + Magazynek midcap na 100 kulek do serii SVD/SVU AEG [CYMA]

W skład zestawu wchodzą następujące produkty:

Chwilowy brak
Ten produkt jest aktualnie niedostępny
Powiadom o dostępności produktu

  • Formy dostawy

    Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy

  • Dane techniczne

    Aby zobaczyć dane techniczne produktu wchodzącego w zestaw kliknij w nazwę

    EAN 5901698403430
    Waga 3715 g
    Model Repliki Replika Airsoft SVD / SVU
    Kolor czarny
    Materiał ABS, aluminium, stal
    Rodzaj magazynka hi-cap
    Rodzaj ognia pojedynczy
    Materiał magazynka stal
    Akumulator w zestawie TAK
    Wersja akumulatora stick
    Rodzaj akumulatora NiMH
    Rodzaj wtyku akumulatora mała Tamiya
    Rodzaj ogniw akumulatora mini
    Wersja gearboxa dedykowany
    Rodzaj łożysk stalowe ślizgowe
    Średnica łożysk 7 mm
    Okres gwarancji 12 miesięcy
    Blowback nie
    Amunicja .23g, .25g
    Numer seryjny TAK
    Długość mm 1095
    Pojemność magazynka kulek 100
    Napięcie akumulatora V 8.4V
    Pojemność akumulatora mAh 1200
    Długość lufy wewnętrznej mm 590
    Energia wylotowa pocisku J 1.34
    Prędkość wylotowa pocisku fps 380 FPS z kulkami 0.20g
    Średnica lufy wewnętrznej mm 6.03
    EAN 5901698405212
    Waga 200 g
    Kolor czarny
    Materiał stal
    Rodzaj magazynka mid-cap
    Pojemność magazynka kulek 100
    Pasuje do SVD / SVU

  • Recenzje

    • - 01.07.2025 napisał:
      In general the replica if fine, but instead of 410 fps it gives only 360-380. It's not as accurate as I expected but still pretty good. Depending on bb weight it shoots up to 30-35m. Sadly there's something wrong with my hop-up system as it doesn't work at all. Overall I think it's pretty good for this price 8/10
      Ocena opinii: 0
    • - 16.01.2025 napisał:
      Magazynek świetnie wykonany, solidny kawałek żelastwa, właściwie dbany zagwarantuje nam spokój, bez zacięć i innych niespodzianek. Świetnie komponuje się z SWD w klasycznym, drewnianym wydaniu. Lepszy niż polimerowe zastępstwa.
      Ocena opinii: 0
    • - 20.09.2024 napisał:
      Bezproblemowy Mid cap do replik SVD jak nie chcesz być grzechotką i biegać z Hi cap na polu bitwy bierz!
      Polecam dobrać szybko ładowarkę do kulek bez niej to nie robota :)
      Pojemność 100 kulek wiec na dłuższe walki polecam dobrać kilka magazynków
      Ocena opinii: 0
    • - 16.08.2024 napisał:
      Witam. Odwzorowanie perfekcyjne. Jakość wykonania perfekcyjna. Działanie perfekcyjne. Tylko kupować. Polecam.
      Ocena opinii: 0
    • - 30.04.2024 napisał:
      Zakupiona elektryczna replika karabinu SWD w wersji desantowej (Cyma) oprócz realistycznego wyglądu (z dedykowaną optyką) jest po prostu debeściarska! Jestem pod dużym wrażeniem. No i Sklep Taiwan G to porządna firma. Polecam firmę i strzeladło!
      Ocena opinii: 0
    • - 02.11.2023 napisał:
      Pasuje do svu. Dobrze wykonany, masywny, pasuje i podaje kulki 0.43. Lekkie luzy na boki gdy jest wpięty w gniazdo magazynka ale nie przeszkadza to w niczym. Dobra alternatywa dla magazynków od RS, o które dość ciężko w tej części świata
      Ocena opinii: 0
    • - 27.06.2022 napisał:
      Produkt dokładnie taki jak w opisie. Dostawa sprawna i szybka. Magazynek porządnie wykonany. Gorąco polecam. Wygląda solidnie (metalowa obudowa), dobrze podaje kulki. W sumie nie ma się do czego przyczepić
      Ocena opinii: 1
    • - 26.01.2022 napisał:
      Bardzo dobre magazynki pod katem wykonania oraz działania, naprawdę solidne i w super cenie, idealnie leżą w replice SVU Cymy, której używam właśnie z tymi magazynkami. Nie zacinają się.
      Uważam zakup za całkowicie udany!
      Polecam!
      Ocena opinii: 0
    • - 29.12.2021 napisał:
      Magazynki bardzo się dobrze sprawują podają wszystkie kulki i nie mam żadnych z nimi problemów nie latają luźno trzymają się na swoim miejscu ale też nie ma oporu aby je włożyć ;) bardzo dobre polecam ;)
      Ocena opinii: 0
    • - 24.06.2026 napisał:
      Feeds 0.36g BBs perfectly, no wobbling in CM057 SVD. Sturdy construction with good weight and easy handling, quite aesthetic as well. BB release is working fine, the spring seems.to be strong enough to reliably feed 0.4xg BBs as well.
      Ocena opinii: 0
    • - 19.03.2026 napisał:
      Mags don't malfunction and fit very nicely in the SVD/SVU. Fit is better than on much older 057 series, the current generation is good for what you get. To lengthen the lifespan of the magazine internals, I load them with only 90bbs.
      Ocena opinii: 0
    • - 22.01.2025 napisał:
      Even after a few months of using this majestic piece, CM.057S is still serving me really good, especially considering I haven't changed any internals at all. The external build quality is absolutely on-par with other high-end replicas I have laid my hands on, in many places even better, especially considering the price. Close to no wobble, the only place wobbling here is the stock and that can be easily fixed(with duct tape for example). The folding stock and a shorter barrel(comparing to regular SVD) is absolutely a life-saver, making it much easier to transport - saving a lot of space in gun cases and car trunks. This makes even storing much easier, as you can just fold it up and place it standing upwards.
      The internals are quite good, of course not the best, but an absolute bargain for the price. With a good enough scope, you can definetely make some great shots even right out of the box. The hop-up adjustment is quite stiff which makes the adjustment more precise which is important considering this is a DMR type rifle.
      If you change some of the internals this rifle can definetely serve you a lifetime, especially if you treat her right.
      Ocena opinii: 1
    • - 22.10.2024 napisał:
      This is a great gun for the money. The build is sturdy, there's no wobbling, or looseness. The battery compartment in the handguard is nice and roomy, and the dovetail on the side of the receiver is solid, and allows both AK and SVD style sight mounts. It's very accurate, and the hop up is super easy to adjust, as are the sights if you have standard AK style sight tools or a cleaning kit. This rifle compliments my Soviet era loadout nicely!
      Ocena opinii: 0
    • - 26.06.2024 napisał:
      Super happy with the replica, big thumb up for previous review of Filip & Asbjorn, QCS love it, I own earlier version of Cyma SVD and SVU with standard gearbox, installing a stiffer spring was not easy, but with this QCS gearbox, absolutely loving it.
      I had a problem with the hop up dial, it was dull/stiff/blockish, dissemble the unit and sandpaper some surface, works like a charm now :D My recommendation is atleast change the oring of the piston head, original one doesn’t work well (Too thick like previous review said) & get a nozzle(17mm) with oring. The stock is a bit wobbly, put little rubber behind the lock will do the job.
      Big applaud to Cyma, finally making some upgrade parts for SVD line like gearbox, piston, cylinderhead etc.
      Ocena opinii: 1
    • - 06.01.2024 napisał:
      A surprisingly cool replica for the money.
      External build quality is nice and adequate, the whole assembly system is well thought out(RS clone) and pleasant to work on.
      The newest internals are pretty nice - QCS(great!), steel rack piston, aluminium piston head and cylinder head. Piston head oring was too thick, porting didn't work and had to replace it for better results. Stock nozzle is without an oring, but had surprisingly good consistency and no power loss compared to a FPS softair replacement.
      Inner barrel is still slightly too long, but it's manageable. Cheekrest is a bit tall for use with iron sights.
      Stock it was shooting ~1.6J out of the box, not 1,8 but it's within norm, I guess.
      Ocena opinii: 2
    • - 28.12.2023 napisał:
      Feeds flawlessly in my Cyma SVU. Looks good. What else I can add? If you're looking for a mag for the Cyma SVD/SVU, this is the one. Good bang for the buck.

      When it gets used a lot it gives the magazine nice, robust look (that "war-torn" look with scratches etc.)
      Ocena opinii: 0
    • - 31.07.2023 napisał:
      The quality of the internals really surprised me! I was ready to upgrade almost everything, but the only thing I will be upgrading in the gearbox is the nozzle (it's plastic and without O-rings). The piston, piston head and cylinder head really surprised me, they look like they're high quality. The piston also had full steel teeth, not just the two steel teeth advertised in the description.
      The gearbox has quick change for the spring, it is the easiest spring change I have ever done in my life. Just pop the top cover off, and the spring guide is right there. Push it a bit, twist it and the spring comes out. It doesn't require much force, but still feels solid, so it won't come out unless you want it to.

      The externals are nice, don't feel too cheap but not top notch either. But for the price you really can't complain too much. You can get at least five of these rifles for the price of the new one from LCT, so this is far better value.

      Overall I think this is probably the best value I have ever gotten from a replica!
      Ocena opinii: 4
    • - 10.04.2023 napisał:
      If you want an SVD look no further than the SVD-S as it saves you from having to upgrade the air pressure to a point where you get no negative pull in the 690 MM barrel as the SVD-S has a more comfortable 590 MM barrel. It is also easier to store for people with limited space. Now if you just want a DMR and do not care for the model look for something else. SVD AEG's are hard to upgrade and their parts are spare. You will also obviously have a harder time mounting attachments that you might want. But again if you are looking to 100% buy an SVD AEG go for it its pretty good. Marking it as a 4 star here due to me having issues with the cables of the replica sent to me to the point where it did not shoot on arrival.
      Ocena opinii: 0
    • - 27.02.2023 napisał:
      A filler for an IED made of plastic and a metal shell, outwardly very close to the real one. The volume of fillers is sufficient, it should not be loaded with balls to failure if you want it to work without fail for several seasons for you. Due to the specifics of the outer casing, it cannot be disassembled easily for cleaning and spring replacement. Due to its size, it requires special pockets to carry the vest.
      Ocena opinii: 1
    • - 27.02.2023 napisał:
      Пълнител за СВУ изработен от пластмаса и метална обвивка, външно много се доближава до истинският. Обема на пълнитела е достатъчен, не бив ада се зарежда с топчета до отказ, ако желаете да работи безотказно няколко сезона за Вас. Поради спецификата на външният корпус не може да буде разглобен лесно за почистване и смяна на пружината. Поради габарита си изисква специални джобове за пренос на жилетката.
      Ocena opinii: 1
    • - 27.02.2023 napisał:
      Пълнител за СВУ изработен от пластмаса и метална обвивка, външно много се доближава до истинският. Обема на пълнитела е достатъчен, не бив ада се зарежда с топчета до отказ, ако желаете да работи безотказно няколко сезона за Вас. Поради спецификата на външният корпус не може да буде разглобен лесно за почистване и смяна на пружината. Поради габарита си изисква специални джобове за пренос на жилетката.
      Ocena opinii: 1
    • - 12.01.2023 napisał:
      I bought a cm.057s from you. low-quality product, the fuse is screwed very badly, after each shot you have to push the trigger back with your finger. instead of 440fps, only 410fps. the store employees have not checked the product.
      Ocena opinii: -3
      Odpowiedź sklepu:
      Please contact our customer support or technical department. It is possible to return a product and refund. Please complete the complaint form. Regards.
    • - 12.01.2023 napisał:
      I bought a cm.057s from you. low-quality product, the fuse is screwed very badly, after each shot you have to push the trigger back with your finger. instead of 440fps, only 410fps. the store employees have not checked the product.
      Ocena opinii: -4
      Odpowiedź sklepu:
      Please contact our customer support or technical department. It is possible to return a product and refund. Please complete the complaint form. Regards.
    • - 26.12.2022 napisał:
      Perfect, just perfect, no feeding issues, durable metal shell, can lift even heavy bbs, the lip that goes in the mag catch needs 1mm to be filed down to fit perfect.
      It completes the look of the svd, i like these overe the new polimer ones, but that's for my taste.
      Ocena opinii: 0
    • - 25.01.2022 napisał:
      I ordered this one for my own SVD made by RS. Original RS magazines are expensive and impossible to obtain, so this is good replacement. Requires a few minutes of filing as they are designed for Cyma, but the RS also fits perfectly in the finals.
      Ocena opinii: 0
    Dodaj opinię


Bezpieczne i świadome użycie

Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.
SKU: · EAN: - · [Zestaw] CM.057S [CYMA] + Magazynek midcap na 100 kulek do serii SVD/SVU AEG [CYMA] ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent
Osoba odpowiedzialna za wprowadzenie produktu na teren UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
Producent:

REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH

Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail [email protected]
* Ceny z podatkiem VAT, bez kosztów transportu